Foam nozzle Karcher Provided with high-pressure apparatus for contactless cleaning of different surfaces.This machine sprays soapsuds pollution substances in this foam is actively digested spots and allow to make contactless sink faster and more productive.
- Application of foam nozzles Karcher
- Specifications foam nozzles
- Instructions for use foam nozzle Karcher
application of foam nozzles Karcher
apply foam nozzle in contact cleaning.This action helps to clean the surface without contact with them, that is, without further mechanical stress on the surface.The advantage of this type of cleaning that completely eliminates the possibility of mechanical damage during washing.The most commonly used this type of car wash for cars.Contactless sink used in both commercial establishments and in everyday life.Pressure washing with foam nozzles significantly extends the life of the coating of the body.This also applies to most paint, and
The cleaning process and its duration depends on the level of surface contamination.If it is small, the whole process takes 3-10 minutes, if the global pollution and complicated, the initially applied pressure washing, and then the non-contact.For foam nozzles use different chemicals that match the type of laundered surface.
Specifications foam nozzles
most important appointment of foam packing - good foam that linger on the surface for the required period for removal of dirt.Poor quality or cheap tips do not create a foam product of their activity - liquid emulsion quickly runs down the body.This results in the need for repeated application of the foam, which leads to a waste of detergent.To avoid this problem, it is necessary to choose the foam nozzle Karcher pressure at least 70 bar, and the best fitting.The fitting for the attachment should only be original, because it is from this part depends on the quality of the instrument issued by the foam.
Material quality foam nozzle - nozzle made of stainless steel, brass nozzle, a tank of dense and high-quality plastic.When choosing a foam nozzle, should pay attention to its compliance with the existing models of high pressure, as the nozzle used in tandem with him.For each variety of baits such information is always indicated by the seller.
Instructions for use foam nozzle Karcher
Another advantage of the foam nozzles - ease of use.For example, such a device as a foam generator, will require certain skills and knowledge, it must be able to configure and know all about the correct use of the device.Foam packing such conditions are required.
To work with the nozzle first unscrew the tank to fill it in detergent.Funds are selected depending on the place of use of foam tips.The concentration of the chemicals is also selected on the basis of the application, hereinafter referred to as the flow of the foam can be easily adjusted in the most nozzle.For example, if one must wash or car 2, the concentration is made small, so that it is enough for the surface area.When using the nozzle for industrial purposes or for large volume of work, the concentration of chemicals in it do the maximum, reducing the supply of foam flow by turning the knob.
process of applying the foam nozzle on the example of professional equipment Karcher:
- foam nozzle is put on the gun and fasten using the cap nut with internal threads on the nozzle.Screw the nut on the corresponding external thread on the gun.
- To fill the detergent tank nozzle unscrews counterclockwise, it filled the necessary material, the tank is screwed back.When removing the tank is necessary to carry out all manipulations very carefully, because the foundation is made up of brass, and the tank is made of plastic.Improper handling of broken thread in the plastic container, the tank will be ruined, and the resulting chips clog the injector and bring down the entire machine.
- to adjust the required amount of foam produced, the rotary control.This function changes the liquid supplied from the device to a thick foamy head or very liquid soap solution, depending on what the consistency of the foam is needed at the moment.
- also adjusts the width of the jet and the range of its flight.For this purpose, the regulator spray.
- After adjustment of all parameters and the Gulf of liquid in the tank, start the washing process.To this foam was sprayed on the soiled surface and left for the required time.On average, small contaminants such as settled on the car body dust, enough for 2-5 minutes.
- After soaking time required, the foam is washed off with a water jet of high-pressure Karcher.