If you build a pool of concrete, you will need to perform finishing his cup.Finish the pool - not a simple procedure, because the inner surface of the structure is constantly exposed to the harmful effects of water and additional hydraulic load.Therefore, it is important to buy the right to use certain materials and technology jobs.Best finishes pool are PVC film, tiles and mosaics.We'll talk more about that!
- Plastering pool
- plaster grid
- plastering adhesive
- finishing materials basin
- Tile Mosaic
- PVC film
- Finish pool with their hands
- Wall pool
- finishing bottom of the pool Finishing of the pool
- PVC film
Any casting of the pool did not turn out perfectly flat, so the first step is the alignment of the decorating the walls.In this case, a method of applying an adhesive plaster or plastering on the grid.
plaster grid involves the use of conventional sand-cement mixtures.Howev
Therefore, the grid should be applied anticorrosion coating, but, nevertheless, such an outcome is possible.To solve this problem is to achieve improved adhesion by creating a bit of a rough surface of the pool.You can not use steel, glass or a synthetic plaster mesh, as well as water resistant plaster mix compositions which have good adhesion to concrete.
adhesive plastering technique is as follows: the concrete surface before the plastering is necessary to clean and process the special impregnations that have deep penetration.Such impregnation in the structure have different polymers: acrylics and epoxies, urethanes and others.They are able to create an adhesive layer to which the glue layer should be aligned.
There are certain requirements for the quality of the plaster work.When plastering and finishing the pool is not allowed bulges, hollows and cracks.Small irregularities of up to one millimeter are allowed in an amount not more than 2 pieces by 4 square meters.Vertical surfaces may be with deviations no greater than 1 mm per meter.
finishing materials basin
trim individual pool is usually carried out a glass or ceramic tiles, PVC film or mosaic.Rarely is a natural stone finish, for example, marble.When choosing colors, preference is given to various shades of blue and green, which give the impression of freshness and deep sea.The darker the color you choose, the pool will look deeper.
Design and walls around the perimeter of the pool can be made of exotic woods or coping stone.Plants should be planted around the pool in such a way to create a protected area, the effect of the illusion of peace and solitude.You can decorate the pool evergreens and colorful ornamental shrubs.On the one hand it is possible to perform the Roman ladder which is immersed in water.
Tile Tile is laid not in the pool as in the bathroom.Here we have to take into account the peculiarities of the mechanical action of water on the material.The walls of the pool under the pressure of the mass of water bend a few millimeters.Thus, the tile is placed at a certain distance between themselves and the grout and adhesive selected poelastichnee.Otherwise, the coating will not stand in the basin of the loads, and will be covered, as well as the matrix of the mosaic, microcracks.
tiles for decoration pools need to take a special porcelain, as it is more dense and less water absorption than conventional ceramic cladding bath.By the way, a simple porous tiles quickly absorb water and become a breeding ground for algae and micro-organisms.
porcelain tile more cold-resistant and heat-resistant, which is especially important for outdoor pools, have a high plasticity and do not absorb dirt.Next to the pool and place lift-descent taken to lay the tiles with anti-slip grooved, rough surface.
Mosaic Mosaic is considered a reliable wear-resistant material suitable for lining pools.For the pool made to buy a glass or ceramic mosaic on the same reasons as choosing porcelain tiles.This mosaic has a higher density, little dirty, and do not spread the fungus.Basis for preparation of the base of the basin to furnish and mosaic tiles are the same.
It does not absorb water glass mosaic.The cost of this mosaic is quite high.Impressive price of work on laying the pool similar material over time it will pay for excellent appearance and durable quality.Mosaic pool is good because it can help to create any ornament and pattern.In addition, a mosaic oblitsevat any curved surface and inaccessible corners for normal tiles.
Pools can be covered not only the mosaic or tile, but also PVC film.This material is lightweight, good waterproofing properties and bearable price.However, the film on the walls will not last forever, the term of its useful life - approximately 7 years.It is best used for the indoor pool.
film thickness is 1-1.5 mm and consists of four layers which contain particularly durable layer of synthetic material - poliesterola or Kevlar.The film is resistant to chemicals and UV radiation.Coverage is not attractive to harmful microorganisms and easy to clean.
market of modern construction and coating materials offers two types of film.PVC film is made on the basis of plasticized PVC and has a special impregnation, which protects the pool from the negative influence of fungus, bacteria and spores present in the water.The color palette is varied and you can choose the material according to your fantasies and preferences.
Butyl tape is characterized by improved performance durability and plasticity.It can be easily cut with scissors and glue.This material is essential for large tanks when the forefront strength.Butyl rubber film is not terrible seasons, it brings great variations in temperature and pressure, so is ideal for use on any surface, even during the harsh winter.
Finish pool with their hands
When the pool is built, put a layer of plaster above one of the following methods, created a waterproofing layer and the lining material can be selected with peace of mind to start his finishing.Mosaic tiles and keeps almost the same, but work with PVC film, of course, has its own nuances.Below is a brief instruction on the implementation of finishing the pool with their hands.
pool facing the pool usually begin 1-5 days after the application of plaster and waterproofing composition.Mosaic and tile must be placed on special glues or cement-sand mortar.
Facing taken to make horizontal rows, starting with the walls.With plummet and nails need to install vertical beacons, and then the upper edge of the horizontal cord hang-prichalku made of ordinary fishing line.In the process, the scaffold should be moved up row by row, to control the straightness of the joints.
adjacent tiles must be oriented with the entire plane vertical proveske and cord-prichalku, rebuff tiles to the desired level should be lightly tapping the handle of the blade on it.The thickness of the seam facing fixed two steel pins or studs of the same section.Joints recommended fill solution only half the thickness of the porcelain tiles.After the number has been laid to tile should make rail and besiege it to the desired level.If
important pattern and symmetry, then start to finish the pool with their hands from the middle row, and complete a series of corners already halves or thirds tiles.Although full-length to calculate the right amount of tiles standing in a row from the start.In this case, do not have the material to cut, and the pool liner will look neater.The joints that are formed between the stacked tiles, made to handle frost and moisture resistant grout that color combined with tiles or contrasts with it.
finishing bottom of the pool
requires special attention to her styling bottom of the pool, it should carry out in the corners of the triangle, not rows, or "in an envelope."This applies to the case when the floor of the pool is not flat, but has a bias towards the hole to drain the water.
If a drain hole is located in the center of the basin, then to start is to identify and mark the cutting line connecting the corners of the structure with opposite corners drain holes.After the bottom of this markup will be conditionally divided into 4 triangles - on them and make the lining.
Each triangle laying tiles start with a series of wall, making no bias.Further decided to spread perpendicular to the row number lighthouse.Referring to the number of tiles in majachnye necessary horizontal surface lined triangle with irregularities in the edges of the tiles.Other similarly triangles begin to spread to a number of wall and lighthouse.
Features Pool PVC film
Stack film taken at the carefully polished surface, as otherwise it will rub uneven in places.First, the surface of the pool should be attached with screws fastening strip which consists of a metal strip that has a length of 2 meters, a width of 5-6 centimeters and a thickness of 2 millimeters.
On the one hand on the strip must be applied to the plastic coating.The film is not glue to the surface, and they cover the inside of the pool, holding tightly to the walls of water.If the bottom has a complex rugged terrain, the installation of the film should start from there.Under the geotextile material is placed - a polymeric nonwoven web that has a thickness of 0.5-1 cm.It is able to protect the film from damage and condensation.The edges of the film to cook with hot air and liquid plastic trowel to completely seal.
PVC film is also used in the reconstruction of the old pool, or finishing the pool with their hands, which is tiled and has problems with waterproofing due to the formation of cracks.The film in this case is laid directly on the tile.In order not to overpay for further shortcomings and mistakes to your attention the video on finishing the pool.
Thus, facing the pool is a very time consuming process that, in spite of this, the power of each inveterate and hard-working developer.After reading the article, you learned how to wisely choose the material for finishing, because the market offered many different options, and how to put a coating on the conscience, to not leave the water.It remains only to see the photo finish of swimming pools and you can begin to perform work.