construction plan bath or process is already in full swing?Or maybe you're already a lucky owner of a private steam rooms, just feel that something is not right, and hands and finish stretch, alter, improve.Keep in mind, effective insulation of baths - a pledge of high-quality warm-retaining heat and economical consumption of fuel materials, the prices of which, incidentally, is constantly growing.Insulation of walls in the bath is somewhat different from the usual thermal insulation of construction, all because the climate in this room special.
To produce wall insulation baths with their hands properly and effectively, consider the specifics of the process, paying attention to the nuances that arise when using different heaters.
Wall insulation baths done inside and out.Features thermal insulation is directly dependent on the material from which the building is erected, whether brick, wood, sandwich panels or, for example, cinder block.The best o
- external insulation
- How to insulate wooden bath outside?
- How warm bath brick exterior?
- How warm bath outside the carcass?
- internal insulation
- Warming bath brick inside
- Warming bath panel walls inside
- Warming frame wall inside the bath
- process of warming bath of timber
Precipitation, drafts, cold - the main enemies thatcan interfere with quality recreation in the bath.Wall insulation to the outside of the bath brick, frame and wooden buildings is somewhat different.
How to insulate wooden bath outside?
for external insulation of wooden baths are generally used mezhventsovogo insulation.The most common - a jute.Low thermal conductivity, excellent cooperation with the moisture - are the main advantages of this material.And if the jute add special materials containing flax fiber, by its positive properties to add also strength, elasticity, firmness.
Wall insulation bath through jute or lnovatina lnodzhutovogo felt carried by the following technologies:
1. Laying mezhventsovogo insulation.
2. Treatment of joints.
3. Stuffing jute fiber seal.Caulk need, from the bottom, is gradually moving around the perimeter.Otherwise the frame may skew.
4. Processing caulked seams using a sealant.
How warm bath brick exterior?
high thermal conductivity of bricks require additional insulation, otherwise we will have to build a very thick wall, or splurge on energy.Bath brick wall insulation technology involves the use of a ventilated facade.In general, after wall insulation must represent a kind of "pie": bricks, insulation, insulation, exterior finish.
Mineral wool - that this material should pay attention, if you do wall insulation in the brick bath.
warming process itself involves the following technology:
1. Strengthening the wall angle brackets.
2. Insert between the squares of insulation mats.
3. Bonding the joints between the mats or special adhesive tape solutions.
4. cording wall waterproofing layer.
5. Installation Corner special guide designed to hold additional insulation and acts as a basis for fixing the façade cladding.
If internal insulation penopolistrol strictly contraindicated, since it is not resistant to high temperatures and toxic, then the external insulation can safely use it.
How warm bath outside the carcass?
External wall insulation framing bath is best done foam.In such a case, the decisive role of this material is easy.Although there are more advantages, such as low thermal conductivity and gidroottalkivayuschie properties.
technology insulation framing bath foam plates will not give you the slightest trouble.Insulation just glued to the wall or mounted on the screws, as shown above, and the top is applied decorative plaster or wall cladding.The downside of the foam is its fragility, which requires increased caution when working with this material.
Because the bath is always a high temperature and humidity, insulation of walls inside the bath must be done taking into account these features.Another nuance is that paroizolyator and insulation, laid horizontally from top to bottom.Home paroizolyatora wall layer should overlap the edge of the ceiling layer paroizolyatora.
process insulation brick baths inside
Brick building baths requires obligatory internal insulation.If the insulation you choose expanded clay, slag or a mixture of lime and sand-fluff, they are put into the inter-wall space.The material is placed in layers and filled with mortar.
the picture: 1 brick wall 2 - insulation.
heater in the form of plates can be fixed in two ways: by means of clamps or specially designed bundles of synthetics.Cut strips of plate installed between the insulation and the wall.
Excellent tool - liquid insulation Keramoizol.It can withstand temperatures of 260 degrees, which means it can be used for thermal insulation of brick or panel walls in the bath.
Warming bath panel walls inside
Panel wall bath suggest that the insulation is between hydraulic and vapor barrier layers.The main requirement for the material from which made the insulation - easy.Most often it is - polystyrene, mineral wool or reed plate.An additional requirement is that the processing of insulation milk of lime and a good dry.These actions help to increase fire resistance and protects against decay.Panel waiting room walls are sheathed with plastic, can also cheaper options, for example, water-resistant plywood or fiberboard.The room for washing and steam room in the most used Planed boards.
Warming frame wall inside the bath
Choosing insulation for partition walls bath, you need to take into account the peculiarities of the temperature in your area.In cold climates are proven fibrolitovye or reed plate.Since the 10 cm frame wall with reed insulation - is the same as that of 50 cm. Solid brickwork.In warmer areas, it is recommended to use plaster, cement, sawdust, shavings.Mixed with plaster or lime dust in the ratio 10: 1 backfilled in 20 cm of space between the inner and outer wall sheathing.
addition of insulation, frame walls require mandatory paroizolyatora.Roofing material, a film of polyethylene or asphalt layer placed between the thermal insulation and wooden paneling.
process of warming bath of timber
the picture: 1 - fibrous insulation, 2 - foil vapor barrier, 3 - wainscot paneling.
construction market offers a myriad of heaters for baths, but perhaps the most popular pictures are the mats of glass and mineral fibers.The main advantages of this insulation are: ease of installation, flexibility, thermal insulation properties and fire safety.In addition, there are now on the market materials, when one side of the mat is already covered with foil perfectly reflects heat while serving paroizolyatorom (Isover, Ursa, RockWool).Some experts argue that the fibrous insulation and subside within a few months, they are of little avail.It is therefore important to use a complex thermal and moisture barrier.
process of insulating walls bath with fibrous insulation is carried out according to the following technologies:
1. Install a custom frame fixing.The frame is made of 50x50 boards, nailed vertically to the inner walls of the bath with a gap of 55 cm.
2. Installing insulation.
3. Sealing the joints formed between the frame and insulation, construction tape.
4.Montazh foil insulation.
5.Nabivka lining on the frame.
for insulating walls of the bath timber using different thicknesses of insulation.Thus, the outer wall insulated layer 10 cm, and the inside is sufficient and 5 cm.
Prerequisite is an air layer, which remains between the wall and the insulation layer - 3-5 cm.
For optimal insulation fibrous insulation double layer stack.When the inner layer does not imply any foil, otherwise it will cease to allow air and moisture will begin to accumulate.
properly insulate the walls of the bath, you and facilitate your work by igniting the room, speed up the process and save fuel.