If you want to build a bath on each visit, which will experience only positive emotions for many years, during the construction phase should be taken with the utmost seriousness to every detail.Even the doors from hinges and finishing furniture, must meet certain requirements.Of course, much easier to buy a finished canvas, but in this case is a risk of running into a low-quality products and after a few years to get back to the choice of bath door.The vast number of consumers have complained that bought the door quickly crack and slits formed therein, finally, that they simply are not designed for those changes in temperature and humidity that accompany each bath.Only by making the door to the bath with your hands, you can be sure of its quality and make it not so difficult.
- loyalty to tradition and modernity following
- Wooden doors - solidity and solidity
- Glass doors - the style and modernity
- Combined door - comfort and elegance
- How to choose the right material for the bathhouse door
- Features bathdoors
- Technology of doors for bath
- Making frame doors
- Production of single-layer wooden doors
loyalty to tradition and modernity following
Before you start manufacturing doors for the bath, it is necessary to decide on its design.Now bath rooms are two kinds of doors: wooden and glass, all the rest - these are different options to combine these materials.Each type has its advantages and disadvantages, and make certain choices should be determined only after the detection of the benefits of using a particular material.
Wooden doors - solidity and solidity
time immemorial, for the manufacture of doors for bath use wood.People have gained enough experience to make them resistant to high humidity and hot steam.Most often enough and one leaf, but if the room is heated in the smoke, in order to be able to while washing ventilate the room, set another, more narrow.
Important: whichever door you choose, it should only be opened outwards.
quality wooden doors well keep heat in the room, besides, they do not heat up to high temperatures that can leave burns on the body.Saunas with wooden elements look very easy, of course, but at the same time extremely cozy and comfortable.They leave the feeling of solidity and reliability, and in terms of functionality are superior to the door of any other material, since, firstly, they contribute to the free circulation of air masses in the bath rooms, and secondly, the air is saturated with a pleasant aroma and ensure natural regulationhumidity.
Glass doors - the style and modernity
Glass in the production of sauna doors started to be used recently.This is due to the fact that not all glass is suitable for this purpose, you can only install the heat-resistant and have increased resistance types.The great advantage of this material - a long service life.Besides room where the glass doors look quite special: a stylish, modern and extremely roomy.The boundaries of even the most compact pair can visually push installing glass doors in it for a bath with his hands.
When compared to wooden doors, the significant disadvantage is possible to name a high thermal conductivity of the glass.Glass doors must be fitted with wooden handles, or when you open them, you can get severe burns.
Combined door - comfort and elegance
Combined doors - ideal for those who can not dwell on any one thing, or for those who want to combine excellent functional characteristics of wood with exquisite glass doors.Of course, such structures are much more expensive, but their design can be matched to any style of the main bathing areas.Various combinations, carving, pattern on glass, a variety of shades - anyone can pick up a door to suit personal preferences.
How to choose the right material for the bathhouse door
Despite the fact that high-quality glass door at home is very difficult to make, many craftsmen still interested in the question how to make the door to the bath of glass and how it is the mostto choose the right glass.For baths should only buy tempered glass, it has a high resistance to mechanical damage, is not afraid of changes in temperature, even in a very large range, and does not disintegrate into sharp shards when broken.Most often, it has a warm bronze color, but the baths look more profitable options for matte and tempered glass such as transparent, too, can be found in today's construction market.
Speaking of wooden doors, then it is better made of hardwood: oak, linden, alder or aspen.Coniferous varieties saturate the air viscous scent that, in principle, very well, but at the same time, such a door after a while starts to "cry" trickle drops of resin.Although many people is what attracts and they, on the contrary, prefer to install in your bath, wooden doors and other decorative elements made of softwood.The most expensive is considered wood ash, cedar and Abasha.Abashev - the undisputed leader among the varieties of wood thermal conductivity, as well as its high resistance to rot and deformation caused by microclimatic differences.A good alternative to expensive Abashev is oak.The wood is only slightly inferior in characteristics, but at the same time provides for a more affordable price category.
When choosing a tree, you should pay attention to the following points:
- boards and the boards should only buy dry.
- On the surface of the material should be free of mildew or rot.
- not recommended to buy timber with knots, as they usually drop out after a while.But if you can not buy a good board, the knots of the wood better immediately and pull gently, brushing glue set back.
Features bath doors
During the construction of baths generally tend to reduce the possible heat loss to a minimum to save on fuel during operation.It touched this door, because each of their discovery is accompanied by a huge release of heat to the outside, which is particularly noticeable in small buildings.That is why the entrance door to the bath make much smaller than any of the other buildings, even if they are equipped with dressing room.The most optimal size - 1800 mm in height and 800 mm in width.If
door dimensions should be less than the other door, the thickness of the web, on the contrary, a little more.This will retain heat longer.
Door leaf should be very closely adjacent to the opening.Availability nut necessarily its top edge should be located at floor level.If the room is heated by the smoke, the threshold can be omitted to provide an additional ventilation of the room.
For security reasons, in any case can not be installed on the doors of bath English castles.For the same reason you can not install a bath outside latch or lock was "pinwheel."To maximize press the door to the jamb, it is recommended to install in just two of the castle: the top and bottom.This bottom heck or hook can be metal, but only the top timber.All pens must be made of wood, it is not heated, in contrast to other materials.
Technology of doors for bath
Now you can go directly to the assembly of the door.In total there are two types of door panels, which are installed in the baths:
- single-layer structure, made of tightly shot down each other boards;
- laminated doors, consisting of two frames and thermally insulating material.
steam for better use a second method of manufacturing the door, and for the remaining rooms will be enough to establish a normal plank door.
door frame for doors in a steam room, you must first prepare two frames.For this we need eight horizontal and four vertical bar sizes 40x60 mm.Before assembling frames all need to smooth out the rough edges.The easiest way to do this with an edge cutter, but you can do any of the available tools.This operation is not likely to cause any problems, the only caveat - the corners are connected overlap, the method of connection - "tongue and groove".
We need two of these frames: one - the inner and the second - external.The outer frame is sheathed on both sides of sheets of particleboard or fiberboard, not forgetting to arrange between the insulation (foam, mineral wool or other insulation).The outer and inner frames are fastened together, and between them is placed as a layer of insulation and vapor barrier layer materials.
outside this door or clapboard clapboard.This board should fit tightly as possible to each other.
Tip: To ensure a tight contiguity boards need to be sure each side handle jointer.
By the way, before a door for a bath, all wood must be soaked in antiseptic compounds, and the inside and linseed oil.
Important: wood tends to swell with excess moisture, so the manufacture of doors is better to underestimate the dimensions of 5-7 mm.
builders usually start with the door trim boards simply put them on the glue, without taking into account the fact that under the influence of hot steam, they can keep up with each other.There is a way, however, is quite time-consuming, it is preventable.On both sides of each plank are selected quarter of the mirror, then they are placed close to each other so that the gap between them does not exceed 1 mm.
Tip: lest we forget, in what order they were laid during the fitting of their recommended numbered.
now thoroughly coat with glue all the contact surfaces again and collect the canvas.To be pressed firmly against the boards to each other, collect them between two boards, the distance between them is 15-20 mm greater than the width of the door.After assembly between bars and the web trying to drive a few stakes, up to a maximum connection between the boards themselves.To ready the door leaf frame attach with screws, with pritaplivaem them inside.Afterwards head screws will need to putty.
If bath is operated in a mild climate, it is possible to dispense with a door frame, two sash designs increasingly used in regions with very low winter temperatures.
Production of single-layer wooden doors
For manufacturing these doors, we need boards of the same width.Of those Scrollsaw pieces of required length, and carefully handle all saw cut plane.Similarly to the above process collect door leaf.After drying glue remove all the irregularities using the jointer.
To strengthen the boards together at the top and bottom nailed two transverse strips.
Tip: screws, nails and other hardware used in the construction of a bath only with a special anti-corrosion coating.
Then there are two ways to complete the work:
- Manufacturing binding.
- Attach the ends of the horizontal bars.
At least one of these options to perform, as this will extend the life of the door leaf.
Important: When trim bars should be connected to each other by selecting any quarters, or if there is the appropriate equipment, means "thorn in the groove".
All we clean the door and impregnate several layers of varnish, it can now be put in place.The number of loops, which will hang on the resulting structure depends on its weight.If you wish, you can decorate the finished door carving and interesting décor, suitable for general interior bath.The installation in detail in this article, we will not be considered, but will provide a video demonstrating in detail the process.
As you can see, the production of doors for the bath is not particularly difficult, even for the inexperienced builder, so this phase of construction can safely perform on their own, without the services of professionals and this will at least for a little bit lower costs.