Shower in the country - an essential attribute of comfort and a great opportunity to take a refreshing dip after the garden work.However, not every owner of a house surrounded by nature boasts a convenient shower, grants the powerful spirits and positive energy.However, if you know the problem is not hearsay should not despair - it is fixable.And to help in this modern material - polycarbonate and useful information on the topic.
- Shower Polycarbonate: features
- How to build a shower of polycarbonate?
- develop projects
- Equips shower stall
- Outdoor Shower: use not only in summer
- Select tank
- How to heat water?
- Making drain
- What good souls of polycarbonate?
- Outside shower of polikrabonata: Video
Shower Polycarbonate: features
Before talking about the construction of the soul of polycarbonate with their hands, you need to figure out what kind of material and what are its characteristics?
Polycarbonate - plasti
- ease.Cell polikrabonat lighter than glass 6 times, allowing you to create interesting designs that weigh almost nothing;
- strength.The molecular structure guarantees high impact resistance.Sheets are able to withstand the impressive weight and wind loads;
- sound and heat insulation.Due to air filling internal voids, acoustic and thermal insulation characteristics of the synthetic polymer at a high level;
- flexibility.Plastic Sheet provides the ability to build structures of complex geometries;
- wide temperature range.Polycarbonate can withstand a temperature range of -40 to +120 degrees.
complete the advantages of easy installation, simple tastes care, resistance to chemicals and atmospheric precipitation, security.
How to build a shower of polycarbonate?
If you want to build a cottage shower made of polycarbonate, it is possible to realize the dream of two ways.The first - a light summer shower with a small water tank.The second - the construction of a more substantial foundation and heating.
Equally important is the location of the cabin.It must be protected from the wind, well, if the territory is warming sunlight - a hot day in the evening you can take a dip in the warm, pleasant water.To organize a good flow, choose a place on the hill.
first step towards the realization of the desired, namely, the soul to give polycarbonate - project.Incredibly, even an elementary schematic diagram is able to facilitate the construction of buildings.
Shower should not be close.The best option - when even the highest member of the family is free to bend down and raise your hands.
This is important!
most common sizes of washing up 1 m2, height - 2.5 meters.Whereas for the locker room is enough space 1h0,6 m.
constituent elements of design - the moment an individual.But the hottest option - cabin, sink and a stationary barrel for water.By the way, in the development of the project, consider a source of water and place the drain.Ideally, if the drain is not far from the sewage pit.
Equips shower stall
Mark up the territory and set the pier foundation.In the corners of the rectangle obtained trying to drive stakes of wood.Pre-treat them with antiseptic solution and moisture repellent.Putting a metal frame, bonding parts with long bolts.Inside the frame is made dressing, which will serve as a base for the floor.
between bearing columns stacked mowing, and on them - lags.For the smooth release of water into the drain Do floor holes - Lay the joists with a short interval.The only thing to take a shower with the floor in cold weather because the air flow from the bottom is not quite nice.
can build a floor so that water passes through a tube to drain.Do not forget about the rational use of water resources - water after taking a shower can be watered garden.
If you choose a design with a dressing room, then to separate the two spaces need to build a nut.So water will not get into the locker room and soak clothes.Pay special attention to the door structure.Closes it should pretty tight.The best option - the door with contact seal.Heat is securely held inside the cabin, and the flap is not rasklinit from moisture.
Outdoor Shower: use not only in summer
If the warm cabin, the summer shower made of polycarbonate can be used not only in the summer.As a heater used polystyrene foam that fills the frame compartments.Plates closing film that protects from moisture and steam.
If desired, decorate the booth PVC panels, washable wallpaper, linoleum, oilcloth.The choice depends entirely on your preferences and capabilities.The only condition - materials should be moisture resistant.For fixing use stapler.
This is important!For the construction
better to buy polycarbonate thickness of 8-16 mm.The walls are made of frosted, and the roof of the cell (transparent) polycarbonate.
rooftop mounted water tank heated by sunlight.Due to the tightness booths providing constant temperature is not a problem.
As mentioned, the tank is installed on the roof.Previously, water had to dial by hand, but today the situation is different.The water is supplied directly from the mains supply or is pumped.Sanitary valve stops the supply when the tank is filled to capacity.
regard to the material and shape, the barrel may be cylindrical, flat, made both of plastic and metal.Especially convenient flat plastic bins.They are easy to transport, install and remove.Only the shower with tank will have to set the winter.
Drums bulky and heavy, the annual demand of sanitary services.The water is heated longer, but cools down slowly, which is also important.
How to heat water?
one sun for an effective warm water is often not enough.To increase the heating rate under the tank mount "greenhouse".Uncomplicated design of polyethylene strips and increases the temperature of water by 10 degrees.
increase that also contributes to a sheet of foil or a mirror mounted on the north side.Do not forget that hot water is always at the top, so do not be lazy to provide container float.Warm water will be used primarily as rise and cool to warm.
If your plans include exploitation of the soul in the winter, then drastic measures are needed.In the role of the heater can be a large boiler or heater from the washing machine.In the first case, the tank should be divided into two zones: cold and hot water.
This is important!
to heat 50 liters is required half an hour and the water heater capacity of not less than 2 kW.
extreme caution.Insulate the wire harness and use the correct section.
Waste pit - it is certainly convenient, but not practical.Water should go first to a small indentation and then in the compost pit.Next to the sink are drainage and septic tank.Under the shower have prohibited them - the water will flow into the septic tank, the unpleasant odor.Note that the volume of the compost pit must exceed the volume of the tank water twice.
Do not forget the waterproof layer.This can be concreted slope gidrostekloizol, roofing material, the film.
What good souls of polycarbonate?
work is finished and you are the proud owner of a comfortable shower enclosure consisting of some advantages.Shower Polycarbonate is not only durable, but also aesthetically pleasing, hygienic, is not afraid of direct sunlight, and extremes of temperature.In short - a dream.
versions can be varied.Choose the one that fits your idea of the perfect island of coolness and courage.Watch the video submitted and enjoy country life and maximum comfort at any time, anywhere!
Outside shower of polikrabonata: Video