the winter cold in most parts of the country reach the highest level.It was during this period, most of our compatriots want to take a steam bath.When the furnace bath is not important to the cold seep into the waiting room on the floor.And the more you heat the bath, the frost with more force will be making their way into the room.Therefore, the door to the warm bath is necessary for each owner of such buildings.And such work is a guarantee of reliability, good quality and good light steam.
- Reasons insulation bathhouse door
- ideal door to the bath
- Replacing the door frame
- Making a two-chamber door
- Heat curtains for doors
- Warming doors in the bath
reasons bathhouse door insulation
After steaming bath and warmed a person goes to the dressing room to get dressed.But just before he had to sit in this room, relax and dry off.You can then get dressed.But when in the dressing room warm and cold air is walking across the flo
If the door to the bath is not insulated, feet will freeze when the sweat flowing from his face.This can cause the common cold.What to do in such a situation, how to keep the precious warmth and get rid of the treacherous blowing and drafts?This issue owners baths decide differently: someone is trying to hold the main door insulation, some prefer to put a second door, while others just hung a blanket over the door frame.However, such techniques do not prevent the penetration of cold air into the dressing room.
Because of frost occurring on the inner surface of the bathhouse in places touching the door unit and linens, door frozen.So open the door bathhouse without the use of specialized tools fail.Make a door that will protect from the dressing room and accumulations of frost penetration of cold air is actually very easy.It is necessary to insulate the door to the bath with his hands.
ideal door to the bath
Make the door to the bath low and narrow - dimensioned reduce output warm air out and prevent the penetration of cold.The front door bath usually opens outward.It explained the safety rules - If a visitor sauna becomes bad, it will open the door a push and let the room cool.
best to make the door to the bath of deciduous woods because conifers can release when heated resin.No matter what material you used for the construction of walls bath, they should necessarily be protected from steam, smeared with a mixture of sawdust and clay, as well as warm in the future, without forgetting the door.Next is to make sure that the door to the bath was fitted tightly into the door frame and the cracks did not arise.Keep in mind that panel doors are better able to maintain internal heat.
Replacing the door frame
When Russian bathhouse there is high humidity, then the box door will rot.With proper gathering bathhouse from a bar, it will be difficult to replace the door frame.First Saw pritolochny beam width of the box and the threshold, if there is no damage to the side plates.Otherwise, you need to be sawed in half pritolochny bar to get out of the nest box.Better not fixing thorns timber sawing off because they are responsible for fixing the box bathhouse door.
production versions of the new box - two.According to the first, in the rod should be cut using a cutter grooves, the amount of which is equal to the doorway.After creating the components of the door frame, it is necessary to collect them in a spike and attach from the side door of the porch.The remaining space between the door frame and the wall should not be greater than 5 millimeters.It is usually fill with moss, rags or foam.On the opposite side is a bar attached.
Under the second option a new box is manufactured without the timber.Instead, it is possible to prepare a board, which has a thickness of 50 millimeters, it is left for a quarter of the porch, and then everything is collected, how it is accepted to do in the first situation.For fixing screws must be used, then the connection parts will be denser.
Making a two-chamber door
As a result, a large temperature difference and high humidity common door sweats drops of water flow down and freeze, making it difficult for a tight closure or opening of the door to the steam room.When installing a second door in the bath, the problem is solved partially, but there is a new - creating a gap in the bath door to high humidity, which is why they are easily damaged.
For installation in bath is perfect simple two-chamber door.Such a model can be done in-house, for example, of inch boards and MDF with insulation.This design is able to smooth out large temperature contrast in the cold season.
To produce a two-chamber need bathhouse inch board.It needs to be sawed in half along and then whittled to 15 millimeters.Such work can not do if in the block instead of 40 millimeters choose quarter, which has a depth of 60 millimeters.At recess in block quarter, the board planing is not necessary.Then make two identical frame to the door of the pre-arranged bars.At its discretion, create spikes for the connection.
On the basis of the size of the door had three blanks.To collect the first of them put the front side on a flat surface down, then lay on her door frame and lightweight synthetic fill insulation.Then lay the second blank assembled from two parts, which are usually staple secondary partition door frame.
Then lay the next door frame, filling the voids, and close the entire structure of the third workpiece face up.You can attach these parts in any way, but it take nails and screws should not be through, but only up to half of the next frame.Treat the ends of the finished design emery cloth, then prime with and paint, awnings and attach the handle and put the latch or lock the invoice.Then you can sew two-chamber door.
Heat curtains for doors
To reduce and prevent access of cold air, you can use a simple method of warming the door to the bath, but quite effective.First cook on the block in a waiting room of bath door sealing frame.If the external size of the bathhouse door is 180 by 80 centimeters, to be cut into strips of soft insulation in the amount of four pieces to the sizes: 2 pieces of 10 100 and 2 pieces of 10 to 200 centimeters.
Then nail strips of insulation around the bathhouse door with small nails on the perimeter of the box, given the distance from the edge of the box, which is equal to 2 centimeters.Then prepare four bars of wood - the measurement 2 2 2 184 cm 2 - 2 2 80 centimeters.Arriving at the top of the bars along the perimeter insulation of the box door.Bars Wrap insulation, trim excess and press the edges with the help of cashing on the outside.The result is a rectangle with a heater.
for further work and proper insulation of the door in a bath you need a thick cloth, for example, Colour Options, which are made of fabric, with a screen size of 120 by 200 centimeters.Stitch counting tissue that was able to accommodate a bar which has a size of 2 by 2 to 200 centimeters.Place it and fix.Then attach to the wall with the right side of 10 centimeters from the cashing, pressing the edge while using decorative slats.
to the upper edge of the fabric sew 7-8 rings.At a distance equal to one diameter of the ring on decorative rail tighten screw 60 millimeters and 20 millimeters leave outside.This metal screws, attach a length of wire that has a length of 100 centimeters, pull it through the screen simultaneously cashing ring and attach it to the screw.In two places to the left of the door to the bathhouse baths attach two rubber bands with hooks or springs.Opposite these hooks sew the ring to the screen.
Slide the screen made for the door.This situation is considered to be non-working fabric.Screens for protection against freezing air should be moved to the left, to fix the fabric on the hook in such a way that it fits snugly against the sealing frame.In this situation, the door from the inside will not fog up and freeze.
Warming doors in the bath
Today, the market represented a huge range of insulation heaters of various types and purposes.In such a variety of simple man in the street it is quite difficult to understand.Depending on the initial raw material and production technology, distinguish the following types of heaters: extruded polystyrene, expanded polystyrene, basalt insulation, staple fiber, foamed polyethylene foam.
choosing a heater, it is recommended to rely on the following points.The first criterion - a flammability.Materials made of expanded polyethylene foam used in the temperature range -60 - 100 degrees, and a conventional extruded polystyrene penopolistrirol - at a temperature of -50 - 75 degrees Celsius.
Then pay attention to the water vapor permeability: expanded polystyrene foam, and are able to create a kind of "greenhouse" effect, since by themselves do not pass the steam that comes out of the bath.And so the wooden door, which is adjacent to a heater, dampen and, therefore, reduced the term of its useful life.
depending on the design of the door, the door insulation technique for the bath also is different.The first way - the insulation is laid into the inner chamber door.The second method - a heater is mounted on a wooden door with the help of dowel-nails close to the top of aesthetics somehow decorative coating.A third method - can additionally be formed from a block of wood on the door frame, put into the insulating material and close the top sheet material, for example, plywood or fiberboard.
We choose the latter method that will tell you how warm the door to the bath.On the bathhouse door frame of the nail bars, which have a thickness of 20 millimeters.The outer boundary of the frame should be different from the border of the door leaf to the distance of the porch - about 15 millimeters.Along the perimeter of the frame needed to nail using aluminum nails collapsed half a heater that it extends over the edge by 15 millimeters.The emptiness of the frame and install insulation.
In this frame with insulation then place a sheet of plywood or hardboard, whose size corresponds to the size of the frame.This construction also need to nail small nails.Between the door leaf and the insulation layer of air there, so insulation is not pinched.This facility will be very easy to operate.The door unit when the door is closed rests on a heat insulating material itself, while the heater is bent outwardly and thereby prevent the penetration of cold air into the room.
This arrangement protects the heater door in a bath of frost and frost on both sides, at the same time it remains dry.It is not necessary to make any naboek block because it must be completely smooth and clean.The door to the bath to warm more?In the role of insulation can be used from old fur jackets or upper cloth coat.Such a work activity takes only half an hour, and the effect of it - just amazing.
Now you have learned that there are different ways of warming the door.But this procedure - is very important because it allows to fully enjoy a waiting room and in the bath does not allow to get into the room cold air.Note that the door in the bath must tightly adjoin the box it in any way.