pool in the courtyard of his house - it's not a luxury but a necessity of pleasing, which will save from the heat on a summer day, when the vicinity of the property is not suitable for swimming pond.No luxury is because the installation of prefabricated swimming pools with their own hands will cost is not expensive and is done quite easily.You will need to do a little bit of desire, skills and some tools.
- plus installation of prefabricated swimming pools
- Species prefabricated pools
- best location for mounting the pool
- choice of material for the installation of pools
- welding seams of prefabricated swimming pools
- Preparation of the base for the pool
- structure erected pool
- Installationframe pools and PVC fabric
- Decor pool
plus installation of prefabricated swimming pools pool
Classic frame assembly - is a construction of solid elements, acting as load-bearing wall.The design reinforce a solid film on top, bumpers, and
- Self installation of prefabricated swimming pools - a cost-effective process, compared with the installation of the capital structure.To mount the capital structure will need training excavation, concrete supports tide, fill the pit with concrete, and other jobs that require the presence of heavy construction equipment and the skills of working with it.The erection of a collapsible frame construction complete without it.The assembly process and operation is simple and it does not require the involvement of hired workers and the use of expensive materials.
- in the national team pool is very easy to carry out the change of water for it to tap the bottom attach a flexible hose and poured the entire contents of the pool.Draining is carried out in a sewer drain or used for watering flower beds and vegetable garden, which is also very profitable economically.
- Rigid pool easily fit into any landscape.Qualitative performance of the construction is not necessary to dismantle the period of winter frosts.Even if some remains in the pool of water, and freeze it, it does not harm the container.Other types of pools for private homes do not have such a feature.
- If you need to move the design to a different location, then this process will not create problems.Pool consists of a film and the frame, they can be easily disassembled, packed in boxes and moved.
Species prefabricated pools
basis precast pool frame appears, this implies, and his second name - Skeleton pool.The frame is mounted rod or sheet.Steel structure is the most robust, as is welded from sheet metal monolith.Rod collected from the same frame of metal rods, which are mounted on top of the hoop.With this structure, the brunt of the water takes on a film coating, because this design is losing strength and durability of sheet pools.Bowl itself, irrespective of the carcass type, assembled from polyvinyl chloride material.
Another division of prefabricated pools passes seasonal - seasonal or frost.The common between these two types of structures is only equipment of the stairs, in the rest of the installation varies.Seasonal pools collected in the spring at the start of the bathing season and harvested in the fall in the vault.Mounting and dismounting of time it takes a few days.Seasonal pools are also equipped with a filtration system in the form of a cartridge, the two nozzles for the discharge and water intake, and hoses.
design of prefabricated swimming pools frost is characterized by the presence of enhanced border, equipped with a sand filtration system.Such a system is installed in fixed capital pools.It is also equipped with this type of pool skimmer, hose and nozzle return water.The design is a seasonal swimming pool equipment is not provided.An advantage of cold-resistant construction season - an opportunity to decorate them to your liking, organically fitting into the landscape of territory.The drawback - the need to thoroughly clean the debris from the pool at the beginning of each season.
best location for mounting the pool
first step in the construction of prefabricated pools - choice of location for its installation.Especially important is this aspect when installing all-weather design, which is not planned to dismantle for several years.Pool of the frame can be easily installed anywhere, regardless of its topography, this is another advantage of this design.The only caveat, which should consider - the proximity of the pool to the communications for the convenience of changing its water.
If adjoining land has a large area and allows you to set a large swimming pool, you should think before you install - whether to mount an impressive design size.Large volume will create additional problems associated with cleaning the bottom and change the water.This design loses in strength, compared with pools medium and small size.
local area is not limited to the ability to install.Prefabricated swimming pools set in the room, permitting an area or a wall built around the pool to protect it from falling debris and rain water.
When the installation site pool is determined by a mark out his measuring tape, pegs and string.Allocated for the pool site is cleaned of rocks, vegetation and debris.Tarmac or dig a pit is not required.
choice of material for the installation of pools
for prefabricated pool best fit awning fabric, which is used for truck bodies, manufacturing inflatable boats and equipment sheds.This material is durable, not subject to deformation and is moisture.The density and coloring awning fabric in a wide range.
best to choose a gray fabric with a density of 650 g / m2.If the parties are not the same fabric smoothness and a more equal, it is necessary to place the basis for a glossy finish inside.
used for the construction of the frame beams of pine or edging board.Beam section 1 takes 0.5 cm thick board of 25 mm.Wood for the pool use only dry cured permitted only as a last resort.
welding seams of prefabricated swimming pools
- size of a standard canvas awning fabric - 4.5 to 2 m, for the manufacture of the pool because it is required to seal.This is done using hot air welding or glue.Welding - a more reliable and safe option, since the adhesive bond has a low margin of safety, and the probability of selection into the pool of toxic substances is very high.
- for hot air welding required building dryer with a temperature range from 20 to 700 ° C and crevice nozzle.Cook the fabric on a flat clean surface.It is convenient to perform cutting and fastening work on sheets of particleboard or fiberboard.
- welding temperature is adjusted for the type of fabric purchased.This information is provided by its manufacturer.The cloth spread on each other edges overlap at least 20-30 mm.Hair dryer to warm the tissue able to easily melt, we must not allow it burning.When the material is softened to the desired consistency, his tightly pressed prokatochnym roller with a hard roller made of rubber or silicone.
- The quality of the weld depends on the service life of the structure and its strength, the quality of the resulting weld monitor very carefully.If you want to spend a few stitches on the training of small scraps of tent fabric.
- When paintings are welded to each other, their edges are folded by 50-70 mm on the upper perimeter and boil, to get a side.Then assembled therethrough rings of metal, they are needed for tightening and fixing the entire structure by means of ropes and wires.These rings in the design of the pool called eyelets.This part consists of two parts, which are mounted every 50 cm using a hand press or special flaring.Threaded eyelets in the hole with the appropriate diameter.
Preparation of the base for the pool
- for site preparation prefabricated swimming pools for private homes or cottages, as mentioned above, does not require complex preparations using construction equipment.
- All that is necessary - to remove the top layer of soil, remove all plants with roots, remove bumps and rocks.
- poured on the soil leveling bed of sand.
- For this set CD-profile with beacons on the level, and then leveled the sand until the surface is perfect.
- After installing the frame sand leveled again.
structure erected pool
- timber frame before installation process - purified from the bark of an antiseptic and disinfected.Next, mark out the corners of the future structure and validate the form framework, it should be flat and rectangular.Checks the equality of all diagonals, held their correction if necessary.
- After checking the equality of all lines, with the help of a shovel or drill a well prepared in every corner, their depth is approximately 500 mm.Install two columns on the long side, spans between them leave about 1.4 m. On the short side is set at one intermediate rack.
Installation frame pools and PVC fabric
- Mounting frame begins with the installation of pillars.In this process, be sure to use the power cord and building level.Further, in the well set rack, strengthening them with gravel or small stones.All the space to be filled.Well tamped backfill.In the ground of the timber treated with waterproofing from bitumen, is particularly well covered it ends.
- Established and well-fixed beams tied board.The material is put on top and strictly on the horizon.Mounting height is about 1 meter.Lower the frame tied shalevkoy, average height - 20-40 cm from the ground.Installation is carried out in black screws length of 45-50 mm.
- particularly well mounted intermediate racks, as they will bear the main burden.From the beam cross section of 50 to 50 mm form a triangle from the top of the pillars.This will stabilize the structure and give it strength.Tie rack is cut, leaving the other issues for mounting structures - shelters, staircases, canopy.
- If you plan to equip the pool ladder, its installation is performed on the stage of the carcass.First, install additional rack 60 cm from the corner.From edging boards made two string, they are fixed to the supporting platform below.At the top of the board is screwed to the posts and carry out support on the upper harness.Mark up the stairs and on the boards mounted on the label bearing bars.The steps are best done from a wide shalevki.In total there will be 4 stages, the top is attached to the base of the stairs to the upper trim basin to form a platform at the top of the pool.
- When the pool frame is ready, its adhesive qualities previously prepared a cloth awning.To start podsypku leveled sand, then the level of bolted bumpers.Fix them with screws pressshayboy length - 35 mm.In addition, use large washers with a larger diameter than the hole in the grommet.Canvas and pull tightly pressed screws.
pool to make the pool collapsible presentable and make it look like a design in sports clubs or hotels, it spread from the inside with a special film.These products are sold in two versions - PVC and butyl rubber.The second is considered to be more durable and long lasting, it endures temperature extremes, it is easily cut and glued.Ideal for large-area structures.
For decorative pool a film it is spread on to sides and bottom and press down on top of heavy objects, so as not blown draft.Each new sheet is placed on the previous lap.When the entire surface of the pool Shots sheets, they are fastened together by cold welding.