pool In order to remain safe and comfortable place for the whole family, it is necessary to monitor both the purity of the construction and water quality.
integral part of the care of the pool - the use of special products for cleaning and disinfection.The range of chemicals for swimmi
- The need for chemicals for swimming pools
- main stages of water cleaning
- assortment of chemicals for swimming pools: the principle of action and the form of
- means for adjusting the pH of the water disinfection
- prevention of the growth of algae (algicides)
- means to eliminate turbidity
- special means
- Review of the leading manufacturers of chemical products for swimming pools
- Tips for use of the reagents for the purification of water in the pool
The need for chemicals for swimming pools
create a complete environment for a swim in the pool can beonly if all the rules on the status of water.
pool - the perfect breeding ground for algae and bacteria, and if time does not interfere with these processes, the water will start to bloom, will acquire an unpleasant odor, and as a consequence, become dangerous to human health.
Clear Pool with just one filter, or frequent changes of water impossible, because the filters do not retain microorganisms and bacteria and fungi will continue to evolve.Therefore, it is necessary to use a more effective way - to use special products for cleaning the pool and water.
Properly reagents used for the pool are not harmful to human health, while, disregard for water chemistry can cause the development of many infectious diseases
chemicals for swimming pools performs the following tasks:
- destruction and prevention of fungiviruses and bacteria;
- stabilization of pH of water;
- clarification of turbid water;
- fighting algae and prevent their occurrence.
care products bowl basin and water presented a very broad range, produced by different manufacturers and are multi-functional, or a focused action.
To keep the pool clean, you must pick up and regularly use a set of chemicals that will not spoil the "water" and the construction will ensure a healthy swimming.
main stages of water cleaning
whole process of cleaning the pool water with chemicals can be divided into several main stages:
- Determination of acid-alkaline balance of water (pH).The optimum pH for pool water should be 7.0-7.4.Control measurement can be performed using a special tester.This should be done 1-2 times a week in the indoor pool, and after each rainfall - in the outdoor pool.
- pH adjustment, by means RN-Plus-Minus or pH.
- water disinfection.Preventive disinfection should be performed once a week, the shock - if necessary, the massive destruction of flora, such as the initial filling of the pool.
- Correction of water is needed, if the water is muddy after disinfection, there are algae and other contaminants.With poor water quality correction can be carried out simultaneously with the disinfection.
- control the pH level.After the cleaning of the pool is necessary to re-check the acid-alkaline balance of water.
assortment of chemicals for swimming pools: the principle of action and the form of
Depending on the purpose of all the chemicals for water treatment in the basin are divided into groups.
means for adjusting pH
optimum pH levels in the water ensure efficient use of chemicals and comfortable environment for swimmers (no irritation of the skin and eyes).In addition, it prevents the formation of lime deposits and corrosion of the pool.
Adjustment of acid-base balance of water is carried out on the test results.
water with blue tint has a low pH and with a greenish color - high pH
In practice, most often, it is necessary to lower the pH level in time to prevent the occurrence of turbidity.For this purpose, means RN-minus.
before complete purification of water pH levels need to be reduced to 6,8-7
Much less a need to increase the pH with pH-plus.
Both reagents are produced in dry (tablets) and liquid form, have different packaging of.Their application depends on the composition of the substance, which may be different in different manufacturing companies.
Disinfection of water Disinfection
pool water held in two directions:
- starting treatment (shock chlorine);
- preventive treatment (long acting chlorine).
for primary processing chemicals used for pool tablets (20 g) or granules provides intensive water treatment.
based drugs shock chlorine - organic chlorine, which is soluble in water, creates an increased "shock" the concentration of active chlorine.This dose is able to land all the sediment contamination of the water.
Preparation consumption rate "shock chlorine", as well as the price, may vary significantly, depending on the manufacturer's chemistry for swimming pools.Buy Chinese tablets may be at a low price, but the costs are much higher than similar products of German brand, and efficiency - lower.Normally, the low price of the goods may indicate that the organic chlorine bleach replaced.
Shock treatment, on average, held 1 time per month
need to use "shock chlorine" often caused by several factors:
- increased water temperature;
- frequency of use of the pool;
- rain, wind, bringing algae spores and dirt;
- bad water filtration;
- low culture to the swimming pool.
The level of chlorine in the water can be determined by the tester.
To maintain the purity of the pool at the right level in between "shock treatment" is necessary to use chlorine for long periods.It provides a "sanitary" (0.5-1 mg / l) concentration of chlorine in the water.Such organic chlorine content is not capable of oxidizing, free from dirt, but it is enough to prevent the propagation of viruses and bacteria.
to disinfect water can be used, and chlorine-free products.These include:
- Funds on the basis of active oxygen or bromine (available in liquid and dry form).
- means biguanide.
Prevention algae (algicides)
in the outdoor pool chlorine can not always be 100% cope with algae.Therefore, it is necessary to additionally use special means for the destruction of aquatic vegetation, namely drugs from the group of algaecides.Such chemicals penetrate inside spores and algae are killed completely.
algaecides for swimming pools, the market represented a lot and, although on many "flashy" name like "Better Formula" and the like, they have almost the same composition.The difference between the drugs may be a concentration, minor additives and foaming ability or not.When selecting chemicals for swimming pools consumer reviews can play a decisive role.
At the first sign of the growth of algae (green slurry in water, green patina on the walls) is necessary to apply a shock dose of algaecide and prevention - regular duty in the water dose.Dosage is determined in accordance with the instruction, and depends on the concentration of the active substance and release forms of the manufacturer.
means for removing turbidity
When the turbidity in the pool (organic and mineral particles), which filtration system can not cope, it is necessary to use coagulants (flocculants).
coagulants should be used only when needed and not on a regular basis, otherwise the filter will begin to become clogged over time
Alternatively, you can use a reduced dose of flocculant and feed it into the pool through an automatic dispensing station.For a dosage suitable liquid flocculant tablet is better to apply with considerable cloudiness.
There are additional chemicals that are used in the care of pool:
- drugs increasing / reducing the water hardness;
- chemicals for cleaning swimming pools;
- to clean the equipment;
- preparations for the winter pool (used in the preservation of the pool for the winter);
- cleaners shelters for swimming pools;
- cleaners filtered tank;
- drugs that remove metals from water;
- means for removing oily film on the surface of the water and the walls of the pool.
Overview leading manufacturers of chemical products for swimming pools
among domestic and foreign manufacturers of care products for swimming pools, you can select the most popular companies that are well established in the market of chemicals for swimming pools open and closed.These include: Bayrol, HTH, CTX, Aquatics, Akvadoktor, Markopoulo.
German company Bayrol produces a whole range of means to care for the pool, which can be used in manual or automatic disinfection.All chemicals for swimming pools Bayrol passed examination and has corresponding certificates of quality.
Besides funds for water purification, Bayrol offers a wide range of efficient agents for cleaning of the pool:
- hardness stabilizer, prevents the formation of lime deposits (resistant to chlorine, does not contain phosphates);
- preparation for cleaning waterline (alkaline, in liquid or gel form);
- cleaner filters (in powder form).
Bayrol lets testers and indicator strips for determining pH, chlorine and bromine.
Chemicals for swimming pools NTN has dozens of items.
In addition to standard tools for the care of pool company specializes in the production of the following drugs:
- Preparations for disinfection by chlorine, do not contain cyanuric acid.Unstabilized chlorine deprived of noxious fumes, and water treated them more resistant to external factors.
- care products SPA-pools.
Among the assortment of chemicals for swimming pools CTX most often used such means:
- PH-minus / pH-plus in granular form;
- Antinakipin- CTX-600 prevents the formation of lime deposits on the walls and bottom of the pool;
- CTX-41 Liquid flocculant - is not affected by low temperatures, but its effectiveness is not dependent on the pH of the water;
- CTX-75 - a preparation for degreasing pool walls, prevents foam.
With Chemistry for pool Aquatics can spend a full cycle of cleaning the pool, picking up a set of products:
- pH adjusters plus / minus Aquatics;
- disinfectant with active chlorine;
- Aquatics coagulant (aluminum sulphate solution);
- algaecide Aquatics (compatible with auxiliary agents, but not suitable for use in swimming pools for medical purposes).
Akvadoktor company also provides a full range of chemicals for swimming pools.The price of production is on the same level as the cost of similar products company Bayrol.There are separate programs for clean water means on the basis of active oxygen or bromine.The range of companies have Akvadoktor chemistry for inflatable pools.
Popular domestic brands, produces equipment and accessories for swimming pools, the company refers Markopoulo .Chemicals for swimming pools is available from this manufacturer cost and high efficiency.
Markopoulo produces highly specialized and multi-function devices for measuring water parameters: testers kviktestery, photometers and tablets.
Tips for use of the reagents for the purification of water in the pool
When using chemicals for pools is necessary to consider some recommendations to improve the efficiency of the reactants and to protect people from exposure to harmful chemicals.
- All chemicals should be used strictly according to the instructions and dosage.
- When selecting reagents for water treatment is necessary to know the volume of the pool.
- Reagents desirable to add to the water through the skimmer or a special float.
- After applying chemicals to swim in the pool will be two hours.Chlorine-free disinfectants
- are more expensive than conventional chemicals for swimming pools, but they are safe and do not cause allergic reactions.
- for shock disinfection means better use of chlorine.
- alternative to the standard set of chemicals for swimming pools Intex can be hlorgeniratora installation.
- pool shock treatment is desirable to perform at night.
- tablets or dry drug should not be thrown directly into the pool, they should definitely be dissolved in a little water.
As you can see, there are a variety of drugs in order to maintain the pool clean.Some of them are required to use, and some - not used for any indication.The main thing - to properly assess the condition of the water and find the optimal set of chemicals for the pool.