in each summer cottage has a shower, but without it there is almost not enough.After working in the garden or at home, everyone will want to freshen up.And then comes to help economical and easily constituted by the outside shower heated.The main advantage of the variety the soul, acts that it is used in the cold and in the warm season, as opposed to an ordinary summer shower.Recommendations for the construction of shower heated consider their own hands on.
- Features manufacturing combined shower garden with heated
- Suburban heated shower: User manufacturing
- Shower to give heating: additional recommendations
- Features construction of the heating system, the floor and the installation of the water tank
- Recommendationsat the choice of the soul heated
Features manufacturing combined shower garden with heated
offer acquainted with the recommendations that will help to build a summer cottage on the combined heated shower.The main
Construction soul with his own hands - not a difficult process, if you carefully to understand.The main advantages of the availability of showers in favor of everything, because of the minimum number of components, and if the right to decorate the shower, it will be a real highlight of the suburban area.
process of bathing in the shower after hard work, a positive effect on human health, relieves fatigue, relieves stress and relaxes.The variant of buying a ready soul, but his independent production will cost much cheaper.
choosing the place where will be located a shower, one should proceed from the fact that the summer water should be well warmed up, so not recommended to have a shower cubicle in the shade, as the water tank should be kept under direct sunlight.
best option for the location of the soul - the open area of the garden.However, it should be noted that to the shower needs to be electricity, which will provide water heating, with a heating element.The structure of the soul enters the garden:
- tank heated;
- vlagouystoychivy material;
For the construction of the soul of this type, by location, you must install the rack, and see to it that the design was sound and stable.The upper part of the tank is installed shower dark color.Since it will pull it to heat while water will be heated by the sun.At the bottom of the tank is installed hose faucet and watering.Install a rubber mat on the floor, make bathing more comfortable, and they cover the rack using the damp-proof material such as films or shower curtains.This shower is perfect for swimming in the summer or spring seasons.
Another way the soul acts of its location extension to one of the walls of the villa.One should pay attention to the choice of the wall to which it is adjacent, as the sun's rays should fall in a straight line to the tank.
In this case, the tank is connected to the wall, and clings to it, the frame is installed, the hoses and watering valve, electricity is supplied.To protect the walls from moisture it is necessary to make water resistant.To do this, overlaid it with tiles or fix film.But keep in mind that water will be warmed in a bad heart, so often need to use the display as a shadow from home does not provide good access to the sun.
Suburban heated shower: User manufacturing
invited to consider options polycarbonate summer shower facilities are heated.Before proceeding to the study of instructions for its manufacture, a look at the main advantages of this equipment soul:
- using this as a summer shower, polycarbonate is very well heated, so the summer is almost no heating elements are utilized;
- cabinet retains heat for a long time;
- polycarbonate is resistant to mold, so this surface is antiseptic;
- material is durable and has a long service life;
- easy installation and removal;
- variety of colors allows you to choose polycarbonate in accordance with the desire of the buyer.
In the construction of a summer shower with heated, it is necessary to plan its location and do the project.
place, which will be installed shower must first align.The water should drain by bias, so this aspect also requires organization.Surface runoff is to be laid using vodouystoychivogo material, such as concrete, roofing material, or waterproofing film.To prevent odors and ventilation, should be put on top of the drain special net.If the shower will use more than three people, it is recommended to construct the drain hole, which will drain the water.The recommended pit depth of two to three meters, and the distance from the pit to the soul of at least three meters.At the bottom of the well placed sand or gravel.For walls, use old tires or plastic sewer barrel.The drain hole must always be closed, for example, wooden planks, for safety of animals or young children.
When the preliminary work has been completed, proceed to the construction of the frame structure.It is recommended to use an aluminum profile that helps to give the desired shape of the soul.Use sheets of polycarbonate from eight to sixteen millimeters.On the roof is placed a water tank, and for the operation of the soul in the cold season, you need to install a tank with heating or water boiler.
tanks for summer heated shower are different.In relation to the form they are divided into:
Depending of the material from which the tank is made, they are:
Among steel water tanks isolated:
- stainless steel tanks;
- of galvanized steel;
- of ordinary metal.
choosing tank volume, should be guided by how many people are bathing in the shower.The average recommended amount for a family of four - 100 liters.It is better to choose tanks dark color, since they have higher thermal insulation properties.Tanks with heating equipped with special valves and heating elements are connected to electricity.Therefore they do not need training, after buying them safely mounted on the roof of the soul.
To make the heating efficiency even more, on top of the tank to install a polycarbonate roof, which creates a greenhouse effect, and will retain heat water.
Another essential component of each tank acts as the device, indicating the amount of water in the tank.As the heating elements are very sensitive to water-free environment and the shortage of water burn, this parameter must be constantly adjusted.
For equipment floor in a shower drain pipe should be installed and make a small threshold that separates the shower from the part of the locker room in which to store things, towels and soap means.On the floor set the tray, and then a rubber mat.
door, you must make a polycarbonate, for this pre-construct its frame, which is attached to the loop.After installing polycarbonate handle attached to it.With waterproof curtain of bath, separate washing and dressing department.
To make the shower more beautiful and attractive, the site was located near the recommended decorate using beautiful colors, shapes or decorative mosaics.
Shower to give heating: additional recommendations
1. Choosing a location for the soul, be careful that there is no strong drafts that will lead to the possibility of sick man enjoying a shower.
2. The amount of the drain hole must be greater than the water tank in two and a half times.
3. Do not place the drainage and septic material directly under the shower, they must be installed close to it.This procedure will reduce the risk of unpleasant odors.
4. As for the drain cover is recommended to use:
- roll waterproofing materials;
- ruberoidnyj materials;
- trough reinforced with a metal mesh;
5. Do not use in the construction of impermeable clay layer, as a consequence of its erosion, it will score the drainage system.
6. To improve water drainage, install a shower stall on an elevated plot, if available.
7. Recommended height shower is between two and a half to three meters.This design provides comfort and free space while bathing.
8. The minimum size of the booth of one square meter, but this will require additional space for locker rooms.
9. In practice, the most convenient size of a summer shower with heated booth stands 190 cm in length and a width of 160 cm.
10. Keep track of the basis frame strength shower, as set top tank filled with water.It should be durable and withstand heavy loads.
11. To make upholstery outer shower, you need to have one of the materials:
- slate sheets;
- moisture-resistant plywood.
12. It is desirable that the material lining harmoniously fit into the exterior of the entire site.The variant of his painting or drawing decorative designs that will make showers not only a place for bathing, but also decorative element garden.
13. Follow the density of closing the door, because the shower is not allowed cold drafts.
14. Since the shower door is under constant exposure to moisture, it is recommended to install it special sealing mechanisms, saving heat indoors.
15. To use the shower in the winter, you want to resort to its insulation.To do this, you can use any insulation in the form of mineral wool, foam or polystyrene.To fix the heater using a film stacked on top of him and secured with staples.Features
construction of the heating system, the floor and the installation of the water tank
The location of the water tank - the supporting pillars that are above the shower.In order to save, possible option of buying ordinary barrels a hundred or two hundred liters, and independent of its care for the soul.Before installing the tank should do it for the removal of the thread, which will be mounted ball valve with a watering can.
to Gulf waters there are three ways:
- manual - involves pouring buckets of water;
- the pump - connection to the circulation pump;
- the water - connection to the water supply system, if any.
for Water supply facilities use plastic pipes.Adjust the water flow is carried out with the help of a crane or water pressure.Better to worry about installing plumbing valve that will adjust the amount of water in the tank.
to install the floor in a summer shower in a heated recommended to make a concrete floor.Next, a wooden pallet, which is convenient to stand barefoot.The variant of the installation of a wooden floor without screed, but in this case, there will be a small draft, cause discomfort when bathing in the winter.
Another way arrangement soul - installation of sanitary purchased pan that has a siphon hose to drain.This arrangement impervious layer at the bottom of the soul is not required.
popular error in the regeneration of a summer shower with heated advocates setting loose doors and thick walls that do not leak air.Poor ventilation promotes mold and mildew from the fact that the walls of virtually dry.
summer, when the water is heated by solar radiation, problems arise when bathing.But the country, sometimes have to come in the autumn, spring and even in winter.In this case, in the summer shower is too cold to swim.For these purposes, it is recommended to arrange a heating system, which will provide hot water shower.
Consider the case of heating buildings using a blowtorch:
1. Only use tubes that made of metal.Pipe which delivers water to the tank roof is retracted from the shower stall for several meters.Outside the room set shelf with heat exchanger and water heater.In the absence of a shelf, use the variant table.
2. For the manufacture of heat exchanger coils should be made of a thin pipe, pre-twisted spiral.If warm water is required, then only three layers of the winding tube, if necessary in hot water, will require about eight windings.
3. Insert the housing in a prefabricated coil.For its production is fine large saucepan or a bottomless bucket.Fix the coil in the housing by welding.
4. The end of the coil is connected to a metal pipe that brings water to the soul.It is better to do threaded mount which can be easily removed in winter.
Another important aspect in the construction of a summer shower with heated favor of his aesthetic and attractive appearance.In addition, a major role is played correctly selected materials and finishes.Indoors, it is recommended to use a damp-proof nature of the materials that will not break down over time.To improve soil drainage, it is recommended to plant next to the shower moisture resistant plants, so will avoid waterlogging the soil.
Recommendations for choosing a shower heated
Before you buy a shower with heated, should examine the requirements that are presented to him:
- economy - reasonable price that justifies the quality;
- ecology - heated showers must be made of materials harmless to human health;
- Fire safety - another requirement as a heated shower is connected to electricity, all the contacts and connections must be carried out efficiently and in accordance with fire regulations;
- comfort - being in the shower should be enjoyable and size, comfortable for swimming;
- modernity - a requirement to design purchased, it must be in harmony with the overall exterior.
When selecting a model to guide the soul of purchased volume tank shape, which are selected on the basis of individual preferences.There are models with or without cabins.Installation of additional options such as automatic heating and draining, additional tips and hygiene devices.There
pedal options or shower with separate dressing rooms, they differ in cost, the latest models are more expensive, but much easier to use.
Another requirement per heating serves ease of installation as well as a shower of purchase, at the time of its installation or connection is given a maximum three hours.
Shower should have a window or mesh elements will come through which light and air, killing the fungus and mold.
Additional features purchased a summer shower with heated acts:
- indicator, which is responsible for the filling level of the water tank;
- heating devices or timers off;
- device or drain the water of the Gulf;