fence - this is not only a way to limit their space, so it's important to give it a decent look.Begin to take care of a wooden fence is necessary from the outset - that is, when it is installed.Places where you will install the fence, usually purified from plants and ant hills to protect the structure from fast settling insects.Also, these sections can be filled with gravel color.And the most important thing you need to do is to paint your fence with a special paint.Let's find out what kind of paint to paint the wooden fence, and how to do it correctly.
- necessity of painting the wooden fence
- preparatory stage painting
- Choosing paint wooden fence
- Manufacturers paint for wood
- procedure painting wooden fence
- application of varnish on the wooden fence
- renewal of an old fencewood
Necessity painting wooden fence
Fences made of natural wood perfectly able to decorate any garden, because the tree - a spectacular stuff.But
One category of owners prefer to paint the structure in order to increase its service life, the other wants to express his nature and his own status, the third wants to turn it into a part of the overall landscape design of the site.And the most important thing at the same time that the painting wooden fence really is the main way to prolong his life.
But remember that it is not necessary to wait until the fence begins to break down, because it will stretch in "unprotected" form no more than 5-10 years.During this time the wood will attack the bugs, beetles, much material can soak up water and swell, losing its original appearance.So you understand the importance of the establishment and periodic update of its protective coating.
If you leave without further processing wooden fence, it will start very quickly change their appearance, and a little later - and did rot, because precipitation are the most serious threat to the tree.In addition to snow, rain and insects, the tree a lot of other enemies.For example, mold, fungus, moss and development.They are also able to bring a wooden board failure in a very short time.That is why it is so important to know how to paint the wooden fence to increase its lifetime.
preparatory stage painting
first thing that you must understand before staining wooden fence - it is necessary to calculate the area under the application of paint and the number of staff that this would require.The next step is to prepare the surface for holding the painting.First is to remove all dust and dirt.Next you need to remove remnants of previous paints, if you have to update the old fence.This can be done by means of special scrapers, which have a rigid foundation.The best way to clean the grinding is considered.
Such a procedure would be useful, and when painting the new fence.Usually the board for the construction of the fence has a rough surface that does not allow to put exactly the same coat of paint over the fence.Therefore, you should pay attention to the creation of a smooth surface of the board, which can be obtained only after a good polishing material sandpaper.
boards grinding procedure is carried out in stages.First you need to clean off all cloth protruding portions all the dirt and oil stains.Then carefully check the board for the presence of various defects and damages.If during the inspection, you will find flaws in it in the form of potholes and cracks, they should be primed and filled.
Thus remember that the primer must comply with the specific requirements of the surface, that is, should be designed for wood.Put it on the board first in order to achieve the best styling putty and paint.Allow the solution to the primer has dried, any unevenness on the board seal the plaster and leave to dry.
then must be treated in a similar way to the board again sanded with emery cloth.Apply a final coat of putty again, and now the wood is considered ready for processing protective structure.Keep in mind that most paints for wooden fences dry for an extended period, and it is recommended to choose the good weather.
composition could well lie in the absence of rain and wind.However, it should be borne in mind that direct sunlight can reduce the rate of drying, and because of this in the future lose their protective properties of the paint.And finally, you need to prepare a tool for applying the paint.Spot painting wooden fence suitable brush.To increase the speed of operation is common to use a roller to create a perfectly smooth layer is better to buy a spray bottle.
If there is a need for the board to paint in places with difficult access - it is recommended to use a telescopic brush, which provides the desired length of the handle.It is better not to use cheap Chinese brushes, losing in the process of painting stubble, which is displayed as a summary for the worse.
Choosing paint wooden fence
When you have gone through all the preparations and prepared the wood for the construction of the fence, you can proceed to the final coloring.But this is still worth finding out, the better to paint the wooden fence to make it look original, aesthetically pleasing and long remained in its original form.
When choosing paint it is important to take into account the color and type of paint, its physical characteristics with respect to resistance to mechanical and environmental factors, the environmental safety of the composition and efficiency, regardless of the treated wood surface.Paint must be resistant to atmospheric effects, the effects of damp and wet environments.
Previously, when painting a wooden surface used exclusively dyes, oil-based.They are not cost-effective and acceptable because with minimal change in the weather and the temperature is lowered such intumescent paint quickly and crack.And had re-cleaned surface to remove ink residues risen again to process wood and paint protection mixtures.Today, the choice of colors for the wooden fence is much broader.
When choosing the best paint wood fence must take into account one important feature that is in contact with the land boards.If rail embedded in the ground, the contact with the ground part must be treated with special paint based on bitumen.This composition allows the surface of the water-repellent properties to acquire and significantly prolong the life of wooden fence as a whole.But already established structure of this technology can not be applied paint.
must now deal with the main part of the fence that is located outdoors.As in the above case, it is desirable to direct the board to paint the fence installation.You will be able to accurately process end surfaces design.If you leave them without protection, then it turned into their weak spot, and got there the moisture will trigger a rapid decay of the fence.Yes, and it is more convenient to paint the wooden planks lying horizontally.
first variety of paints for wood - ukryvochnye compositions.The essence of the coating produced by them is to completely hide the original color and the structural features of certain types of wood.These inks are used for a wooden structure only when wood on its surface is too pronounced flaws.That's when several thick layers of paint they simply hide, but at the same time the tree will lose its natural color.
next type of paint that is suitable for wooden fence and is used most often lessirovochnomu.Its feature is the ability to retain the original texture and shade tree species.Of course, all kinds of paints for wooden fences should be selected, depending on the requirements of the surrounding landscape and landscaping infield.
often painting a wooden fence used acrylic paints.Naturally, acrylic is made impure water, so you should buy is a part of that moisture could not have a detrimental effect on the tree in the painting.That is worth buying a special acrylic paints for wood.If you apply the paint on a wooden fence with a base in the form of solvents, then after a couple of years, there will again be required delamination and painting fences.These processes occur because pure acrylic paint has poor adhesion to wood.
construction Transparent glaze or varnish will be the best solution for those developers who want to preserve the shade of the fence in the natural form.These clear solutions with a special pigment that is present in their composition, are only able to highlight the true color of the wood fence more clearly.
antiseptics are not just paint for wood, this kind of material is characterized by the ability to penetrate the wood structure a few millimeters.In addition, due to its own composition antiseptics excellent protection against blue stain wood fences, rot, mold and exposure to rain.Antiseptic protective coatings are opaque and glazing (translucent).
Manufacturers paint for wood
Let's look at the most common coloring formulations for wooden fences and their basic properties:
- Belinka Toplazur.Drops on the surface of a compact and dense coating containing UV filters, which provide a high level of protection for all types of wood, it gives it a silky gloss.When a two-layer coating per liter at odds of 8-10 square meters, depending on the quality and type of wood, the application method and surface finish.
- HoltsLazur gel.The translucent structure designed for long-lasting protection of wood for at least seven years.Also worth noting is a highly effective UV filter.For sawn timber consumption per liter of gel is 6-8 square meters, for the planed - one liter of 9-11 square meters.
- Pinotex Ultra.The paint penetrates into the material and its composition contains the active substance for protecting wood against blue stain, mold and rot.The substance is especially recommended for painting planed wooden surfaces as capable of forming beautiful, such a lacquer layer.Not suitable for finishing wood, inhabited by pests and fungus infection.Consumption per layer per liter: for planed wood - 12 square meters, for sawing - 8 square meters.
- Tikkurila Valtti Color.The composition has good processability application, able to soak into the wood and form a continuous film that slows the effects of moisture, prevents the formation of blue stain, mold and mildew.Consumption of sawn timber 1 liter of 4-8 square meters, and planed wood for 1 liter for 8-12 square meters.
- Olympus Omicron-Maximum.Translucent thixotropic composition for durable wood protection (at least 5 years) and contains Bioprotective complex and UV filters.Good application for sawn (1 liter per 5-8 square meters), finishing (1 liter per 10-14 square meters) and previously treated wood.
procedure painted wooden fence
Once you have chosen what to paint the wooden fence, prepare high-quality paint for exterior wood finishes, brush size 4 and size 1 (edged or angular), cloth, broom, rubber and workersgloves and warm water.For starters treat all elements of the wooden fence special bactericidal impregnation (antiseptic).
Painting wooden fence better than before, when you'll be set, of course, if you do not upgrade the old fence.Treat beams, boards and even columns.Do not forget the ends of the boards, so you will prevent the rapid decay of the material.When painting it is recommended to move from top to bottom, that is first treated with the upper part of the board, then - the bottom.And so it should be painted every plank.
to paint the bottom of the wooden fence is best to enclose a thin bar at the lower end of the board in such a way to get the paint at the ground and not worry about dirt and grass on the brush.You will be easier to not work on a hot day or in direct sun.
From the standpoint of durability is optimal paint double wooden fence.To do this, you need to create 2 layers.The first layer should be done with a special primer that is alkyd-acrylic composition.The second - a simple paint.If the fence paint in this way, alkyd particles will penetrate deep into the wood pores.Surface layer interacts well with the impregnation.That will have a resistant coating that will last up to 15 years.
application of varnish on a wooden fence
on the market today are a few types of coatings: alkyd, polyurethane, nitrocellulose, dispersion and urethane.For painting wooden fences are mainly used alkyd paints, thanks to its quality indicators.But in the struggle for environmental cleanliness championship we got acrylic paints, made of water-based.Although experts recommend using them only for indoor use.
nitrovarnishes also have good properties, but are very toxic.If you have decided to paint the wooden fence nitrovarnish, then paint the fence in the country only after clothe respirator.Polyurethane coatings are widely used in various fields, they can even cover musical instruments, because they are very strong and not subjected to mechanical damage.
When choosing a nail wooden fences important to be able to choose the right type of paint and paint the fence according to the technology.Better to start before the first frost, because the coating will have time to dry.Apply the varnish on the wooden surface of the fence should be simple small brush made of natural hair.The varnish is applied to one side from the edge of the wooden fence, carefully rubbing the surface.
Rub the composition necessary to obtain a thin layer, so you are more thoroughly impregnated with the first layer of the fence, which quickly dries.When struck the first layer, wait until it dries.For this purpose usually requires close of day.You can then apply another layer of lacquer.Lacquer surface of the fence will make shiny without changing its natural color.
update an old fence of wood
little differently need to do if you have to paint the rugged, but the old and long-unpainted fence.To do this, it made use of all the means that for a new fence.However, the old designs have been painted, and perhaps more than once.Therefore we need a more thorough preparation of the surface.Here you will need and rags, and a broom and a bucket of water.Do not forget the rubber gloves.
Before painting the old fence, you should spend some time to clear it from various debris.It is necessary to remove cobwebs, dust, vegetation (moss), other dirt, especially in the joints and corners.You should also clean the upper part of the wooden fence from bird droppings.Make sure there is no damage on the surface, which are deposited insect as well as termites.If you notice any signs of insects, they need to remove or replace the damaged boards.
Then you need to remove all the old paint.This can be done with a spatula, sandpaper or a wire brush.First shot dilapidated layers, and then - everything else.Remove cover completely all necessary to lay down new paint on the wood without problems.