Every housewife will tell you that there is nothing more convenient for cooking than a gas stove.But along with this, it is considered one of the most dangerous household appliances, because it requires connection to a gas supply.Remember that the installation of a stove should be carried out according to the instructions for its operation and in accordance with the rules of technical safety.For a man who knows how to handle a wrench and not by hearsay knows safety when working with gas, connect the gas stove alone is not a major problem.And we will show you how to do it, in what sequence to perform any act and what to look for.
- Purpose gas stove
- connection plate in the gas sector
- Required Documents
- Connecting a gas stove: step by step instructions
- Location plate
- Selecting a tool and material
- Disabling old plate
- connection Connection plates with dropping
- Connecting electric oven
- Safety Regulations
gas stove stove is an integral part of the kitchen interior.By its type stoves are different: gas, electric, and hybrid (gas-electric).Gas stove favorably with their relatives on speed electric cooking, safety and service time.
main disadvantage in their work are an unexpected leakage of gas and the possibility of fire.However, in the latest versions of gas stoves built gas-control system, which allows you to automatically turn off the gas supply if the burner goes out suddenly.In addition, the boards are equipped with modern automatic ignition eliminates the need for matches or lighters to ignite special burners.
Connecting a gas cooker in the gas sector
stove in appearance may be fairly simple device, and you think that there is nothing complicated about it is connected.However, we must remember that this appliance is connected to the gas supply system is necessary, and in this case it is recommended to act very carefully.Many gas stove connection trusted experts, but knowing how much is the installation of gas stoves, and fees for operating hours contemplating using them.
But if you are not completely confident that you will be able to perform such a difficult job, it is better to entrust it to the master.Specialists will install the stove in accordance with certain requirements and standards for the installation of gas cookers.To do this by contacting the gas supply at the place of your residence and agreement on the date of connection.
In addition, you will be pleased with the price of installation of a stove when it will make a representative of the local gas supplier.The only disadvantage in this case - this time the connection.Representatives of the gas supply may tighten this thing up to a week, they appoint themselves the date of connection, can make to wait half a day.
So if you have chosen a similar path, be prepared for it.But the warranty card and all documents will be processed correctly.And if you do not like these terms (waiting too long) and the cost of installation of a stove, in your opinion, is too high?Then get to work on their own.
necessary documents first thing you should do when you install the gas stove - it is carefully unpack it and check the product for mechanical damage.Below is a list of documents that are needed to open the account and signing contractual documents for the supply of gas.To install and connect the gas stove at home will need this documentation:
- passport owner of the premises;
- certificate of state registration;
- FAQ about the composition of your family;
- Treaty donation or purchase and sale of a house or apartment;
- subscription book;
- passport at the counter;
- paid receipt;
- Maintenance contract;
- Datasheet home.
Service gorgaza after checking the documentation before the customer service gives him the following documents:
- Forms to sign the agreement supply house or apartment with gas.
- the Subscription book gas supply, which shall contain information about the service organization, address and nameparty, rules for the use of gas appliances, the mark on the instruction of family members, type and name of the equipment, the work plan and the signature of both parties.
- contract for the supply of gas for domestic needs with an indication of the characteristics of the gas equipment, specifications, and installation of a stove gas consumption in the month certain combinations of gas appliance, order checks, determining the amount of payment and the amount of fuel consumption, as well as the form and terms of payment for gas.
Connecting a gas stove: step by step instructions
If you decide to act on their own, then please note that the warranty on the new plate will not begin with the installation, and the date of purchase of equipment in the store.Therefore, it is strongly recommended to take all measures to plate somewhere in the garage did not wait six months, and has been installed and connected directly after purchase.
plate must be removed from packaging boards and attach the adjustable feet, put it on pre-arranged location.Between the slab and the wall must be a gap of no less than indicated in the instructions for installing a gas stove.
The plate should be set horizontally by using a spirit level.The level should be placed along one side of the plate and by twisting the adjustable feet to achieve a level position.Then, the same operation should be done with the other side plate.Stove must be set firmly horizontally and be steady on all four legs.Only under this requirement, the quality of her cooked dishes will be canceled.
If the optional foot plate are not included, for its smooth stable position is necessary to use spacers, for example, pieces of pressure-treated wood.And using them to adjust the horizontal position of the stable plate.
Selecting a tool and material
to install a gas stove with his hands need to have on hand tool: number 1 pipe wrench, adjustable, do not interfere, and open-end (22 × 24).I need a screwdriver.Typically, the gasket 1/2 supplied with the hob or gas cooker.Prepare a brush or a shaving brush and soapy water to check the quality of work.To connect the plates need gas hose if the old has worn or missing, and the ball valve.
to seal the rubber hose to the pipe seal is needed.Recommended thread Loctite 55, which serves for instant sealing pipe joints.You can also use tape Fum, but the seal of flax is not recommended, as it has the worst compared with Loctite and ribbon Foum characteristics.
Disabling old plate
First you need to turn off the old gas stove, this is covered in the standpipe valve.Make sure the tap is closed, turning the burners.If you have an old petal valve, it should be replaced by a ball.It's simple design, highly reliable in operation and relatively inexpensive.
With the new ball valve, remove the handle, will not interfere with the screwing it to the standpipe.It is necessary to keep on hand thread sealing tape or Foum soaked piece of cloth that he could close the hole in the standpipe after removing the old faucet.All the preparatory work done.
Now twist the old faucet, pipe plug with a wet cloth (do not forget to open the window!).Clean the threads on the standpipe after the crane and screwed namatayte thread Loctite (Foum tape).Rag remove (gas escapes, but you open the window!), And quietly but quickly to the screw thread with a new valve gasket.
density connection with the crane and lowering the rate of installation of a stove, check lather, bubbles if the connection, you need to unscrew the tap (not fully) to check the density of winding gasket.If no bubbles, it means that work you spent efficiently.Now you need to put the faucet handle screwed into place.There is one caveat, if you just are not going to connect the plate, mounted on the crane should be put on the cap.
hoses to connect
Consider the case of independent installation of a stove and gas connection pipe with a flexible rubber hose.This connection option is by far the best.Stove not rigidly attached to one place, the flexible hose allows to move it in the range 1-5 meters, and fixed in the place where you prefer.
Besides, such a connection is more secure.If you accidentally move the plate, flexible hose will serve as a shock absorber, and no long-term consequences associated with unexpected gas leak, do not happen.It should also be aware that such a connection is durable, because modern rubber hoses are designed for long life (over 10 years).
Rubber hoses are available in lengths up to 5 meters, must be purchased in white metal braid with yellow markings (red and blue hoses to the water!).Although you can often hear that a good black rubber hose of our production.
Their choice is wide, they are easy to connect.Buy hose should only be certified, so it's best to shop.Be sure to pay attention to match the output on the stove.And the output is straight or angular (bent downwards).If the output is a straight line, then you need to look for a hose that was with a square.Also, do not forget the thread.It is 1/2 "or if the thread 3/8", then you need to buy an adapter for 1/2 ", although it is usually bundled with a gas stove.
It should be noted that according to regulations, the rules governing the installation of gas cookers and gas treatment, it is recommended to install bellows hoses - a metal hose, which are stretched in length and have a special protective cover.They are the most reliable but also the most expensive.
Connection plates with dropping
usually a gas pipe (riser) is held in a corner of the kitchen from the ground floor to the top.By the riser pipe is welded to the valve, it is called dropping.Here are dropping and this is connected a gas cooker.It can be rigidly connected by a steel sleeve.This connection can only be seen in old houses with plates still Soviet issue.This option is a complicated connection, now is an anachronism, so it will not be considered.Only note that in this case, better yet call the master.
plate installed, the requirements for the installation of gas stoves are made, now we need it by a flexible hose connected to the gas pipe (standpipe).For this purpose, the hose connection seal namatayte Loctite or tape Fum, then screw the nozzle into the ball valve on the standpipe.We must now do you connect the second end of the hose to the gas stove.
set special pad with a metal grid (it must be complete with a gas stove) in the so-called output plate in place of the flexible hose, and cooker.This gasket protects the plate from dirt and prolongs its life span.
If the thread on the outlet plate (where the hose must be connected) 3/8, insert the pre-wound on his seal and screw it to the second end of the flexible hose.If the thread on the outlet plate 1/2, namatayte to seal and screw it directly to the outlet hose.Place connections tighten with two open-end wrench.To turn off gas valve may need, you can choose from a specialty store.
for connecting plates in the country, where we have to use liquefied gas in cylinders, it is necessary to change the nozzle in the burner.Large nozzle should be replaced by a smaller nozzle diameter.This is to ensure that the burner is not smoked and dirty dishes.
Connecting electric oven
you did install a gas stove yourself, stove connected.Now open the ball valve on the standpipe and lather check the reliability of the connection.If the hose junction with access to the gas stove is no bubble, there is no gas leak.The connection is made qualitatively, cooker ready.
If you bought a gas stove with an oven, it is necessary to think about summarizing electricity.To do this, the socket with grounding of the shield and run a separate power line.Accepted used PVA cable 3 × 1.5.
must be installed in the electrical circuit breaker 16A.Never use household outlet because the cable cross-section plate standard wall outlet does not match the current system and wiring are not always able to withstand high power consumption stove.In addition, improper electrical connection to the gas stove can cause dangerous consequences for human life.
And finally, pay attention to the safety instructions and useful tips on installing and connecting the gas stove.When you connect, you must comply with all requirements relating to the cubic capacity of the room.
flexible rubber hose must be seen, in any case it should not be anything close.Gas and hose must be readily accessible for visual inspection.Do not hide the hoses for non-removable false panels and drywall to check if you can show them.Use a neat box.They now make a great many of any color.
Also, do not make connections more than is necessary under the operational conditions of the gas stove.Watch a video about how to install gas stove: There should be only those that are needed, nothing more!It is not necessary to paint the hose, because the paint is able to spoil it, and it cracked over time.To give a more aesthetic appearance you can use adhesive paper or oilcloth.
rubber hose must be directly connected with just a tap on the standpipe, and the other end - only with the release of a gas stove (may be an adapter).If they come to check the stove gasman and discover unstated rules of operation of the connection, there will be trouble.Plates can detach and be fined for violating the rules of operation of gas appliances.
Remember, if you have connected a gas stove, no gas leaks are not violating any requirements, she will be happy for a long time to work.If all the work associated with the installation of a stove, made in compliance with all rules and conditions which require work with the gas from the gas industry will not be any complaints.And the process of cooking will bring you lots of positive emotions!