Residents of small towns or villages know very well what in their life role any woodworking equipment, which is likely to have a lot to use in their work.In our time, the construction market is full of a lot of different models of woodworking equipment, and the most popular are the sawmill.All sawmills are divided into frame, disk and tape that are different views of a cutting tool.Bus sawmill is completely different from them own device.
- Purpose tire sawmill
- tire design sawmill
- operating principle of the bus sawmill
- Manufacturing bus sawmill
- improvised sawmill
Purpose tire sawmill
man long used the wood of different breeds tomanufacture of articles that are needed for the life of him.During this time, people were working on the modernization of woodworking equipment.Hand saws that have been used before, almost gone.They had to be replaced by more modern and convenient tools, which include a chainsaw, Gang and trimmin
Any construction or maintenance of buildings is accompanied by a large cash outlay, which is associated with the processing of wood: sawing timber, harvesting boards, manufacturing trusses, beams or pieces of furniture.All this, of course, you can buy in retail trade network, but when you buy a brand new tire sawmill all the costs will pay off quickly, and with your own woodworking machine you build a house, bath, garage, country house and a summer pavilion.
main purpose of homemade sawmill bus is a high-quality longitudinal sawing logs of any wood for the manufacture of edging and edging board, veneer, rails, carriage, sawing lumber and thinners.Sawmills this type are designed for the production of small batches of lumber, processing logs and producing non-standard special-sized workpieces.
Bus sawmills do not require a large area for installation, and can be freely installed on a limited land area.Of course, the chain sawmill will not replace Otsilindrovochnye machines or ventsevomu cutter but cut lumber and board you will be able to make their own hands.In the photo you see the bus sawmills that distinguish machines that work on the electrical network and are stationary plants as well as stand-alone options, running on gasoline, which can go into the forest and harvest the desired timber.
tire design sawmill
Bus sawmill consists of a frame, clamping stops, rolling carts, rollers, carriage, electric motor, tires and chain saws.The frame sawmill is lightweight, so it can be transported in the trunk of a car.Tire sawmill can be relatively easy to move and set in the immediate vicinity of the timber that is sawn - timber stock or construction site.
can be cut in the tire sawmill logs of almost any length.And if you provide in drawing a makeshift bus sawmill additional installation of another section, so it is possible to increase the length of the log still a couple of meters.It is considered very beneficial when building a house or a country house for the production of slabs.
is simple and convenient is the design of clamping stops.Two clamp located at the end and the beginning of the log, the log is pressed against the stubborn screws flags.In the process of cutting can omit stops at the respective level.
mobile cart can be installed from a steel plate that has a thickness of 5.6 millimeters.It provide wheel and thrust area.Then she put on rollers or bearings.As a circuit for the trolley can be used on the combine circuit.Use of sharpened chainsaw cutting guarantees the availability of longitudinal flat surface cut.Such a saw is fixed on a special carriage, which moves on rails through frame.
Her role perfectly perform two steel channels, which have a length of 8 meters and a height of 0.14 meters.At a distance of a meter and a half of the entire length of channel bars bore holes, which are usually installed in the screed, for example, segments of the water pipe.The entire structure is made with their own hands tire sawmill to be installed on the rack.
power unit on the bus can be a sawmill three-phase electric motor, which has a capacity of 5.5 kW, or you can use an automatic four-stroke gasoline engine capacity of 5.5 hp.Cutting speed in this case is respectively 18.6 and 9.7 meters per second.The motor is placed on top of the special welded parts.
tire and chain on a power saw used conventional.When cutting tires stiffness eliminates a number of defects such as, for example, the wave and the precision cutting comes to ± 1 mm at 6 meters in length.During sawing kerf bus it is no longer than using a circular saw.In the end conveniently mounted locking device on the bus sawmill, which is intended to secure the log.
operating principle of the bus sawmill
operating principle of the bus operation is similar to the sawmill Sawmills Tape.The log in the process of processing is stationary and the cut made with the saw, which is mounted on a moving carriage.The main difference between these models lies in the application of the saw chain attached to the bus.
The chain is much cheaper than those that are installed in the band saw, faster and easier to be prepared to work and long service life is different.But fabric tape can not be used after working for 10 hours, so that it restore its properties.If not correctly sharpened or distributing teeth, the fabric tape comes into disrepair, and the timber is obtained poor or unusable.
Thus, use of the private sector cloth tape associated with many problems.Saw the chain that used in tire Sawmill, do not need such care and thorough preparation for work, as evidenced by the video of the bus with their hands sawmill.Circuit sharpen and immediately set to the sawmill.Moreover, even with poor quality sharpening cutting quality will not suffer: it is due to different tire stiffness and waviness and barrel will not occur under any circumstances.
Bus sawmill can be installed in any room, if the condition of protection of electrical equipment from the effects of rainfall.It should be indoors or outdoors.Sawmill is placed on level ground.Under the railway line if there is no accepted to put an anchor.The rail track and rail exhibit on the carriage horizontally.
buck bus sawmill commit horizontally, moving the carriage manually to the bus.Moving conducted by guide elements with respect to the processed logs that still located.Height adjustment knob is rotated manually lowering or raising the bus.
To increase the useful life of the new chain previously recommended it submerged in oil, and kept there overnight.If worn drive sprocket, you can not put on her new chain, since it is necessary to change the old star, as shown in the video of the bus sawmill.Watch out during the chain for its tension, which should be carefully regulated, and lubricated tire, so regularly, pump oil nipple to the nasal star bus.
Intensive work on the bus causing the need sawmill works regularly sharpening saw chains.Sharpening average accepted to do every half - two hours depending on the density of sawn timber.For sharpening the saw chain sharpening machine must be used, which easily adapts to any pitch angle and blade sharpening.To avoid stopping the process of sawing, it recommended to always have a supply on hand replacement saw chains.
Manufacturing bus sawmill
Bus sawmill, made with his own hands, will become a reliable assistant in the farm.The bed is made of 2 to produce steel channels, which have a length of 8 and height of 0.14 meters.In addition, use metal angles or rails.Billets are needed that are ideal straight shape.U-sections along the length of bore holes with a diameter of 14-16 mm close at a distance of about 1.5 meters, which can be seen in the drawings bus sawmills.
In accordance with the number of holes necessary to make special ties of lengths of pipe for water.Details must be secured with screws or threaded studs.Components of design sawmill that pre prepared to assemble together and set on rack.The number of columns depends on the length.The last pillar is placed at a distance of one meter from the end of the guide.
To give structure rigidity should be rationally fixed braces.Then install a movable carriage, which is obtained from a steel mount plate thickness of 4-6 mm, and length - 0.6 meters, depending on the size of the motor.To pick up truck clamping plates and gaskets.
elements are responsible for ensuring the free movement of the mechanism, as shown in the video of improvised bus sawmills.At the same time very necessary minimum clearance.Screed gaskets is performed with the bolts.Eliminate cross clearance by attaching to the trolley thrust area.The trolley may be mounted on rollers or bearings.
on the shaft of the electric motor napresovan aluminum profile with two streams.The force from the motor is transmitted through the two belt on a pulley that is located on the cutting arm.Pulleys that the outer edge have a diameter of 80 millimeters, can take on two-wheel tractor.The driven pulley force is transmitted through the roller rotates on dvuhpodshipnikah, on a star, and then on the chain.
circuit is used to the trolley with a saw and motor.The chain on the tire sawmill should be well stretched, as in the photo makeshift bus sawmill.The tension belts and chains can be done manually by two fixing bolts and nuts.You can additionally put on the chain tensioner bolt tensioning, but efforts forceps enough that the chain is taut.It is recommended for ease of chain it is constantly lubricated with engine oil.
Steering wheel mounted on one of the sleeves of stars, which are located on the edges of the guide.You can then engage in the manufacture of the locking device logs: a pipe diameter of 3-4 cm movable rod inserted that the stop at the desired height includes screw M8.Fixed top rod pressing members having a length of at least 1.5 centimeters and a cam clamps.
After making homemade sawmill bus, you can proceed to its installation.Sawmill is mounted on guide rails with four support rollers.The rollers can be altered from the same motoblock tensioners.Remember that the bar and chain must be special for longitudinal cutting.The chain will be sharper, the better to saw wood.On the day you will have to change from 2 to 4 circuits.In the photo you can see the bus sawmills characteristics chains and tires.
to set the thickness of the boards can be installed to cut a vertical screw, which moves with the rotation of the frame with the saw unit.The size of a ruler began to exhibit, and when you become proficient ramschikom, you get to set the thickness of the workpiece on the turnover of the screw.
At the beginning of secure log sawmill tire according to the drawings with their hands, on open tank with oil faucet, run the electric motor, the lower the screw frame and you can start moving bus sawmill.The force with which the rails will move sawmill, small.This rate depends on the thickness of the logs, rocks and knotty wood, wood state - dry or fresh, as well as the level of ground circuit.
Manufactured their own hands sawmill is able to cut any wood, but it is advisable to use svezhezagotovlennuyu, not dried, as they say, steamed.Easier to cut pine logs, soft hardwoods - alder, maple, poplar, aspen, hard - ash, elm, oak.The hardest work with steamed acacia, because this breed is very dense and hard wood.
Homemade sawmill is able to saw logs with a maximum length of 7 meters and a maximum diameter - 40 centimeters.The speed of sawing wood material can be described as - a three-meter board pine billet that has a diameter of 25 centimeters, saws 7 minutes.
So you learned how to do their own bus sawmill.The bus with the high quality sawmill wood cutting, precision, compactness, low price tire sawmill, simplicity of design, reliability, light weight, ergonomics in the operation, ease of transportation, durability and safety.If you have a lot of building, it's time to think about making the tire machine that is designed for longitudinal processing of logs.