selection of instruments depends on the characteristics of the art, which will be carried out future product.The basic and universal tool for woodcarving: two knives, flat and round chisel.
- Additional tools for carving
- knives carving knives
- Bogorodsky knife
- How to choose a knife
- Types of chisels for carving chisels
- How to choose a chisel
Additional tools for carving
Nichrome wire is used in this method, slotted thread is burning through.This thread, with a strong heat, burns the thin line in the workpiece moving along the contour.Nichrome wire can accurately cut out the smallest details and patterns.
Leka - drawing tool that allows you to transfer to tree different line pattern for the future.
Knife-jamb - the name refers to the fact that the knife has a beveled edge.The knife used for cutting contours, well suited for a geometrical carving.Just a kn
These knives are designed for a geometrical carving, it is good to work out different rounding, details with crooked lines.Well suited for contour threads, and to work out the curves and bends.
knife blade can perform both rough and fine woodwork.The name of the instrument comes from the village of Bogorodskoye, where craftsmen carve the famous Bogorodskoye wooden toys.The size of the blade of the knife depends on what kind of work is more focused knife.Rough work - a rough preparation of wood, cutting of office drawing and sculpture.For rough work optimal blade length is 70-90 mm for delicate work the best fit 30-60mm.The knife is good at study of small details, where used only the tip of the blade.
Option bogoroskogo knife, it is designed to force the thread, it is suitable for cutting out figures of people and animals.Often used when you only need one tool.The knife works well with soft wood.The long handle provides maximum transmission of force to the knife.This is a convenient and practical tool.
How to choose a knife
knife should be made from good tool steel and have a well-sharpened.It is better to give preference to "Bogorodskoe" knife, it is suitable for execution of the consignment note and the volume of the thread, as well as for conventional planed.Knives for work should be at least two: small and large.
Types chisels for carving
chisels are used to create products or sculptural relief technique.
Straight chisels - their width from 5 to 30 mm, need to work with a background study of the contour of the product.
chisel-bong with a blade cut from 45 to 70 degrees is necessary for geometrical carving techniques.
Blade width of chisels have no more than 3 mm.They are bent in the lower part of the tool and the blade has a different shape.Chisel-tserazikom convenient to strip background in hard to reach places and also cut narrow hollows.
essentially the same semicircular chisels, but they have a curved sheet.Used for plane-and relief carving.With their help it is convenient to choose the stripping recesses background process bulge, cut various shaped surfaces.The minimum width of the webs 2 mm.
Apply with a sample of narrow lines of the grooves.These chisels are needed in almost all types of thread.
How to choose a chisel
chisel should be made of quality material, well lie in the hand, to be comfortable to use.When you select a tool to draw attention to the quality of steel, the purity of treatment, the correct sharpening the blade.Durability depends on the length of the chisel, the less long, so it is stronger.It should also be remembered that the thicker blade chisel, the deeper the cuts obtained.Small semicircular chisel can be made most of thick needle from the medicine dropper.
When choosing the tools you need to get acquainted with the company manufacturer, quality materials, easy to use.Better to buy tools for carving from reputable manufacturers that operate on the market.Tools can be purchased in a set or individually, the main thing that they were satisfied with the high quality and good materials.