Doors are installed in doorways indoors.They can be hinged, sliding, folding and rotating, single-wing and double wing, made of wood, plastic, glass and even metal.
Folding doors are moving in the doorway there and back without creating problems in the narrow corridor, orin the kitchen.However, the sounds and smell of cooking and whether they are detained mainly serve as a screen.There is a "bunching", solid and with narrow glass inserts in each link.Hinge strips of plastic can be coated with natural wood or completely made of solid wood.Installation of such doors is very simple, they are usually hung to the upper guide rail of the door frame.The kit includes a simple constipation.
If you prefer them, it is better to opt for sliding doors on two guides: the top and bottom.Some of the rooms more comfortable sliding door on rollers.Desirably, the sliding door was as light as possible.
easiest - this skeleton door, collected from bars strapping thickness of 2.5 - 3 cm and a width of 4 - 5 cm, lined on both sides of a thin plywood, fiberboard or cardboard.The lower and upper strapping bars made wider because the design attached thereto with casters.Inside the frame rails give rigidity, the middle two of them - a distance equal to the height of the handle affixed.
rollers may be of different diameter and thickness (10 - 20 mm and a thickness of 5-10 mm, respectively).Produce them from any metal with a flat groove or ridge in the middle, the rollers move along the rail.If the guide is a round bar, its lower part grind to obtain a plane that better adheres to the floor.The guide is secured with screws, and so they do not interfere with the movement of the roller, the holes for screws are made to size screw heads and utaplivajut them.To guide not towered above the floor and did not interfere, it should embed (sink) on the floor.
The guide can also be made from a small section of angle metal or a metal U - shaped, or, finally, choose a groove in the floor and to strengthen on its edges metal strips.
rollers are inserted between two metal cheeks-plates that attach to the frame of the door.Between the cheeks do an emphasis of such thickness that the inserted roller freely.The guide should be two times as long as the door.
Door can move not only lower, but also on the upper rail of the angle of the metal, metal U - shaped or other profile.In this case, the door is raised above floor level at 5- 10 mm or more.Secure the bottom rail of the wall adjacent to the door or the guide does not do.
can put the door so that rollers will move across the floor, but it must be well prostrogat floor and set the upper guide.
suspension design doors can be deaf or demountable.
sliding doors, like the subway or train, more expensive, but the sound and zapahoizolyatsiya them better.This leaves the door when opening to the cavity inside the adjacent wall.Cheap version of the sliding door when the already existing interior doors removed from loops (loop was removed and the traces of their shpatljujut and paint), then hung on two bearings on a narrow rail above the doorway.Complete sets of the necessary details can be found on the market.
door today often disguised as a mirror, shelf, cupboard.Accentuate the door to the hallway and - on request - in other areas.
large number of modern doors from the combined materials are collected, but the most traditional material for doors - wood.