begin construction of a fence made of profiled sheet should be a preparation materials.Calculation of the necessary elements for fences shall be based on the perimeter of the site, the type of soil, the complexity of the relief.
- Calculation materials
- supporting pillars
- Cross lags
- How to build a fence with their hands
- decorative fence with their hands
- Wicker fence
- fence Stone fence
- fence of wood with their hands
So you need to prepare:
- sheeting.There are several varieties of the profiled sheet.Will suit wall or C8 brand with an increased crest, but not more than 21mm.
- support legs.You can use several options: brick, concrete, asbestos-cement, metal (pipes), wood.The best choice is a round steel tube with a square cross-section diameter of up to 60mm.
- cross joists.It is recommended to use metal pipes with rectangular cross-section dimensions 60h25mm, wall thickness up to 2 mm.
- screws.Often purchased together with floorings in the corresponding color;
- Paint composition for coating the core portion barriers, supporting pillars.
determine the height of the future of the fence, calculate the amount of corrugated board.For example, you want to build a fence height of 2m.Prefabricated steel sheet has a length of 12m.So from a single sheet, you get 6 paintings.
Also consider the amount of perimeter.
Typically, the distance between the support columns (in this case - between the pipes) is 2M.Knowing the perimeter of the site, given the terrain, easy to count the number of poles.
IMPORTANT! height columns should be calculated taking into account the penetration of support of 30% of the total length.For example, if the height of the barrier is 2m, then the support should have a length of 2.7 m.
Counting cross-lag is carried out based on the height of the boom.If the fence is planned height of 2 m, while on one sheet of corrugated board requires cross-logs 3.
At the height of the barrier at the number of cross-lag - 2 pieces (bottom, top horizontal).
How to build a fence with their hands
building technology using corrugated fence is divided into several stages:
- Excavation (drilling) holes designated for support.Using advanced layout perimeter pit dug in response to calculated depth sufficient to set the support post.For example, if support is deepened to 70 cm, while the depth of the hole should be prepared 80-90cm.
- installation supports.Initially preparing mortar and then concreted support.
- mounting frame (of the transverse lag).Install logs can be welded or screwed.It is important to note that when installing joists should deviate from the upper / lower edges of the supports on 20cm.
- Mounting trapezoidal sheet.Installation start from the gate.Each steel sheet are aligned, secure the screws, the subsequent sheets are placed overlapping.
should also carry out painting of frame elements made of metal.
Recommended reading: fence with their hands.The choice of material
decorative fence with their hands
Craft can be a decorative fence for:
- fence beds;
- zoning area;
- track designation;
- decorating the landscape.
To create such a suitable fence wooden twigs, sticks, logs.Wattle is made on the support posts, which can serve as thick branches, small diameter metal pipe fittings.
weaves fence horizontally or vertically.If the rods are used, it is possible to weave them into a bundle simple weave pigtail.
effectively looks fence made of mini-picket fence and painted in bright, vivid colors.
selected planks are cut or small, nailed (screwed screws) to the prepared wooden frame and digged in the earth.
Such a fence made of stones of different shapes.It is best to use a flat stone.Formed using a cement fence around the perimeter of the flower beds, walkways.
use bottles for arranging decorative fences became popular because of the availability of the material and the possibility of manufacturing almost any form.
Bottles can be glass or plastic.They digged fastened to cement the fixture, wooden frame.Options abound!
fence of wood with their hands
fence made of wood prepared by different appeal, the possibility of realization of any design idea.In implementing the pretreatment of wood (coated with antiseptics), a fence for a long time did not require repair.
Besides being able to choose the shape, configuration, you can always arrange a spectacular boom sharp, all sorts of decorative elements.
Paint the wooden barrier can be in natural color, using paint tinting.You can choose any paint rainbow colors or apply a beautiful pattern, pattern.