If you need a reliable, durable and affordable at the same time the fence, we recommend that you stay on the choice of material for corrugated board as the sections.
- Features pofnastila
- Use material
- advantages of corrugated board used for fences Decorative
- fence of corrugated calculator
- Fences made of corrugated board to testify
- fence of corrugated turnkey
- fences without foundation
- Fences constructed of corrugated board with the preparation of the foundation
- Fences made of profiled sheet to the foundation, brick pillars, cap
- fence of corrugated cost
It profiled alloften used in the arrangement for the fences:
- suburban areas;
- industrial areas;
- construction sites.
Use a barrier can be as a permanent or temporary.Depending on the destination, of corrugated fences can be installed with the arrangement of the foundation of a building without an underlying cause.Typi
Decking material is made of galvanized sheet, profiled steel with the possible application of color.
protective coating and decorating sheeting can be made of:
visually resembles corrugated slate.Wave height material may be different.Corrugated sheet may be rectangular, trapezoidal, sinusoidal or a complicated shape.
considered in the construction of corrugated board used for:
- roofs, canopies, awnings;
- frame structures;
- permanent formwork.
versatile material is supplemented by a relatively small cost.The metal sheet of the sheeting available can be purchased for $ 5 per m2.
Making the material is made of sheet metal.Consequently, the length of the sheet can be absolutely any.
sheet width depends on the hardware manufacturer and is 980-1850 mm.It should be borne in mind that "utility" is less than the actual width of 40-80 mm.This feature is due to the technology installation.When laying the overlapping sheets are fixed.
thickness of the sheets and a standard 0.5 mm, 0.55 mm, 0.7 mm, 0.8 mm and 1.00 mm.By choosing the thickness, the appointed of the future project, climatic conditions.The most popular profiled with a width of 0.5-0.8 mm.
corrugation height depends on the kind of "pattern" and is 15-130 mm.
To properly calculate the fence of corrugated need to take into account the dimensions of the acquired material and the length of the perimeter fence of the future.
IMPORTANT!Apparatus barriers usually performed using a special grade of a profile plate.Builders recommend the use of corrugated board for the fence C8.
advantages of corrugated board used for fences
presents the material has a significant advantage.Among the main advantages of note:
- light weight that simplifies delivery, installation;
- durability due to application of a protective coating of zinc and polymer;
- choice coloring pages in the catalog RAL;
- resistance of the outer polymer coating ensures that the brightness of the original colors over 50 years of operation;
- versatility, allowing the use of sheets in various designs;
- economy due to the relatively small cost and simplified installation technology.
Not only do qualitative indicators profiled popular.Production of the material is submitted to high-technology equipment.Therefore, it is possible to acquire not only highly reliable, but also aesthetically pleasing sheet.
So, decking may have coloring simulating the structure and color of the wood Dora breed.You can also buy sheets of color by applying decorative stone masonry.
Put a barrage of profiled sheets can be on conventional pipe supports, and the pre-built brick, rubble, concrete foundation with pillars beautiful device.
fence of corrugated calculator
If independently determine the amount of materials and components needed for the construction of the fence, you can not, then we recommend using a convenient online calculator.
specialized service allows calculations taking into account the major expense items:
- the total length of the projected boom;
- height of the fence;
- method of installation;
- material supporting pillars;
- depth and method of installation of support pillars;
- number of vertical lag;
- number of screws;
- number of caps for pillars (if used metal poles);
- method of fixing steel sheet;
- type of coating material;
- coloring sheets;
- number and size of gates, gate;
- call gager;
- size of transport costs.
course, the calculator can not take into account the different nuances.For example, if you decide to order a combined fence, where the pillars of support will be used, constructed of brick or natural stone.
Note types of doors and gates, which are automatic.It is necessary to provide additional device structures.Also, online calculators do not usually take into account the locks that are needed for doors and gates.When
complication gate structure designed to deal with the necessary quantity of relevant materials will help you to a professional manager specialized construction companies.
Fences made of corrugated board to testify
economically expedient to use corrugated board, if necessary, the construction boom in the country site.
Territory garden fence can be no arrangement of a foundation base.The installation process consists of several standard events.The main stages are:
- marking the perimeter of a future boom length measurements;
- preparation perimeter with land clearing and leveling of the relief;
- markings indicating the places under the supporting columns;
- drilling (excavation) wells;
- installation supporting pillars for fences, gates, gates and concreting;
- device mount frame cross-lag;
- fixing doors, gates;
- assembling profiled sheets.
- If relief perimeter has large differences (25-50 cm), it is necessary to carry out the alignment by removing the soil or bedding.With increasing height differences need to provide a stepped arrangement of the fence.
- If the type of soil heaving, then it is better to take care of the construction of the foundation.In winter, this land is chilled and its structure expands.Buried supporting pillars "come out" outside the fence and simply collapsing.As an option - the use of pile supports, do not require concrete foundation and the layout and ensure the stability of the fence, even at low t.
- as supporting pillars is better to use rectangular pipe.Pits prepared for the installation of the columns must have a cross-sectional size of at least 20x20 cm. The deepening of support should be carried out at least 30% of the total length of the column.For example, if the bearing length of 2 m, then deepen the column should be at least 70 cm.
- Span is typically 2-3 m, and depends on the length of profiled sheet acquired.Knowing the length of the section, it is possible to calculate the number of poles.
- Before pouring the concrete into the prepared holes under the support poured sand.Sand bed protects the supporting column of the freezing of the soil.The bed height was 100 mm.
- for doors and gates should be used to support a large cross section.For example, if the intake pipe section 60x60 selected, then the gate and the gate, use the pipe cross-section 80x80.
- number of cross-lag is calculated taking into account the height of the profiled sheet.For a standard fence having a height of 2 m, only two horizontal crosspieces.The distance between the upper part of the sheet and the cross bar (between the bottom of the sheet and the cross bar) is 20cm.
- Mounting trapezoidal sheet is carried out using the horizontal level, in order to avoid twisting.
- screws for fastening sheets is better to choose "color" to the professional flooring.
- support posts should make the top or use a protective cover to prevent the ingress of moisture and dust.
Following these recommendations, you can even build your own reliable, steady fence sheeting.
fence of corrugated turnkey
In the absence of free time, experience and desire to get high-quality, durable barrier, please contact a qualified construction company and order the installation of the fence, "turnkey".
main options under consideration arrangement fences are:
- fences device without foundation underlying cause;
- fences erected with the construction of the foundation base;
- fences erected by the device of the foundation, brick supporting pillars, cap.
fences without foundation
This option is the most economical cost and construction time.The installation process only concreted pillar supports.Welded to a pole frame consisting of profile pipes of smaller section.Corrugated base is attached to the carcass by rivets or screws roofing type.
This kind of economy fence manufactured in 2 versions:
- solid fence.Racks and Decking sewn from the front of the barrier can not see them;
- fence, in which the support legs are visible.
Fences constructed of corrugated board with the preparation of the foundation
This option ensures reliability, stability, and durability on heaving soils.This method of mounting the barrier is suitable for large drops of relief, if necessary, the erection of fences on the slopes.
under the foundation base of the trench breaks.Shuttering board is formed.It fits inside the linked welding fittings, and installed racks.The finished design is filled with high quality concrete.
The process of installation is similar to the above.On the set cross bars are attached, then - mounted trapezoidal sheet.
Fences made of profiled sheet to the foundation, brick pillars, cap
This option though is the most costly and time consuming, but is characterized by higher reliability, durability.
being prepared foundation on which later laid base.Additionally, built brick columns tab inside steel pipes.The bars are mounted mortgages elements for fixing sheeting.
After preparing the layout of complex installation carried out trapezoidal sheet, pre-framed metal profile.
IMPORTANT! Any option involves the use of forged items, use double-sided plating steel sheets, powder coating.
Price to install different fences.Cost includes the costs of materials takes into account the complexity of the design and complexity of installation.The easiest installation option is estimated at $ 10 per 1m2.The cost of the most expensive fence arrangement starts from $ 100 per square.
$ fence of corrugated cost price
sheeting is characterized by quality steel protective layer, color views, depending on the manufacturer.
can purchase corrugated sheet for $ 4 per 1 m2, and can be purchased at the price of corrugated board $ 40 per 1 m2.
rates also take into account the material dimensions.An important indicator is the thickness of the sheet.
The cost of construction of the fence of corrugated board is also included price:
- support posts;
- materials for the foundation (if necessary).
should take into account the cost of installation work themselves, which in practice is equal to the cost of spent materials.
Considering all the nuances, you can determine the minimum cost of everything obstruction using profiled sheets "turnkey".Price is $ 10 per 1 m2 of construction and will increase with increasing design complexity.