choosing pillars designed everything for the fence, consider the load on the bearing, the purpose of the barrier.
- Wooden poles
- Screw pillars for a fence
- poles for the fence of corrugated
- Concrete poles for the fence
- rectangular pillars
- round pillars
- metal poles for the fence
- fence with brick pillars
- poles for a fence price
If the fence is projected massive, natural stone, brick, concrete slabs, forged elements, while the columns must have the appropriate size, solid structure.
If the barrier will perform decorative, dividing function, such as a summer cottage, then you can use wood, plastic bearings.
It is advisable to use wooden supports for:
- temporary obstacles;
- front gardens;
- wicker fences;
- low hedges.
Before installing it is recommended to treat the wood with protective antiseptics, such as copper sulfate.Then you can count on durable supports up to 12 years.
IMPORTANT! In the absence of appropria
clog these poles to a depth equal to 30% of the total length of the support.The distance between the posts is determined by the choice of fabric-reject.For example, if a fence, then a sufficient distance is 1-2 meters.
additional protection bars prevent the caps from being destroyed, all kinds of caps worn on top of the poles.With these elements, the moisture does not penetrate inside the column, ensuring an extension operation of wood support structures.
noteworthy that the wooden fences do not require resettlement base.The foundation for such fences do not necessarily build.If the fence is used for brick, then the presence of the foundations necessary and recommended bars made of pipes.
Screw pillars for a fence
supports, such as screw piles, have a term reliable operation up to 100 years!In the selection of the type of soil columns completely irrelevant.Load presented by the support can be quite high.In addition, when installing the fence you will not need the construction of the foundation.
Installation of supports made screwing.In this soil, falls between the blades, significantly compacted, forming a solid subbase.Therefore cement pipes installed with blades is not required.
After installing a screw post is cut.Top welded necessary supportive platform.Channels, angles, and other fixing elements to a support attached easily by welding, screws, bolts.
IMPORTANT! main condition for effective mounting screw is screwed pillars pipe below the level at which the soil freezes.
sold ready screw pillars are already coated with a protective layer.Therefore, paint tubes with blades is not required.
Mounting screw columns is simple, fast.In addition to these advantages, such structures can be removed and used for other objects.
poles for the fence of corrugated
If you plan to build a fence of corrugated board, then feel free to purchase rectangular pipe - this is the most advantageous variant.
Columns made of rectangular (square) tubes are different:
- sufficient strength with low weight;
- ease of installation;
- affordable cost.
Also today, manufacturers offer support already painted with the necessary construction dimensions: length, cross section, wall thickness.
Usually when setting up / down such supports closed with special caps or sealed in order to prevent unwanted moisture inside.Although you can do without such measures, provided that the wall thickness of the tubes are permissible (from 2.5mm).
Setting columns under consideration is carried out in stages:
- prepared pit;
- pour sand layer in the 3-5 cm;
- set columns;
- pour gravel, crushed stone layer at 10-20 cm;
- poured cement or concrete.
When installing, it is important to monitor to bars were steady.It uses a traditional building level or equivalents.
process of hardening of the solution takes time 1-3 days.Only after the final grouting can be carried out installation of the fence.
Concrete poles for the fence
usually concrete pillars are made on the spot due to the high cost of the fence arrangement delivery to the object of massive, large-sized bearings.
The manufacturing process is:
- tide prepared in a special concrete formwork;
- insert embedded fasteners.
rectangular concrete columns are manufactured in a rectangular wooden formwork.The internal parts of the boards thoroughly stripped.Fits inside a thin polyethylene plastic (can be patterned) fittings.
IMPORTANT! wire used for reinforcing the brand BP-1 or intermittent reinforcement.Rods (3-4 pieces), fixed welded cross members are inserted into the prepared formwork.
Concreting pillars of circular section made of plastic pipes or glassine paper - cardboard impregnated with bitumen composition.
tube section (1 m in length) is cut longitudinally.Subsequently, during concreting, the two parts are held together by metal plates.Inserted inside the reinforcement bars.This design is set on top of the already flooded and frozen underground part of the formwork solution is poured (concrete, cement).
If necessary, increase the height of the manufactured column, after setting this part, the pipe moves to ¾ concreted over and over again with the reinforcing rods.This continues until it reaches the required height of support.
IMPORTANT! to design the formwork well, "slipped" inside of the tube is lubricated with engine oil.
metal poles for the fence
variety of iron bars for the fences can be made by, or you can buy ready-made products required configuration, color, size.
Metal poles are designed for the installation of fences, have a number of advantages:
- increased durability;
- corrosion resistance;
- ability to withstand high loads;
- possibility of manufacturing all kinds of forms;
- easy to install;
- for use in a barrage of different types of structures: for brick fences, made of corrugated board, wood, concrete barriers;
- possibility of the desired painting of color;
- relatively low cost.
When ordering you get iron columns support legs of desired length, apical caps with different shapes, necessary for the protection of columns of unwanted moisture.Also supports may be ready kreplleniya intended for installation bandstop canvases wicket gate.
price considered various metal bars.Cost is formed by taking into account:
- metal thickness;
- a protective coating;
- availability locking fasteners;
- presence of apical caps;
- complexity of the form.
fence with brick pillars
Boom for which are made of brick pillars, different aesthetic appeal, durability guaranteed.
fences are also distinguished by the high price, the need for accurate calculations.Construction of a brick fence takes a long time required masters to the tab of the foundation base, installation, concrete pillars inside metal pipes, laying bricks.
In addition, experts recommend for brick fences to draft in order to avoid mistakes in the construction of the structure, overspending materials, unwanted destruction due to improper construction.
basis brick pillars is:
- metal pipes, reinforced at the base area.
foundation usually settling belt, be sure the base is reinforced with mesh, so that later no problem withstand the weight-bearing brickwork.
themselves pillars laid out facing korpichom.Interim protective fabrics can also be brick or with inserts:
- forged elements;
- steel sheet;
- concrete slabs;
- slate slabs;
- metal sheets.
$ poles for the fence.Price
cost on pillars necessary to fence everything is different because of differences in the basic parameters:
- material used for the manufacture of bearings;
- sized column;
- complexity of the form.
example, metal support of a metal pipe with a protective zinc coating sizes 40x40, height of 2m, worth $ 10.By increasing the pipe cross-section is increased and the price.