plaster without lighthouses - work for nelenivyh Thus not only has to keep flatness vigilant, but also the probability of rework station is high.Because if you have not developed a subtle sense of perfect flatness, choose a proven way to plastering a lighthouse.
- plaster without lighthouses: VIDEO
- plaster beacons: technology
- Plastering of walls on beacons: VIDEO
- plaster beacons: the price of work and materials
plaster without lighthouses:VIDEO
plaster beacons: technology
Plastering of walls on beacons allows you to achieve a good result, in which the admission will be only 1.5 mm (if the grout of lime or cement mortar).In this way, by the way, you can develop a fairly high speed, that's fine too.
to work you will need:
- level of up to 2 m in length (level must be regulated eyes);
- beacons (as a beacon, you can use a wooden rail 10x10 mm or conventional metal beacons of galvanizing);
- float foam (karbolit);
- gum- "Hungarian" (can substitute conventional cord);
- protective gloves;
Rate on the eye surface roughness of the walls and pre-determine the estimated thickness of the layer of plaster.
From the corner of the room back down the order of 30 cm and outline the structure for securing the lighthouses in equal portions.Note that the surface finishing 2/3 portions of this solution is to retreat from the wall.Because of the fixing composition of doing a kind of vertical line.
Lighthouse is necessary to "drown" in the applied solution on the wall before installing the strips to the desired level.At the same time keep an eye on the peephole.Thus, we first need to install two beacon at the opposite ends of the wall.
IMPORTANT! If working with plaster you have for the first time, do not immediately threaten the large amounts of work.Not everything can happen, as you would like or simply do not have time to finish the work on time volume.Start small: Limit one wall.
In our case, a plastering the brick wall.At any masonry, anyway, there are small gaps or cracks: they can be applied with advantage - it is the perfect base for fasteners.
If your walls are not those gaps, drill hole and hammer it anchor.
data needed for fastening hooks cord or "Hungarian".One anchor is attached in the first beacon, the other - the plant for the second beacon.Fasteners for lighthouses to be executed horizontally.Between the fasteners pull a cord (with contrast red cord is easier to work with than the stealthy black or white).
first lighthouse established.
Intermediate beacons installed so:
Determine the location for the intermediate beacons.In relation to each other, they must be placed at the same distance so that the rule that leveled plaster was slightly longer intervals.
IMPORTANT! For the novice, performing work with your hands, it is better to choose the shorter terms and, accordingly, to establish more 1-2 lighthouse at a distance of no more than 1.2-1.3 apart.Length rules accordingly, should be equal to 1.5 m.
Places installation of intermediate beacons dotted mark on the wall.The dotted line is brought up to the intersection with a red cord and a drill hole for him dowel / screw.
inserting the plug into the hole, screw is screwed (screw cap should not extend the cord).
IMPORTANT! After screwing, screws must not touch the cord!
This system layout will install beacons to plaster in the level of the plane with minimal errors, and even at all without them.
As is the case with the first lighthouse beacon further installation is made on a marking applied to the fixing part.Intermediate guide also pressed into the solution by placing strips slightly above the screw.At this level you need to stretch a hat screw and pristukivaya lighthouse gradually immersed in the bar attachment to lighthouses (do not forget to look in the eye!).
Mounting beacons completed.
IMPORTANT! If you follow the instructions, exhibiting beacons should not take more than 20 minutes (with an area of one wall 18 m²).
Give a fixing composition applied under the beacons, a little dry off (1 hour is sufficient).Further, the intervals between beacons can start throwing the wall surface with a solution.To do this, use a spoon or trowel.
INTERESTING: When in a hurry, you can try to throw a wall solution manually, without using any additional tools.The main thing - to reliably protect your hands from getting the mixture to the skin.
IMPORTANT! What area covered with plaster - it's not just you.It should also focus on the material properties of the walls.For example, the red brick in the masonry absorbs water faster than white or silicate, in which the solution can cover an entire wall at the same time.On the walls with red bricks start to work better with small squares, and on the walls with white, once threw the entire surface, and more will have to wait, because the solution must cease to sail along the wall, giving a bit of moisture masonry.
Tricks: If you know what will work in a damp room or at the cold walls for fast drying plaster in its composition can be added alabaster.
solution, supporting beacons should be removed with the help of rules, it is slightly leaning to the beacons.This much pressure is needed.Go through the rule on the surface of the solution and the lighthouse needed several times.
IMPORTANT! If pressure is too strong, at great length the rules (1.5 m or more), the bar may sag in the middle and, accordingly, the arc dent caused by the solution.Because the pressure on the rule should be done as close to the lighthouse.
Trim off any excess use for the second time, mix collected from the surface of the solution, and they jammed the gaps and voids.
work further check level.After - remove beacons and gently formed furrows clobbered solution.
wait until the drying composition and alignment of the walls in the initial phase is completed.
Plastering of walls on beacons: VIDEO
plaster beacons: the price of worksand materials
Buy beacons of up to 3 m can be in every home improvement store.Price them rarely exceeds $ 0.8-1.2 (depending on whether it is plastic, wood or metal beacons).
In some cases it is possible to mount and beacons plaster buy - a small but reliable fasteners 10 cents / piece, fastened to the wall by 6 screws (in one package of 20 pieces).
The cost of plaster is determined by its type: for example, Knauf HP START (30 kg / y.) - Universal plaster is 8.5 $ / y.mixture at a rate of 1 pack of 4 m² (10 mm layer of plaster) and multi-finish plaster Knauf (25 kg / y.) for rough surfaces is from $ 11 / pack.at a rate of a mixture of 1 to 20 m² packing (only a layer of 1 mm).
If in doubt how to set the beacon and the plaster had not met before, ask for help to the master:
- plastering walls in Moscow costs about 180 rubles. / M²;
- in Kiev - from 35 UAH. / M².