There are many materials that can be used to complete the appearance of the house, but the decorative plaster facade - the most popular method of external decoration of buildings.Stucco facade bears not only a decorative sense.
It protects the walls from outside influences, does not allow moisture to penetrate inside, it protects against erosion and mold provides great insulation and, consequently, reduces heating costs.Returning to the aesthetic component benefits plastering facades, happy choice of textures and colors that can be changed with time.
- Decorative plaster facade
- technology exterior trim
- most popular kinds of drawing
- Decorative plaster facade, videos:
Decorative plaster facade
Decorative plaster facade can be a special facade, basement,but can - Universal applicable for external and internal works.Plasters are different depending on the underlying component.
- Mineral plaster - the most durable and cheap.The main component of a plaster - cement.Perfect for decorative external parts of buildings due to their properties.Basically, after the application of mineral plaster facade paint coloring is required, since the choice of the color of the plaster is low.
- Acrylic - more elastic plaster.With this less prone to cracking.At the same time it protects against the accumulation of excessive moisture and has good vapor permeability, resistant to temperature changes.Facing front acrylic plaster is convenient because it is sold in the form of a ready to spray mass prepacked for buckets.
- Silicate - plaster on the basis of liquid glass.Its advantage is that it does not attract dust and dirt and can be used for decoration of different walls.
- Silicon - characterized by large color gamut, high elasticity, self-cleaning and high price.
Article topic: types of plaster.
technology exterior trim
finishing plaster facades can be implemented on top of insulation, such as foam.
There exists a system of warming, technology or external finishes as the "wet front."
- Preparing walls .The walls are cleaned of dust, dirt, mold, fungus, stains cleaned off the excess protruding from the masonry mortar.If the armature has protruding pieces or other metallic elements, they are cut, if necessary doctored masonry.Clean and more or less flat wall primer is processed to a heater firmly stuck to the wall.
- insulation. cap is mounted on the border of the profile.He exhibited with the help of the level, as it will be leveled at the first layer of insulation.Kneading glue is applied to the sheet of insulation on one side.The adhesive may be applied uniformly over the entire surface or on the perimeter and the middle grudochkami more uniform sheet.In terms of exhibition and pasted the first lower layer.The following series of foam must be mounted in a viscous - joints should not coincide.The distance between the plates must be very small - they should be joined firmly.When the cement is dry well (about a day) produced foam fixing plates with dowels, the number of which is greater, the greater the height of the building, the weight of the thermal insulation system and the difficult weather conditions.
- Grid.On foam covered with a thin layer of glue, which is pressed against the reinforcing mesh.Thereafter, another layer of adhesive.Either immediately straightened mesh and once the glue is applied.Protected corners insulation.
- Finish - primer, decorative plaster and paint.
most popular kinds of drawing
So facade of plaster is prepared, it remains to choose the color and pattern, but rather the texture of plaster.As for color, there are two options: apply the plaster and then paint in the color you want (such as mineral) or buy, for example, acrylic or silicone plaster desired color.The surface topography determines not only the technology of plaster facade.On the drawing affect grain size plaster filler.There are a few of the most popular kinds of drawing.
- Koroed.Due to the structure of the plaster mixture turns drawing a hollow and rytvinkami.Koroed applied with a stainless steel trowel and desiccation it is patterned.The resultant texture will depend on the trajectory of the float on plaster.
- lamb or plaster "under the coat".It's one texture, but different materials and application methods.Classical "coat" performed a cement-sand mortar with a stick and a broom, mesh or hurdy-gurdy: equigranular surface is achieved by the method of application.Plaster "lamb" can also have a different composition is applied with a trowel.The texture of the surface is obtained thanks to the grit of the solution.
- Rustovaya texture - grooves and ridges on the plaster, for example, mimic the masonry.
Repair of the facade can be done by hand.
Decorative plaster facade, videos:
However, one thing stucco or paint the facade of his hands, and another thing - the complete set of external finishes, such as "wet front."However, even then, and another is better to trust the professionals.Even the rather big price can go work for less than the cost of alterations after their own experiments.The cost of plastering work are different.Find out how much a particular type of work can be sites of construction companies.
- plaster facade - price in Moscow from 400 rubles / square meter.
- plaster facade - works price of Kiev from 80 hryvnia / square meter.