Plaster Rotband from KNAUF - universal dry mortar whose composition is based on gypsum binder with a light filler and some polymer additives, thus ensuring a high adhesion to the wall material.
IMPORTANT!On the territory of the Russian Federation sale materials Series Rotband allow certified hygienic characteristics of the product, the certificate of conformity and the sanitary-epidemiological conclusion.
- Plaster Rotband from KNAUF
- Stucco Rotband: machinery plastering the walls and ceiling with his hands
- Brief guide to work with the material composition
- Plaster Rotband: VIDEO
- Rotband (plaster): Price
- How much is the wizard?
Plaster Rotband from KNAUF
Plaster KNAUF Rotband is widely used in interior decoration: it can be manually plaster ceilings and walls with concrete, brick base, as well as the surfacecement plaster work on the surfaces of polystyrene and DSP.Use Kna
- allowed Rotband plaster walls in a layer of 5 mm.
- maximum size fraction - 1.2 mm.
- Plaster Rotband consumption which is about 8.5 kg / 1 m², dries approximately 7 days.
- When mixing of 100 kg of the starting material can collect up to 120 liters of the ready-to-use solution.
Stucco Rotband: machinery plastering the walls and ceiling with his hands
addition to rooms with normal humidity levels, plaster Knauf Rotband can be used to finishing surfaces in the kitchen and bathroom.After plastering the surface can be painted or covered with wallpaper without the need for additional spackling.Furthermore, Rotband can be used in the manufacture of decorative elements and for restoration.
used in the materials:
- plaster Knauf Rotband - 8.5 kg / m²;
- primer Knauf Betokontakt - 0.3 kg / m²;
- primer Knauf Grundirmittel - 0.1 kg / m²;
- beacon (Beacon Profile) Quantity depends on the characteristics of your room, as well as the length of the selected rule (beginners will be easier to work with Rule 1.5 m long);
- corner profile for plastering (number depends on the number of angles of the surface).
- trowel (trowel);
- corner spatula (for external / internal corners);
- plaster ridge;
- rigid sponge float;
- plaster falcon;
- spatula (length 50 to 90 cm);
- ironing board;
- container for mixing (the recommended amount of 90 liters).
Brief guide to work with the material
Before starting work:
The substrate on which the finishing work performed, must be at least + 5 ° C.
Base before starting work should be cleaned of dust, debris and exfoliation (with concrete in a separate procedure removed the remains of release agents).
IMPORTANT! When working with surfaces, strongly absorbent, surface pre-primed using a primer Knauf Grundirmittel (diluted with tap water in a ratio of 1 share of primer to 3 parts water).When working with surfaces weakly absorbs moisture such as concrete base coated with a layer of primer Knauf Betokontakt.This will improve the adhesion of materials.
on plaster in the corners of the plane is attached protective corner profile.
achieve flat support base is to install the flashing profiles on the plane.When this solution is applied to the attaching rear side of the profile with a pitch of 30 cm. When installing the wall profile, it is pressed from inside to outside.
- The capacity of not less than 90 liters (preferably use a tank made of plastic) pour 18 liters of tap water.
- in water at room temperature to sleep 5-7 trowels Rotband and mix thoroughly using a plaster mixer.Weight after mixing should not contain lumps - be homogeneous.Writing mass to stand for 5 minutes, then re-mix it.
plaster is applied to the surface of the wall, throwing his thick trowel.You can also use plaster falcon or a polutёrok.
on throwing by first leveling and should take no more than 25 minutes (after which time the solution begins to freeze).
thickness of the layer of plaster in the spraying should not exceed 30 mm.
After applying the solution to the desired surface it is spread using a rule.
IMPORTANT! If you need a thick layer of plaster, the first layer is not setted "tease" with plaster ridge, moving it to dovetail.After hardening of this layer, at least one day after setting the mixture is applied to a second layer gradually "thickening" plaster.
solution grab after 45-60 minutes, after which the surface can start leveling a metal rack (use a trapezoidal rail).To accomplish this milestone suit and a wide metal spatula.Tool, cut the excess solution from the wall and fill the post nakidyvaniya plaster on the surface of the recess.
- By drying the surface it can be closed with ceramic tiles (attach previously primed plaster primer deep penetration Knauf Tifengrund).
- If you plan to color the surface, the plaster after 20 minutes of application will be overwritten by using a stiff sponge or felt grater circular movements.Grater with the need to drench with water - it will help to align the recess and remove the fingerprints left on the surface of the plaster lath, or rule.By the appearance of the matte surface of the plaster is necessary to make amends, using a spatula or "floats" - stainless metal grater.Movements should be confident with a wide amplitude.
- glossy surface finish achieved by its additional smoothing metal float not less than 3 hours after the mixing of the solution and not later than one day after mixing liberally plastered surface is moistened and smooth down.The re-putty surface is not necessary.
- Decorative textured surface is achieved by rolling the roller surface immediately after leveling rule.In addition to the relief roller molding tool can be used, giving the surface thus any desired shapes and textures.As the forming tool can be used trowel, grout, hard brush.As part of the decoration surface Rotband - universal plaster with which you can create any texture.
IMPORTANT! layer of plaster to dry quickly, it is often necessary to ventilate the room.Dry plaster Rotband usually needed for 7 days (cement plaster, for comparison, the dry at least 8-10 days).By drying the layer it is desirable primed.
The same method is performed and plaster ceiling.
Plaster Rotband: VIDEO
Rotband (plaster): Price
Buy Rotband plaster can be packaged in three types of packages:
- 5 kg - 3.7 $ / y .;
- 10 kg - 6.8 $ / y .;
- 30 kg - from $ 12 / pack.
Wholesale material can be purchased at a discount.Saving leaves solid 30 kg of plaster on the wholesale market are sold for as low as $ 9.6 / Pack.
How much is the wizard?
The cost of a qualified professional
- in Moscow is 215 rubles. / M²;
- in Kiev is 40 UAH. / M².