- Technology laying tile
- procedure for laying tiles
- laying tile on the floor
- laying tile in the bathroom
- laying tile in the kitchen
- laying tile video tutorial
- $ Laying tiles: the price of services in Moscow and Kiev
Recent advances in technology construction materials offer many opportunities for personal involvement, and do a lot with their hands.In this respect, laying tile is no exception, but when used expensive tile such as eg ATEM, CERAMICA PARADYZ, REX, AZORI, CERPA, VIZAVI, MARAZZI, the involvement of professionals, nevertheless, is more appropriate.
Technology laying tile
Existing methods of tile are not numerous, but they are divided on the wall and floor.Wall styling methods:
- classic horizontal;
Floor installation methods
- patterns of tiles of different sizes.
Design stacking largely depends on the ceramic tiles and the room where it will be laid.It is
Procedure laying tile
Preparatory work: sizing and preparation of drawings to determine the number of tiles and supplies.It should be remembered that the removal of old tiles will cause an increase in the area, and plastering - to decrease.
Surface Preparation: In addition to clearing and leveling of surfaces is necessary to determine irregularities of the walls, floor and ceiling in order to know their rejection and to take into account when laying tiles.You should also check the strength of the surfaces;This is done by tapping.When laying on wooden wall they should be pre-coated metal mesh.
Facing the floor: it is possible to lay tiles and to evaluate the resulting visual pattern.When you mark a diagonal laying pre frieze, which would give the maximum number of whole tiles in the pattern.Tiles are laid on the guide cords and then placed, after 10-15 minutes after applying the adhesive to the surface.The width of the joints should not be more than 2 mm.Legal Code number check level.
Wall: her start when the floor is ready.Here, everything depends on the level of skill and method of laying, and the main problem may be caused by an uneven surface.
Grouting: pre seams must be cleaned of residual adhesive, and then, using a rubber trowel and grout joints to cover it.
3 There are plenty of other activities being done in some cases, such as: the organization of the drain in the bathroom, the tile surface coating with special protective structures and other.
laying tile on the floor
When laying tiles on the floor (woodenor concrete), the main requirement is the reliability and integrity of the floor covering.It should also be remembered that the floor tiles and the tiles on the wall - it's completely different tiles with different strength characteristics.In addition, options for laying tiles on the floor do not allow the voids under the tile, regardless of the type of premises - in the kitchen, bathroom, hallway, in the bathroom, etc.Laying tiles on the OSB, plywood or particle board is one option laying on the floor lined and fortified;but even in this case, you need to be sure that the ground under the additional coating remains reliable.
laying tile in the bathroom
Standard bathrooms important element is laying tile around the tub, as well as cutting holes for faucets and other sanitary ware and furniture elements of the room.Typically, the floor and bathroom walls are covered with tiles, at least - the ceiling.The bathroom is the correct isolation of the critical joints to prevent the ingress of moisture under the tile and its subsequent delamination.For this purpose it is necessary to use a high-quality grouts and carefully to protect the joints.
In cases when laying tiles produced in the drywall it is necessary to ensure reliable bonding with the surface.To do this, he drywall should be not only moisture resistant, but also resistant to vibration;and on top of it glued monofilament mesh plaster.This framework will provide the proper level of adhesion and hardness for wall tiles.Special difficulties in laying this not, as such walls are always very smooth, and thus laying can be made with their own hands.
laying tile in the kitchen
tile in the kitchen is also used for walls and floors, but common and easy apron in places where the wall may be subjected to undesirable influences.Also found the use of tiles for countertops, but it is the exception rather than the rule.
video tutorial below provide training video explains the entire process of laying tile (not only of ceramic) with the participation of professionals.Of course, with your hands you can do it if you have experience and the necessary tools.
$ Laying tiles: the price of services in Moscow and Kiev
The cost of laying the tiles depends on several factors, the most common of which are: the complexity of the surface to which the tile is laid, the presence ofoutdoor pipes and valves, the complexity of the figure, as well as how much tile itself.Minimum same price for 1 m² following:
- Moscow - from 600 rubles
- Kiev - from 30 hryvnia
course, more responsible and quality work can only be experienced craftsmen whose work is usually more expensive and,certainly better than any choices made by their own hands.