Drywall - a versatile material which when working indoors, you can make almost everything from the ceiling system, the new boxes for doors and false walls, decorative designs to complicated and functional partitions.
Installing drywall on the walls of the shed will not prevent any air conditioning, no TV (at fixing hefty interior elements to the walls of plasterboard additionally applied adhesive layer, or set another sheet of material).
Due frame mounting system, you can close the battery plasterboard, to build a new wall or her individual element (often the case - the installation of arches).
- One-level plasterboard
- How to connect the lighting under the drywall
- Installing drywall: VIDEO
- Installing drywall: PRICE
In this article we consider the principle of organizing a simple ceiling frame and plasterboard lining.One-level
Proper installation of drywall on the ceiling should start with installation starting Profile on the perimeter walls horizontally do
IMPORTANT! Plasterboard bends better cross than longitudinally.The weakness of the sheet as the basis for this method: fastening formed in this way, strengthen the rigidity of the structure.
In this example, plasterboard is used as a leveling inclines to eliminate the ceiling.
markings on the ceiling must correspond to the parameters used for the sheet of drywall.In an example taken as a basis sheet length of 2 500 mm.That is, the line should be drawn at a distance of 1 252 mm from the walls and each other (half sheet of drywall + 4 mm for the technical gaps).
Thus, bearing metal profiles will be held across the sheet of drywall at the middle and at the edges (in this example is considered a small room sanuzelnogo type).
Suspensions for support section is mounted on the ceiling for road marking.Clamps should be placed on a plane with a pitch of not more than 600 mm.
IMPORTANT! Connectors for load-bearing profiles should be positioned so that they do not come to the crossroads junction nodes and longitudinal carrier profile.
Suspensions are often fastened to the ceiling using anchor-wedges, you can also use anchor bolts (and especially if itis a floor slab with holes).
ceiling assembly process largely accelerate laser devices.The laser is mounted on the spacer on the level (about 3 mm above the starting profile).
Cut hangers best metal shears, focusing on the boundary of the beam. Then you can begin to install the support rails.
Support section inserted into the starting and self-tapping screws for metal fastened to the suspension.On each side of the suspension should be screwed into at least two screws.
IMPORTANT! When it comes to drywall ceiling canopy at a greater distance from the base of the ceiling, you need to install the control suspension.
After installing the guide profiles can proceed to the installation of longitudinal.The longitudinal profile should be installed at a shorter distance than the guide - in increments of no more than 400 mm so as not to cross the point of attachment of the support profile.
Because this length of sagging construction is impossible, because the profiles are fixed to each other by special fasteners - crab.
crab crab in the profiles are fixed with screws.
frame ready.Now you are ready to drywall.Tehnologiyaustanovki sheets of drywall provides a departure from the walls of 2 mm.
sheets are fixed with a shift of about 1200 mm, adding more to 2 mm mounting clearances.
Installing ceiling plasterboard over.With this system, you can close the pipe plasterboard or other communications that prevent the interior of the room.We also recommend to pay due attention to the design of the ceiling plasterboard.
Often even simple design, customers are asked to set a ceiling spot lighting (lamps for plasterboard - it is often the small lamp power up to 50 V).
How to connect the backlight under the drywall
to install fixtures, before installing drywall, you need to have a framework for the necessary electrocommunications.If you tinker with electrical wires you feel like, you can put the removable rechargeable lamps.
Rules drywall preparation for installation of lamps similar to how the hole is made under podrozetnik or outlet. about how to install the switch we have already mentioned: the wiring is applied to the point of attachment of the sheet of drywall with a special crown drill a hole in the drywall partitioning, connect the wires and install the device.With downlights - scheme of the same.
Installing drywall on the walls made on the same principle, and installation of plasterboard walls requires a more robust frame structure, and, optionally, - insulation.
IMPORTANT! to calculate all the necessary materials can be on the Internet: the network presented the program prompts you to enter only the surface area, and choose the type and kind of work.As a result, in just a few seconds you get your shopping list ready to organize any drywall constructions!
Installing drywall: VIDEO
Installing drywall: PRICE
guides for plasterboard:
Buy rails, and other components of the aluminum frame can be as low as $ 0.1 / piece.$ 1.2 / piece.The price can influence the material from which made the item, manufacturer of the goods, its parameters.
- in Moscow, ceiling work - from 280 rub. / M, wall works - from 190 rubles. / M², the device partition - from 300 rub. / M.
- in Kiev: ceiling work - from 65 UAH. / M², wall works - from 45 UAH. / M², the device partition - from 80 UAH. / M².