- Plastering drywall
- How are your hands plaster drywall, videos:
- plaster concrete walls
- plaster aerated concrete, videos:
- Plaster foam
- Plaster foamvideo:
- Plastered brick walls
some wonder "whether plastering drywall?".In this case, you can ask in reply, "but is it necessary?".Plasterboard paneling - an alternative alignment of the walls with plaster.That is applicable for roughing or finishing drywall or plaster.Which is better - drywall or plaster - a philosophical question.Each material has its advantages and disadvantages.
Plaster differs durability, impact resistance, low cost, a fortress.At the same time, the sediment at home it gives a crack at the greater curvature of the walls can be costly, lengthy process of plastering walls and dusty.
Saying that it is cheaper - plaster or drywall, plaster consumption must be considered: normal plaster cheaper drywall, leveling superkrivyh walls - plasterboard on the level of his or expensive.
Plasterboard good that its installation is faster, easier and cleaner, it has a good sound insulation between them and the wall can be laid insulation, from it you can create different shape design.However, it is less durable than plaster - it can not hang heavy objects, it takes valuable space in the room and just needs finishing.But it does not make it less popular.
If saying "drywall plaster" refers to decorative plaster on plasterboard, then this option is certainly applicable.Plaster plasterboard with their hands, like any plaster, begins with the preparation.
- Mounted drywall sheets are cleared of dust formed when they are installed.This can be done with a sponge or cloth, but it is much faster to use a vacuum cleaner.
- soil and shpatljujut seams and joints sheets of drywall and possible surface irregularities.
- special primer is applied, which will provide a good grip with the surface of the plaster.
- serves a decorative plaster walls plasterboard.
- Implemented finishing - plaster coating with paint, blue, paint, wax, etc.
How are your hands plaster drywall, videos:
plaster concrete walls
plaster concrete is chosen according to its kind.
plaster on aerated concrete chosen specialty.The main advantage of aerated concrete - its vapor permeability.Finishing material can either reinforce or neutralize it is a good property.Therefore plaster for aerated concrete must also be vapor permeable.It is not recommended to use polymer solutions.A conventional plaster walls of aerated concrete with time starts to fall behind.Interior plaster walls of aerated concrete, as well as foreign can be made with their own hands.Inside possible gypsum plaster walls - suitable for aerated concrete or plaster stucco Rotgips isohypses.
plaster concrete blocks - is desirable but not mandatory.Interior decoration can be carried out without plaster - hang wallpaper or tiles can be directly on aerated concrete.For aerated concrete absolutely fine no plaster on the outside - he can stand perfectly true, but for aesthetic reasons many still performed stucco on concrete.
Ceresit CT 24 (25 kg.) Plaster for aerated concrete - the price of 370 rubles in Moscow.
same plaster for aerated concrete - the price in Kiev - 56 hryvnia.
plaster aerated concrete, videos:
Plaster foam has similar features.Conventional cement-sand plaster is not suitable.Need a special lightweight plaster for foam blocks having waterproofing and vapor-permeable properties.Plaster foam blocks are often suitable for aerated concrete.Technology plaster concrete has some peculiarities.Before applying the plaster should be repaired all solution for masonry cavity foam.
External plaster walls of the foam blocks and plaster damp areas performed water-resistant mixtures for dry interior fit gypsum plaster.A layer of plaster on the outside has to be two times less plaster inside: stucco 5-10 mm thick, the inner -10-20 mm.
lightweight aggregate blocks are considered "bioblokami" and many of their properties are superior aerated concrete and foam concrete.Plaster aggregate concrete blocks inside the building can also be a basis of plaster, for example MP 75 / GF.
Interestingly, scratched texture of the concrete has found its application in a modern interior: there is a special decorative plaster under the concrete.Plaster for concrete used in decoration of the walls in the style of minimalism, hi-tech, etc.One such plasters - decorative plaster with betonnoyteksturoy «Kale» Betonart.
the prevalence EIFS facades, increasingly used plaster on the foam and similar heaters.Plaster of expanded polystyrene commonly used mineral, less acrylic.The most commonly used for plaster or stucco Penoplex foam - this is an ordinary cement-sand mortar.
Plasterer polystyrene with their hands need to be aware of some features.Preparing for plastering would be that you need to properly glue heater.The foam must be well secured, the surface must be flat, proven by the level where you have to eliminate the irregularities - floated float.Plaster is mixed creamy consistency.
Plastering of walls begins with the fact that the reinforcing mesh PVC foam glued to the plaster.The mesh is pressed against the plate and its upper edge is greased plaster with a spatula.Grid greased from the top down, her pieces overlap overlap.Application of the first layer of plaster should be fine.Then this layer is ground spreader to obtain a flat surface.After drying, this layer is applied and erased another.If the surface roughness is then, for example a thin layer of the third equalizing.After drying, the plaster can begin to fine finish - decorative plaster applied, for example, lamb or pitted.
plaster foam, videos:
Plastered brick walls
plaster brickwork - finishing of the usual base.Plaster walls of sand-lime brick must be made taking into account the fact that it strongly absorbs moisture.
for better adhesion of the solution to the brickwork, the wall can be primed.Fresh masonry is not plastered - it should hold out to draft.
apply different plasters, plaster and brick can cement-sand mortar, which can be cooked with his own hands.Plaster on a brick is performed by standard techniques.Walls are prepared, cleaned, embroidered laying seams, do a notch.Then a solution of the level exhibited beacons.Prior to plaster the walls should be well moistened with water.On the sand-lime brick, always apply the first layer - obryzg.It is a liquid solution that is a thin layer using a bucket pounces on the wall.After it dries bucket snaps thicker base layer - the soil, if necessary, after drying, apply another layer of soil.When the desired thickness is achieved, the bottom-up rule is cut once a solution and level the surface.Finish coat with a thin layer is applied over the dried soil with a spatula and overwritten.
The average thickness of the plaster according to the Building Regulations may be 15 mm - an improved plaster.High plaster is 20 mm, there is a cover requiring a greater thickness of the plaster, but the masonry of 15-20 mm is sufficient.
Plastered brick walls, the price in Kiev - from 60 hryvnia per square meter in Moscow - from 300 rubles per square meter, depending on the mixture, coating thickness, etc.
plastered brickwork simulates decorative plaster under a brick.It is used both in the interior and exterior design.