comfort, environmental friendliness, durability, different frame bath, which is build from a bar is always possible with the assistance of experienced professionals, either alone.
- rules of selection of wood
- Sort wood
- Log buildings baths of corrugated timber
- Why profiled beam?
- Availability fixing elements
- Heat Shrinkage
- Log buildings baths from a bar with your hands
- End notching (slots)
- foundation waterproofing layer
- Mortgage bar
- Subsequent layers
- Windows, doors after the construction of buildings
- device openings bath
- «Wintering" log
- konopatki log
- Log buildings baths from a bar with his hands video
- $ Log buildings baths of timber price
Strength, durabilitybath certainly depends on the quality index wood chosen, properly installed.However, the benefits of wooden baths collected from log obvious:
- simple stacking wood (compared with logs);
- minimal shrinkage - about 6-10sm;
- reasonable price.
If we consider the log-bath
rules of selection of wood
Here are the basic rules, following which you will be able to procure high-quality wood, and build an exclusive srubs guaranteed durability:
- best time of harvesting wood: the period December-March;
- felled timber is cleaned of twigs, bark, leaving only the ends of the strip width 10-15cm in order to avoid cracking;
- after sawing wood give the "lie down" 30 days;
- logs are stored in neat stacks or batches.Distances between the logs themselves - 5cm between ryadami- 10cm from the ground - up to 20cm.
not possible to harvest timber on their own, planning to build a steam bath from a bar? Then be sorted and carefully selected bars purchased.
- deep, resinous fracture - "pockets" indicate the possibility of a rapid decay of wood;
- «blue», which spots appear on the surface bleed timber, said about the process of decay (see photo);
- traces of wood borers - beetles and other insects - a sign of low-quality wood;
- curved surface is not acceptable when laying the boards.Although sawn timber curve, it is possible to apply it for a different purpose.
IMPORTANT! Each timber should be different dry structure, with no signs of mold defeat.
Experts recommend for standard building steam rooms with log beams used, the cross section of which is 150h150mm.Danae thickness is considered sufficient for year-round type baths.
built baths can be further decorated with various finishes, elements.And you can leave the building without further processing of the outer surface of the surfacing materials, just revealing the wooden structure preservative paint type.
Log buildings baths of corrugated timber
Vozvedeniebani with easy shaped timber is the most popular way of building such structures.
Viewed shaped beam wizard allows you to quickly build a bathhouse, characterized:
- attractive exterior;
- lack of need to perform subsequent inner vernal finishes;
- correct form;
- high rate of thermal conductivity, sound insulation;
- environmental friendliness.
Why profiled beam?
Featured shaped timber - friendly building material, which guarantees the efficiency of construction, durability, attractiveness.
Availability fixing elements
manufacturing techniques considered profiled timber means giving the material a smooth surface by careful sanding edges, the correct form.Also, each timber after the preparation has elements such as convenient mounting stud / slot.
so further build the whole structure is carried out quickly enough without additional gluing materials, which saves labor and costs.
percentage shrinkage baths, built of trained craftsmen shaped timber is 3.2 ... 4.5% is lower than the shrinkage of a log of wood.
Compare shaped timber with a standard log showed that beams having a section in 15h16sm thermal conductivity equal to the logs with a diameter of up to 24cm.
considered to manufacture shaped timber made of well dried wood known softwood due to low exposure to the resin material rotting processes.
Srubparilki profiled type of timber is subjected to less stress cracking when originally purchased a high-quality wood, or it is properly harvested.
Log buildings baths from a bar with your hands
We decided to build the steam room of timber on their own? Let us help individual recommendations!
Initially, we note that from the timber to collect the steam room easier and faster than building it from the logs.
Another advantage - ease of assembly.For example, the profiled bars are going as a designer thanks to the ready-made grooves.
End notching (slots)
There are many types of cuttings.
easiest - L-shaped, called by experts "in the leg."This is easily done yourself vrubka traditional chainsaw.
originally made template according to which the later just to cut notching.First, perform cross cuts, and then - bevels.This is more comfortable.
IMPORTANT!Pick boards strictly equal length.
first advantage - the ability to build the structure erected directly on the masters of the foundation, which is not possible with a log of wood.
When Laid-laying timber should be performed waterproofing.The layer of material is applied between the foundation and prepared themselves sorted bars.
the picture - diagram of a waterproofing layer.It includes bitumen roofing.Also used antiseptic.The sequence is as follows:
- on the foundation is applied molten bitumen;
- top of bitumen - a layer of roofing material;
- layer of bitumen;
- layer of roofing material;
- mortgage timber.
second layer of bitumen applied only after setting the previous one.A mortgage pre-processed timber antiseptic composition from coming into contact with Ruberoid sheet later.
IMPORTANT! first ventsevoy timber taken 200h200mm size.
log structure after the formation of the foundation, involves laying his hands ventsevogo first layer.
can see that the slats, previously spread out on waterproofing, serve as the basis for mortgage timber.Reiki should be chosen 15mm thick and pre-treat with antiseptic.
These slats increase the operational life of bars, lifting them above the foundation and excluding rot.Form a mounting space is filled with foam.It turns out a kind of vented cushion.
IMPORTANT!Hooking first ventsevoy number should not be!With the construction of the whole structure it is securely "pinned" her weight.And if you need to restore it, the procedure is simple to implement.
horizontal stacking verified standard, building level.
IMPORTANT!Bars second, subsequent layers are taken 150h150mm sizes.
The first crown was originally laid sealing material: natural moss, common hemp, jute roll.Seal splits evenly over the surface, with the release out to 10cm (exception - jute).
After laying the wreath II, fasten it with pins or pegs, inserting them into the pre-drilled holes and unloading.Note that the drilled holes are undesirable timber after laying - on the drill will be laid to wind seal.
IMPORTANT! After laying wreaths all scheduled last 2 ventsevyh series does not hold together!After shrinkage of the structure, the installation required ceiling beams, they need to be removed.
baths Building frame independently, remember to openings projected for windows and doors.They can equip with the direct construction or after.
Windows, doors after the construction of buildings
most time consuming is the insertion openings designs after the construction of your bath.Here we have to make a special notching, as shown in the diagram.
device openings bath
much easier to equip the openings of windows, doors with direct construction.During the construction mezhbrusnye leave gaps which subsequently inserted Lutkov.This option allows you to cut out the openings required size.
IMPORTANT! install themselves windows, doors should be erected only after shrinkage bath - about six months.Mezhventsevoy seal settles himself usohnet bar.The construction will shrink about 10cm.Therefore, embedded windows, doors skewed.
After the erection of crowns should be ready to cover the frame board with a thickness of 50mm.Additionally, you can put any roofing slate and leave the structure of the "winter" in the 6-7mesyatsev.
If you used as a seal moss ordinary tow, after "hibernation" log required to produce it konopatku.
The procedure is quite simple.To carry out its help ordinary hammer and a special "konopatka" (see. Photo).
oakum, moss, fold and push flagellum konopatki with a hammer between the boards, ensuring a smooth formation of the joint.
you used jute?Then carry konopatku not need!
Log buildings baths from a bar with your hands
video where you can watch the video to visually assess the complexity of the construction of the baths using timber.
$ Log buildings baths of timber price
Log buildings baths, which is planned to build from the beam will vary in value.The price of such buildings will certainly depend on the desired size of the material, the design scale, complexity, climatic conditions, etc..
But the minimum, standard costs to date are as follows:
- Kiev - from 1600grn per 1m2;
- Moscow - from 3500rub of 1m2.