the basis of these Display cabinets and bookcases put common core body member.If desired, handyman can decorate one of the rooms of the apartment liked a piece of furniture.
Either of the two items under consideration is consistent with modern trends in furniture production.The combination of colors of natural wood and details with a black finish characteristic of their design.Details of ash carpentry plate beautifully framed by dark shelves and give product noble traits.Such a cabinet largely determines the character of the interior.
more simple product - a bookcase, its appearance - quite strict.This impression is reinforced intermediate shelf made of natural wood.
Design Display cabinets in comparison with the book - is more complicated, because it provides some additional elements - three drawers, two glass doors at the top of the cabinet, a triangular shaped cornice.In addition, there will have to be mounted lighting with halogen lamps and place of the eaves down transformer.
Showcase Display cabinets of the two glass doors closed.In the lower part - three large drawers with wooden front panels.
for design bookcase with details and light wood characterized by stringent clean lines.
Installing glass doors
For light glass doors (as in this case) can take a screw clamp loop.Larger doors should hang on hinges screwed.To do this, the glass is necessary to drill holes (better - in the glass studio) for fixing the hinges.
Blockboard best to cut out hand-held circular saw with a rip fence or the guide rail.
The side walls are drilled at several levels of the four holes for the shelf supports.Electric drill is mounted on the drilling tool.
cabinet design showcases
side walls are glued two joiner plates through the bars section 20 × 20 mm.If desired, instead of ash elements decoration can be used beech or pine.
Each of the side walls of the bearing structure of the basic element consists of two plates of veneered cabinet (or DSP) with glued between the bars section 20 × 20 mm.Inner plate sidewalls 10 mm narrower outer, whereby the rear side is formed a kind of seam, allowing to establish a rear wall flush with the back edges of the outer panels of the side walls.Face edge of the walls closed casing, mounting of which is as follows.To the back of the casing stick bar, which is then glued between two plates forming side walls.Attach trim until trim elements of the case.
The housing cover is attached on top of the screws (three screws on each side).The holes have to be drilled for screws strictly in the middle of each edge of the inner side walls of the two-layer boards.
Before assembling the cabinet, all the parts of his body, first trim black stain using a broad brush, then sanded, treated with primer and finally varnished.
Base cabinet collected from the three parts that zapilivajut "into their heads" and attract the bottom screws.The bottom is attached to the top side support bars.The rear wall is inserted into the "rebate" and secure the screws.
vertical frames are mounted after finishing.Causing the adhesive on the contacting surfaces, insert bars attached to the back of the architraves, between the plates of the side walls and pull together these elements large clamps.
Wooden shelf separates the top, showcases the cabinet from the bottom drawer.This shelf is attached to secretly screwed her bottom support bars.The drawers are moved along the side walls attached to the telescopic guide.
large drawer cabinet display cases.Narrow strips of light wood, decorated with furniture wax or clear varnish, effectively contrasted with the dark front panels of drawers.
to display cases (or book) looked really nice, to properly pick up the necessary materials for its production.In this case, the side walls of the enclosure are made of blockboard 19 mm thick, veneered.From the same material fabricated box lid and body drawers.
all facial parts (panel drawers, trim and triangular eaves), as well as the bottom shelf and cuts out of the ash blockboard 18 mm thick.For the back wall is quite good plywood 10 mm thick.
Glass doors and shelves (glass thickness - 6 mm) is better to cut out the glass workshop.Here grind their edges.
Accessories: 6 telescopic rails for drawers;4 loops for attaching glass doors.
Before finishing wardrobe collected to assess the correctness of fitting components, and then dismantled.All items of joinery boards and front panels of drawers stained black stained, sanded, primed and coated with transparent matte varnish.The final assembly of the cabinet is performed after finishing his elements.
Finishing natural wood
Instead of clear lacquer wooden parts can be covered with liquid furniture wax, which is applied with a brush and rubbing a swab.