frame house is getting more and more popular due to the advantageous combination of quality, construction time and cost.
- Construction stages
- Step 1: Select the site
- Step 2. Bookmark a foundation base
- How to build a frame house video
- assembly frame house
- assembly frame houses video
- $ Building a frame house, the price works
In the considered design bearing basis - this frame, assembled from wooden posts, beams, studs, collar beams.Mesh base is calculated on the durability and reliability of retention walls, roofs, floors.
If count rate required for such construction materials and labor costs, then we can safely say that the frame houses are the most economical among the other types of buildings.
Another important advantage of submitted designs is the relative simplicity of construction, which allows the inhabitant to build a house himself.
Without the involvement of specialized equipment, without th
Step 1: Select the site
Of course, if the site you already have, then choose it is not necessary.If you buy a place for the construction of a new home you're just going, keep in mind these points:
- area should be on a hill in a place where a little moisture because of exposure to wood decay at high humidity;
- note the passage of the level of groundwater.High of occurrence causes instability of the soil, which may affect the stability of the foundation;
- the presence at the site of the old trees with extensive root system, take care of their complete removal, to ensure the stability of the foundation of the house.
Step 2. Bookmark a foundation base
Before the construction of the foundation bases should consider the type of soil, the depth of his seasonal freezing level passing groundwater.
example, nepuchinistye or heaving soils allow the use of a common band type foundation without the need for deepening the base below the freezing ground.
Important! Features type of soil, the rate of freezing the passage of groundwater level are taken into account at the stage of the project, whose presence is a must when building a house.
usually frame houses built one- or two-storey, the construction itself is lightweight, so it is often the foundations for such buildings erected belt type in the following sequence:
- done counting the future foundation;
- dug a trench;
- settling waterproofing, drainage;
- settling formwork;
- carried reinforcement;
- poured concrete.
How to build a frame house.Video
top of the prepared foundation laid waterproofing layer on top - soaked in antiseptic compositions wooden beams.To avoid skewing the corners checked level.The finished design is fixed with anchor bolts.
subfloor is made from not edging boards.First stacked logs, then Insulating material further - board.The overlap can be filled with concrete solution.
correctly perform equipping the sub-floor in a newly built frame house help video:
carry out all the activities on the construction of the structure under consideration is not difficult to performing proposed by professional carpenters instructions.
assembly frame house
these instructions will help to fulfill the main part of the construction of a frame house - carcass.
Important!According design solutions applied to the prepared floor markings future walls.Then, from purchased materials formed by tying himself frame.
To form the frame basis is recommended to use a trained, well-dried and treated lumber with the size of the cross section of 100x100 cm, 150x150 mm.In the corner transitions beams connected way "tongue and groove".Fixing timber is carried out with wooden pins.
Photo 3 - Driving build walls
Framework design is performed using the upper strapping, horizontal beams, uprights with the size of the cross section 100h45 cm, 100x100 cm, 100x150 cm, 150x150 cm.
the prepared floor going constructionfuture walls.Pre-beams, boards are cut according to the marked on the floor size.
Important! After waistrail packed and assembled construction walls, framed bases can be attached to the binder boards, fixing them above the top harness.
Assembly and installation of partition walls made in a certain order in advance.The order in each case may be different, but there is one rule - the first rise and set "long" wall.
After installation, each outer wall mount time mowing.As the assembly of the outer walls of time mowing removed.The corners of the walls should be to shoot down three nails.
Important! Bottom rail must exactly repeat design drawings.The lower and upper harness formed by two planks in the two layers.Assembling the roof is carried out after the installation of external and internal partition walls.
roof system is assembled from trained ceiling beams, edging boards.
After the formation of the base frame are carried out insulation work performed exterior cladding selected materials and interior trim structure.
assembly frame houses video
This video describes in detail the rules for the frame walls.You can clearly see what is best to choose the size of timber, which should be used in a manner binding beams, columns, and how to carry out the whole process, avoiding the unwanted mistakes.
$ assembly of a frame house.Price works
cost build frame houses determined by the complexity of the project.Standard structure of this type going professional carpenters.
price of the work is usually equal to the cost of spent materials.For example, if the construction of 1 m2 frame house is required to purchase materials in the amount of $ 150, then work on this volume is estimated at $ 150.