few years ago was considered a real oven relic of the past, fireplaces were a rarity, and the interior was made more contemporary as possible.Now, when the style of the country took the lead in interior design, and one of fashion trends has become a mixture of styles, stoves and fireplaces began their triumphant return to homes and apartments.
- Plastering furnace begins with the preparation.
- Preparing for plastering
- plaster stone stucco
- Decorative plaster ovens, video
fashion trends of interior design allow you to create simulation of furnaces and fireplaces false.
However, those who have the opportunity, try to equip your home of this Russian stove or fireplace.This is troublesome, but worth zanyatie.Ochagu need special finishing, including special plaster ovens.
mixture of plaster furnaces must be heat-resistant.The material is part of the plaster should be able to some expansion when heated, so that when the plaster has not gone cracks.Decorative plaster for stoves an
plaster for the Russian stove or fireplace can be made with their own hands.
Plastering furnace begins with the preparation.
Preparing for plastering
Plaster is not only applied to the folded oven.By the time of plastering oven should stand for some time, preferably at least a month to properly dry masonry oven does not give sediment and went crack.Well dried out wall of the furnace should be cleaned from dust, clay solution which may crumble.To this end, in addition to the entire surface should be clean and deepen the masonry joints.
next stage of training - reinforcement.To the furnace wall using dowels attached metal mesh or nails pulled furnace wire, making the surface more rough and increase grip solution masonry.Before applying the plaster to heat the oven should be well and moisten the wall.The surface should be hot and humid.
There are many recipes for the finishing plaster lesions.Plastering the walls of the furnace is carried out by applying three layers of spray, primer and finish coat.The total thickness of the plaster may be up to 20 mm, but the optimum thickness - 10 mm.Plasters for furnaces often prepared in clay or lime with the addition of reinforcing components.In all blends components are mixed first in a dry form and then added to the clay, lime milk or water.
- Clay: slaked lime: sand = 1: 1: 2 - mixed together, water is added.
- Clay cement: sand = 1: 1: 2.
- gypsum sand: slaked lime = 1: 1: 2 - the solution should be prepared in small portions and then used - plaster hardens quickly.
In all solutions added to about one-tenth of the reinforcing fiber - asbestos, glass fibers, or straw.Asbestos - the most common additive in plaster furnace, but it is harmful to health.
During the plaster may crack, which immediately carefully embroidered and are sealed with a solution.
If earlier solution in any case, prepared by hand, but today to buy plaster for stoves - no problem.Heat-resistant mixture for plastering oven is, for example, called the Stove.
furnace can be painted, but not oil paint, or use artificial stone cladding, wild stone or Roman stone.The oven can be plastered under a stone in finishing the fireplace can be used decorative plaster, which includes stone chippings.
There plaster, allowing to simulate a smooth stone coating, such as "The Stone Flower" - plaster quite popular.Plaster under a rock with their hands can be performed using the technique of rust.
Decorative plaster ovens, video
(methods suitable for different surfaces, including stoves and fireplaces):