for interior slopes today use three basic methods: drywall, plastic and plaster.Drywall without problems creates a smooth surface - easy to work with during the subsequent finishing.Plastic does not require any further operations - just install it and ready to smooth glossy slope.These finishes are popular due to the rapidity of work, but the quality of finish plaster slopes - the best option.
plaster slopes of windows takes longer, the occupation is a dusty, but the finishing layer is formed by abutting the wall, becoming a part of it (which does not happen with plasterboard and plastic).
Although three options, plaster is more susceptible to cracking and require additional insulation.
- Plaster slopes with their own hands
- Plaster slopes with their own hands, videos:
- Plastering corners, videos:
- Plastering slopes, videos:
Plaster window slopes, as well, and door slopes plaster performedin several stages.However, remember that the finish slopes plaster is performed only after
Plaster slopes with their own hands
- Like plastering walls, plaster slopes starts with surface preparation.As already mentioned, the walls have to be plastered.After the change of windows is not necessary to delay the finishing slopes.Polyurethane foam under the influence of natural factors susceptible to fracture, so it is desirable to promptly plastered inner and outer slopes.The very preparation is cleansed from dirt and dust, protruding from the masonry mortar.Stitches embroidered masonry bit.
- plaster repose their own hands can be performed using various supporting tools.
Plaster slopes with their own hands, videos:
- in the inner corner of the slope (near the window) at the level set lighthouse: solution sits on metal profile desired length.
- to limit the outer corner of the slope set rule or wooden rake.Typically the desired length is pressed against the edge of the wall adjacent to the slope.From the walls of his need to consolidate multiple clips using dowels and screws bolted to the wall.Laying the slope must not peek out from behind the rules.The verticality is checked using a level.The same principle is prepared upper slope, which actually begins and plastering.
- Before applying the plaster, make sure that the beacons and rules are properly installed.Plastering slopes, as well as walls, it has three layers: a thin scratch coat, the main ground and small - nakryvku is only 2 mm thick.When the main plaster sketched and some stood, she shrinks from the bottom up rule or spreader.
- later, when the plaster has dried up a bit, gently removed and the solution usually overwritten remaining portions performed stucco corners.Plaster wall corners - husk and Usenkov - can be carried out when the plaster walls and slopes have dried up.Then it will make it much easier.Plastering corners performed in the same solution with the help of plaster trowel or trowel.As the bulk of the plaster in the corners leveled movements from the bottom upwards and outwards.Plaster near the angle must form the plaster walls, flat surface.
- Dried plaster primed and painted shpatlyuetsya.
Plastering corners, videos:
To undertake such a task, as plastering slopes possible if there is some experience in the field of construction and repair.If not, and the idea of plastering the walls and corners have only theoretical (construction of articles) and a bit of visual (of video clips), it is better to entrust this work to professionals.He will pick up a good mixture of qualitatively perform plastering slopes and will bring them to the ready state, doing the finishing.
- Plastering slopes, the price in Moscow - from 300 rubles per meter, excluding materials.
- Plastering slopes, the price in Kiev - 140-200 hryvnia per meter with light materials.
cost of subsequent fillings slopes is in the same range, maybe slightly below.These rates offer construction companies, proven and invest in advertising.Looking how much it costs the same service at many private masters, you can find prices two times cheaper, especially in the periphery.
Plastering slopes, videos: