Laying traditional ceramic tile is a kind of ritual, through the home gets its final appearance and completes the end of construction of any house.
- Laying tiles: a video guide of the company TONDACH
- Technology laying tile laying
- metal: video installation manual roof system
- $ Stacking metal: the price in Moscow and Kiev
To understand the beauty and grandeur of natural tile in its traditional version is enough to see several catalogs of companies specializing in roofing materials and tiles in particular (TONDACH, CREATON, KORAMIK, NELSKAMP, METROTILE, EVERTILE, RATHSCHECK, RUUKKI).
If the planned laying of shingles, it is quite possible to manage local producers and suppliers, as it will be much cheaper.
Laying tiles: a video guide of the company TONDACH
Proprietary video presentations and tutorials are useful, becausereported many details about specific materials and their use.
Technology laying tile
Any instruction from the manufacturer of shingles provide enough detailed guidance on the installation of tile - ceramic, cement and sand, of polymer, bitumen or composite - that any owner can inspire and tryto do everything with your hands, but do not be deceived on this score. No scheme can not replace the skills, expertise and materials offered by professionals .
rules, which made laying shingles or classical clay differ in the details, so you should always consult the manufacturer's documentation.
In general, the right styling, more precisely, its process is as follows:
Preparation rafters and sheathing installation: The basis of the roof should be flat, and the step sheathing must match the size of the sheet or tile step, which is valid for softroof.Moreover, in the crate affects form tiles;For example, imbrex fit entirely on a solid crate.
When installing a warm roof insulation regulations require the use of a variety of insulating materials, which are stacked in accordance with the manufacturer's instructions.
directly laying tile made in three or four rows at a time, thus it is necessary to conduct laying symmetrically on the two ramps to evenly distribute the load on the entire roof structure.If an odd number of series started the whole tiles, then in an even - and half way across the surface of the roof.
point of contact with chimneys or roof window openings are mounted separately, as a rule, elements of the roof in such places are set up to the start of the installation of tiles.In most cases, the so-called spread collars made of galvanized steel, and then filled with a cement-sand mortar.
Some technologies laying tile provides for the use of ventilation tiles.These are special elements, which organize the natural ventilation of the roof and the attic.
Stacking metal: video installation manual roof system
covered all the nuances from the transport, storage and finishing installation of the roof.As part of the organization Roofing such as, for example, soft tile laying and preparation of the roof can be borrowed much from this guide.
$ Stacking metal: the price in Moscow and Kiev
The cost of laying 1 m metal (regardless of the sheet thickness - 0.4 to 07 mm) in the two capitals around the following:
- Kiev - from 70 hryvnia;
- Moscow - from 300 rubles.
Note: the price includes a stacking of metal and roof bars.