Installation of windows in a wooden house, as well as installation of other structures complicates noticeable mobility at home - at least another 5 years a new home, especially if it was built of timber, will change (so, for example, can be severeShrinkage walls).
- Technology installation of wooden windows in a wooden house
- installation of plastic windows in the wooden house
- Installation of windows in a wooden house with his own hands.Required tools and materials
- installation of plastic windows in the wooden house with his own hands.VIDEO
- $ cost of work
Technology installation of wooden windows in a wooden house
technological installation of wooden windows in a wooden house on the installation of window systems in the panel or brick house is no different. almost the only caveat - the box must be installed in a special wooden box, which is installed first.This box is also called "obsadoy" or "okosyachkoy."The average width of the box is 40-60 mm.
Here are some technolo
- window aperture thus should be wider than the box for 2-4 cm and 6-8 cm higher, the opening angle must be straight and the diagonal of the box should not differ by more than 1 cm.
- For use laser level.
- If the opening in the wall is longer than expected, the installation will have to expend more insulating material.
- All surfaces of the opening must be smooth and without recesses, the lower part of the opening should be smooth and flat.
- box fixed with screws to the wall, then you can begin the installation of the finished window.
- removing the sash frame to mount the box, fastening these elements windowing system using screws.
- After installation, you can hang a window sash and cut insulation (laid in the gap between the wall and the box).As the insulation is best to use mineral wool.
- last stage - to close the seams with foam, wait up to 3 hours (depending on the type of foam and the manufacturer, setting time and performance may differ expanding foam), and then trim the excess.
wood shrinkage is due to the gradual evaporation of the moisture contained therein.Because the boards and lose volume.In some cases, only the first year of the house can shrink 2-3 cm!By the way, in spite of the fact that after 7 years, the maximum take its home "final form", minor changes are still possible: because of the change in temperature throughout the year changes, or humidity level.
Because the question of how to behave in a strong plastic frame in the face of such a significant mobility remains relevant today.
advantage of wooden windows is obvious: wood frame and window boxes will behave in the same way as the material of the whole house, but to provide more heat and noise insulation is installed plastic windows.
installation of plastic windows in the wooden house
installation of plastic windows in the wooden house - a relatively recent development, too.Since the fashion to build houses of log or timber in the city or her, and then mount them in modern plastic window systems appeared a maximum of 15 years ago.
Thanks to modern developments plastic window may look a hair's breadth as wood.But whether it can have the same properties?
installation of plastic windows made of this algorithm:
window aperture prepared for installation: clean, check the level and made obsadu.
Obsada made thus:
- at the ends of the window openings cut out special comb - "spike" 30 * 30 mm;
- insulated stud using jute (hemp roll);
- for insulated comb mounted obsadu - bar 100 * 150 mm with propylene middle of the beam groove 50 * 50 mm.a bar also called the "gun carriage".
Obsadu mounted on three sides, while the comb are made solely on the vertical plane.Home obsady functional task - to restrain the maximum horizontal displacement of the log home with one hand, while ensuring the free sliding window is already mounted on a vertical surface.
between the wall and the upper horizontal obsady leave a gap of 60-80 mm.After installation of the windows of his insulated and filled with foam
Now that the window aperture is ready, it mounted a plastic box for installation using special fastening anchor plates.
After installing plastic window align in all planes, using a level, leaving all sides technological gaps.
anchor plate is fixed to obsade.It is important that at the same time retaining screws master deepened only obsadu without screwing them while in the wall of the house!Otherwise, the mobility of the window system, the importance of which we have spoken above, can be forgotten.
gaps are filled with foam.
Outside set PSUL (self-sealing vapor barrier tape).Also set trims to hide all the bumps and seams.
In this installation of windows in a wooden house can be considered complete.The case for small: to mount the window sill and the tide.
Installation of windows in a wooden house with his own hands.Required tools and materials
installation of PVC windows with their hands in a wooden house is impossible without:
- level (the desired length of 60 cm, shorter can provide error);
- punch or a drill with a percussion mechanism;
- grinders and jigsaw to form a tide window and the window sill;
- screwdriver for fixing mounting plates, as well as low tide;
- set of hex keys (used for adjusting the window after installation).
Materials for the installation of PVC windows with their hands:
- foam (if the window is the standard size, can be enough and one bottle of 750 ml);
- screws with brown 21h3,9 mm - at least 15 pcs .;
- wooden blocks 40 * 40 * 40 mm (used to align the plastic window horizontally);
- dowel-nails (for quick installation) - not less than 10 pcs .;
- foam (used when installing the sill) - enough for a sheet of 50-70 cm², when the sheet thickness of 20-30 mm.
When choosing PVC profile guided product brands REHAU and BRUGMANN (Germany), PROPLEX (Austria), Brilliant (Ukraine), Artec (Germany), WINHOUSE (Turkey).
IMPORTANT! Observe ambient temperature when using foam.
Modern technologies allow the use of the material and at zero temperature, but most of the products in this category are designed to operate at a temperature less than 15 ° C.Choosing assembly foam for sealing seams and joints, note the amount of cylinders, the volume expansion of the foam after spraying and a method of spraying the material - some manufacturers are making a special plastic nozzle cylinders, while the other should not buy a special gun.
Among the proven brands:
Soudal (Belgium), Krimelte (Estonia), Element (Russia), Pippo (Russia) and others.
installation of plastic windows in the wooden house with his own hands.VIDEO
$ cost of work
- Kiev 500-800 UAH.PC.
- Moscow: 2 500-3 500 rubles.PC.