furniture, in particular cabinets - that is what is never enough.Especially this problem is familiar to women, who usually have nothing to wear and no place to put it.Drywall - is not only an alternative to plaster the walls, but also an excellent material for making furniture.
own hands, you can create an exclusive wardrobe of plasterboard - realize any design idea and at the same time save money.
- General Principles manufacture cabinets of GCR
- built-in closet plasterboard
- Variants internal filling wardrobe: Video
- Corner cabinet
- Niches and shelves
- Wardrobe Plasterboard: Video
General Principles manufacture cabinets of GCR
There are general principles for the manufacture of cabinets of GCR or essentially complex baskets of plasterboard.
How to build a drawing
first selected location of the cabinet, a detailed project not only by measuring the overall dimensions, but also with the size of even small details.Determined by the thickness of shelves, drawers and hanging p
idea to create a piece of furniture, you can search the catalogs of furniture or among the photos of finished drywall constructions.
How to markup
on the ground (floor, ceiling, walls) are marked by a line frame.This may be useful level, a plumb line, paint line, pencil, square.
If lights are planned, the marking is done to them under the mounting frame, and during its installation is performed wiring harness.
on marked lines on the floor and the ceiling using dowels, nails fasten profile rails, pre-glued rubber insulated from the side which is adjacent to the base.
then inserted into the guide profile rack profile.By the walls of the profile must be secured by a hangers, together they are fixed with special screws.For rigidity between racks mounted transverse profile strips.The smaller the spacing between the profiles, the stronger the structure.
frame can be made of wood - in this performance, he will be much stronger.However tree - a moody material more difficult to install.Shrinkage wooden slats mercilessly spoil cabinet.If the mass of things that will be in the closet is large, better still a tree, but well dried.
Plasterboard attached to the frame in accordance with the usual rules cladding plasterboard.Depending on the planned loading shelves are made of one or two layers of drywall.
Select the type of plasterboard depends on the conditions of the room in which the cabinet will stand.Do not forget staggered fastening sheets (mismatch horizontal seams), chamfer edges nezavodskih etc.
finishing cabinet is the same technology drywall work: sizing dividing strip joints planes putty joints with reinforcing mesh or tape, sticking plaster on the perforated corners, coat the entire surface finishing time to taste.
How to Hang cabinet
may want to mount plasterboard hanging closet (for example in a closet for household).In theory, and in practice it is possible, but is it necessary?In order to use the weight of the structure and capacities of the cabinet should be minimal.
Cases of plasterboard should be mounted on any base (floor, wall), they are usually embedded in the existing niches and corners.
Therefore, if you want to hang a massive separate case, contact the drywall - the wrong address.Small shelves of plasterboard with their hands to hang, securing their frame using the dowel-nails in the wall, just like any other drywall construction.
Wardrobe plasterboard may be different: from shelves to wardrobe.
built-in closet plasterboard
Wardrobe proves to be not only the order in a furniture store, but also to make their own hands Plasterboard.The advantage of drywall that fast and cheap, you can create an entire wardrobe, which can hide the bulk of things.
Installation of the cabinet is in accordance with the above procedure.Finishing internal surfaces shall be resistant and brand.
After finishing cabinet finished it is time for the installation of furniture fittings and finishing of other materials such as MDF.Plan it is necessary to advance, but buying, as well as ordering the sliding system after installation and trim frame - not to be mistaken in size.
mount shelves, pipe hangers, boxes and other elements of the cabinet is the same as in ordinary wardrobe. But we should not forget that all parts must be mounted in places where there are under the skin profile.
The last thing in the ceiling and floor mounted profile, which is mounted sliding system.The main thing to consider when building such a volume element of the interior - the fortress construction.And above all, it will depend on the quality of the installation frame, degree of cross-gain profile sections, step counters, etc.
Variants internal filling wardrobe: Video
advantage of every corner of the cabinet, whether it is closet in the hall for clothes or a bookcase in the living room - it is mounted to the two walls.Achieved not only saves material, but also the design gets even more stable, especially if the cabinet from floor to ceiling.
Niches and shelves
Plenty of room for creativity in this area is not limited to practically nothing.These improvised cabinets do not require additional parts, fasteners and other furniture - all made of drywall.
-through closet with shelves of plasterboard can serve as a boundary between two zones in the room without cluttering it or preventing light.
Niches and shelves in the wall of plasterboard versatile - can be designed for household appliances, library or decor.
All cabinets made of plasterboard, as part of the walls and partitions, you need to plan and mount during repairs.Profitably build such furniture yourself (if you have this ability) as the cost of such work under the order a lot.
For example, one of the sites of construction companies indicate that manufacture and assemble a wardrobe of plasterboard, the price - 5000 rubles per meter.
Wardrobe Plasterboard: Video