mirrored ceiling with his hands to perform is not as difficult as it might seem.If you decided to self-install ceiling mirror or just thinking about such a possibility, offer to your attention the article.
In this article: opt for a mirrored ceiling mirrored ceiling types, surface preparation, installation of mirrored ceilings, mirrored ceilings photo.
- When should make a choice in favor of a mirror ceiling
- Types mirrored ceilings
- Mounting mirrored ceiling of the polystyrene plates
- installation of glass mirrored ceiling
- Surface preparation
- Installation mirrored tiles
- Hanging mirrored ceiling
When should make a choice in favor of a mirror ceiling
mirrored ceiling - it's always an interesting design decision.This ceiling is able to give the room a certain elegance and special atmosphere, and may also carry the function of the visual extension of the space (which is very important if this space very little).Mirrored cei
often do not mirror the entire ceiling, but only part of it in the form of a mirror insert.In this case, a mirror surface, mainly fulfills a decorative function.
Types mirrored ceilings
There are several types of mirror ceilings:
1. Mirrored ceilings
For mirror effect in the form of a ceiling, a special PVC film.It has a good reflective effect, but still, this effect differs from the effects that produce the real mirror.Mirror suspended ceiling and expands the space, but it is not reflected in a clear, slightly blurred, as it were blurred.
big advantage of mirror tension ceilings is that they are suitable for absolutely any premises, including wet;as well as any configuration of the ceiling (including complex multi-level).
like watching a ceiling in a given room can be viewed by typing into the search engine "mirror suspended ceiling picture."
2. Mirror polystyrene plate on the adhesive-based
These boards are manufactured in rolls.Choosing this type of mirror cloth is necessary to consider whether it is intended for wet areas (if you plan to install it in the bathroom or other wet room).
3. Classic glass mirrored ceiling.
This ceiling is, of course, is the best reflector, so the function of the visual extension of the space performs best.
SLR Mounting tension ceilings often carried out employees of the company, who bought it to the ceiling.
why dwell on the self-assembly of glass and mirror ceilings on how to make the most of the mirrored ceiling polystyrene plates.
Mounting mirrored ceiling of the polystyrene plates
Before you begin to install the mirror ceiling of this type, it is necessary to align the plate.This is best done under the load, so the alignment will happen much faster.
the back of the plate has a special adhesive layer, so sticking to the ceiling panels is fairly simple.Plate can be glued on gypsum board, and directly on the plaster.To
plates did not remain under the air bubbles, it is recommended to use a special rubber roller, which can eliminate them.
Please note that in case of installation of the ceiling should not be used in embedded halogen lamps or too powerful lamps, since then the coating may be subjected to some deformation.
Polystyrene mirrored ceiling price which is lower than the ceiling of the mirror glass plates, is gaining popularity.
installation of glass mirrored ceiling
mirrored ceiling is most often made of separate square or rectangular tiles.Mirror tiles on the ceiling is like the traditional color, and performed in other color schemes (pink, blue, gold mirror).
initially should calculate the right amount of tiles, with their pre-defined size.Cutting tile is better, of course, trust the professionals, because for it requires a special tool and good skills.
also in the tile need to prepare a place for fixtures.
Theoretically mirror tiles can be installed directly on a concrete ceiling.But as a rule, such a ceiling is not perfectly flat, but the surface beneath a mirrored ceiling should be flat, or possibly wrong refraction and reflection, as a result, tainted the overall impression from the ceiling and whittling down its advantages.
therefore recommended to align the ceiling waterproof moisture-resistant plywood or plasterboard.
Installation mirrored tiles
There are two ways to mount the mirror tiles: bonding and fastening screws.
Bonding is made with special glue, which is applied on the perimeter and the diagonals of each tile.Tile coated with a glue should be pressed to the surface and hold for some time;take away from her hand should be just making sure she was stuck and not fall.
In the case of mounting screws need to drill in every corner of the tile carefully drill a hole for the screw.Next to each screw wear rubber shaybochki (to avoid damage to the surface of the glass) and made mount on dowels.In the field of fastening screws are then mounted special chrome caps to give a total surface area of more than aesthetics.
Hanging mirrored ceiling
There is also a more complex version - hanging mirrored ceiling.In this case, it made a special harness design, consisting of a metal frame with guides.Then in this stacked mirror structure selected size.The design must be very strong and firmly secured to withstand considerable weight mirrors.
We bring you the video, which depicts the process of mounting a mirror suspended ceiling.
By installation of mirrored ceilings should not forget that the mirror tiles - a rather fragile material and treat it should be taken to avoid trouble with the subsequent buy additional tiles.