Let's start with the fact that the installation of suspended ceilings - the work of professionals. whole process, from the measurements of the room and prepare for installation, and up to a stretch ceiling perform without some experience possible.
- Installation of suspended ceilings.The subtleties of the preparatory phase
- Technology Mounting tension ceilings: Milestones
- Ways Mounting tension ceilings
- Brief installation instructions fabric suspended ceilings
- Installation of suspended ceilings.Price of the issue.
- Installation of suspended ceilings.VIDEO
Stretch ceiling can be matte, glossy, satin, seamless, stylized, tissue, contain any drawing or even be semi-transparent!
When selecting firms providing services for installation of suspended ceilings, guided by those who work with materials such producers:
- TM C-Light (Russia);
- TM De Miel (France);
- TM L`ete (France);
- TM Azalee (Germany);
- TM Clipso (Switzerland, fabric ceilings);
- TM MonLange (Belgium, seamless ceilings).
and take into account customer reviews of this company.
most often the choice falls on the consumer's seamless ceilings French and Belgian.The warranty period of suspended ceilings up to 15 years.
Installation of suspended ceilings.The subtleties of the preparatory phase
After all measurements have been carried out and compiled mounting design, the conditions of the room must not be changed.
customer is obliged to provide free access to the team room walls, ieclear the room of furniture, or if the floor area allows to move the furniture to the center of the room.
Before starting work, the customer must specify the place of the proposed installation of the lights and mark the point on the circuit mounting ceiling.To the installation of lighting devices the customer must first carry out the wiring.
Scheme mounting tension ceiling should also be indicated flush line at fixing moldings to the walls of the room.
The room must be observed air temperature to 60 degrees.Also, the room should be well heated.
walls of the room at fixing of suspended ceilings have to be straight, strong and intact.
Technology installation of stretch ceiling provides for the nomination of the ceiling gidrourovnya.
design for mounting particularly difficult types of ceilings (eg, multilevel ceilings) must be made by the customer's drawings, previously agreed with the contractor.
Power fixtures built into the suspended ceiling should not exceed 40 W (35 W for halogen bulbs).
Technology installation of suspended ceilings: Milestones
Room preparation.The room is cleaned of debris and furniture.
mounting base plate.Aluminium profile (in some cases - the profile of plastic) is fixed to 2.5 cm below the slab along the entire perimeter of the working space.Step fasteners - 20-25 cm.
preparatory work.The cloth Minimized previously for conveying heated with warm air, expand and attach to the elements mounted on the perimeter frame at several points.
tension ceilings.Using a heat gun, a master for one hour heats the room to 60 degrees and there is a stretch ceiling installation.Installation time when the area of the ceiling in a room of 18 m² - 2-3 hours.
making holes for output wiring in stretch ceilings and installing fixtures.
methods of installation of suspended ceilings
Today, the most common such systems installation:
This principle is only suitable for the installation of PVC film.
advantage of this system - easy dismantling stretch ceiling in case of need, and ease of refitting the web. With this mounting system sheet must be made strictly on the form of the space.
Harpoon system provides precise cutting blade tensioning, welding film during installation and welding of soft PVC Profile on the perimeter of the film in a production workshop.
fabric is made completely "overlapping" room.After installation is complete, the excess material is removed.Stretch ceiling mounted in such a way to dismantle without damaging the fabric is impossible.
This mounting method is applicable to both the film and tissue ceilings.
Wedge system - is firmly established ceilings.Technology installation in such a way to allow the presence of minor errors in the measurements of the ceiling area.This method also helps to save money on material, more precisely, on their value.
With this system the loss of height of the room will be only 1.5 cm. The system settings apply to several types of skirting:
- skirting with a flexible insert.
This system is designed for installation of fasteners seamless ceilings (eg ceilings DESCOR).
of these systems is the cheapest of fasteners.When installing the ceiling on shtapikovuyu system part of the ceiling in the event of flooding to drain the water can be removed.
fastening system for tissue ceilings
ceilings tissue (eg, leaf TM CLIPSO) using the visible plastic molding.
Along the perimeter of the working space on the wall is attached a plastic molding, which is then cleaned and degreased sections.Allowances on the edges of blades for mounting are on average 5-10 cm. From the middle of the wall using a special spatula, canvas prints fixed, moving to the corners of the room.Cloth gradually tighten.Work completed latching webs in the corners of the room.
Under this system, the installation of suspended ceilings warm the room is not required.
short instruction on installation of fabric suspended ceilings
You will need:
- spatula (half round, straight);
- building knife;
- rock wool;
- ladder (good and stable choice - a stepladder Krause);
- building hairdryer.
We measure the room.
hacksaw cut into the profile at an angle of 45 °.
Cut sound insulation boards.Fix the plate for thermal insulation on the dowel-nails.
perform marking boundaries stretch ceiling on the walls below the level of the room sound insulation layer.On average, the suspended ceiling picks up to 10 cm in height.
We fix profiles: glue is applied on a baguette, fixing it on the wall of the drawn line level.
in increments of 10 cm hole is drilled in the profile.From the corners of the room, as well as at the intersection of the profile of the hole should be located at a distance of no more than 3cm.The screws are screwed into the holes.
fabric from the middle of the room a trowel fix the steps of 50cm, while the edges of the belt should stay for a baguette.
Fabric pull the edges from the middle to the corners, spreading it evenly.The fabric in the corners are fixed in the last turn.
To install the fabric stretch ceiling does not provide space heating or the use of a heat gun. However, the formation of "wrinkles" on the web, they can be smooth with the help of the dryer building.
Keep the dryer at 15 cm from the blade, circular motions distribute hot air.
With a straight line to the edge of the spatula blade, cut the excess fabric.
When it comes to the installation of a stretch ceiling mount to drywall, pre-need to strengthen the construction of the wall - a wall put a wooden mortgage for sustainability.
Terms installation of suspended ceilings in various types of premises are different, rather recommendations for selection of the material.Procedurally in this regard is not much difference.
Sole specification requires preparation for installation of suspended ceilings in the bathroom: bathroom wall should be tiled, not reaching to the ceiling 10-15 cm. Baguette mounted above the top row of tiles, and it is then stretched canvas.
Another option - tiling the entire surface of the walls of the bathroom and tile fixing baguette top row.However, this method is irrational and unprofitable: the contract for the installation of stretch ceiling will necessarily contain items about the possible damage to tiles and organization performing installation work, the responsibility for such damage will not bear.
are reading: Types baguettes for ceilings
Installation of suspended ceilings.Price issue
cost of works and materials will depend largely on two factors - the area of the premises and the type of material.The cheapest material - matte stretch ceiling will cost 330 rubles. / M² (Moscow) or 96 USD. / M² (Kiev).If it is a fabric roof, the cost can be as high as 2250 rub. / M.
However, rare materials are sold separately.
Material cost + installation following:
Kiev: depending on the material and the master, the price is in the range of 150-400 USD.per sq.m.
Moscow: from 250 rubles.up to 3000 rubles.and higher.
Installation of suspended ceilings.VIDEO