Finishing the ceiling does not only practical and decorative function.
due to suspension design and various types of lighting can serve as a ceiling for the zoning of the premises.
Duplex and multi-level ceilings successfully cope with these problems.
- Wiring Layout - how to recapture the level of the ceiling right
- mounting frame
- Design multilevel ceilings
- Trey ceilings with their hands, VIDEO:
essentially questions of "how to make a two-levelceiling "and" how to make a multilevel ceiling "have one answer.Installation principle tiered ceiling is one, the only difference in the number of levels and forms of construction.
Basically multilevel ceilings made of GCR less PVC, aluminum rails and other materials.The frame is made of metal profile.
Preparation Before you start any work, you must consider the height of the structure to check whether it is possible so to lower the ceiling.When standard ceiling height
as little as possible to take the height, it is possible to use as a baseline the ceiling itself, but in this case, it must first be leveled.Making sure that after the project ceiling is not to put pressure on the head, you can start the design and procurement of materials.
Since the design is complex, requires a detailed diagram of the ceiling.The planned design desirable to defer to the sketches, drawings with dimensions facilitate the calculation and installation of ceiling.Possible structures can be modeled using computer programs.
Finally, having determined what will be the ceiling, you can calculate and acquire the necessary profile, hangers, fasteners, anchors, anchors, screws, drywall, light fixtures and other components for the tiered ceiling.
first thing that you must project a ceiling - it's wiring harness to the lights and switches.Work should be performed by a specialist, since it includes many nuances.
selects the appropriate design power devices wire size, wire laid in the corrugations, connections are made only in the terminal boxes. Spotlights connected groups , for lamps, designed for low voltage, a transformer, etc.
layout - how to recapture the level of the ceiling right
exactly set the level of the lower limit of the ceiling, you can use the water or laser level.On the walls of a pencil marked the height of the structure, to the ceiling with blueprints transferred all of its lines.They should be marked all the lines, which will be mounted profile and suspensions.Straight between points can fight off the masking cord.
Installation may start with a lower or upper tier.This depends on the area of a portion of the structure more.
For example, if the second tier larger than the first, the first profitable to mount the second and vice versa.When first installed the first tier, it can not completely sheathed with plasterboard, but only a little more than up to the border of the second tier, that is sheathed with only the visible part of the first tier.
May as the first level acts as a base ceiling mounted frame of the second level.To do this, you must first be mounted on the marked lines on the wall and ceiling of the guide profile.
If the line on which is mounted a profile is curved, the two adjacent walls of the profile and the profile given to incise the desired bend.Each such profile segments separately attached to the base.
next step - mount hangers to the ceiling with anchor dowels.Hangers are mounted every 60 cm above the seats, which will host the longitudinal profile.
then separately going to frame the side of the second level, one guiding profile already screwed ceiling, now you need a guide profile, which will be the bottom, tie stretches the ceiling profile along the length equal to the height of the second tier.
For this, they are cut a little more than you need on each side cut off pieces and left sides of a central protrusion for attachment to the guide profiles.These projections podgibayutsya, cut perpendicular to the profile is inserted into the guide profile and screwed to it, "seeds."Step between the profiles rectilinear construction - 60 cm, with curvilinear - in 2-3 times less.
collected part of the frame is raised and projections at the free edges of the segments ceiling profiles are screwed to the guide profile on the ceiling.If the height of the second level is planned to small, it can be easier to do - to take as the marginalia a CD-profile.
Now we need to cut the drywall strip width in the height of the second level and attach them to the side with screws.
Next set longitudinal profile: they are fixed between the guides and fixed suspensions.With the help of crabs to the longitudinal mounted cross profiles.
At the end of the lower plane is sheathed with plasterboard, cut out holes for the lights.
Where necessary bend, cut drywall desired size, rolled from one side roller with needles and slightly moistened with water.Lie down, a sheet is easily bent and fastened to the frame.
If the second tier is attached to the first, but not to the basic ceiling, the mounting should be performed in places where there is the profile of the plasterboard.Therefore, during the installation of the first tier in accordance with the schemes set embedded profile for the installation of the ceiling of the second level.
tiered ceiling installation can be performed in a different sequence and with different types of profiles.
Design multilevel ceilings
Two- and multilevel ceilings serve as a nice decoration for any room, from the hall to the bedroom, but very often they are used in the living room.
One of the most popular options - open a thin box around the perimeter of the ceiling with spotlights and hidden in the depths of LED.
Design multilevel ceilings in the nursery may be the epitome of children's drawings and cartoons.It is interesting to look huge flowers of plasterboard or protruding circles of different sizes, which can be painted in a different color.
Trey ceilings with their hands, VIDEO: