currently training Installation of suspended ceilings may occur quite independently of previous experience.However, the theoretical and material part of the subject should be studied thoroughly before the workshops.
- Materials and tools
- Preparation and installation of suspended ceilings.Progress
- $ What, where, how much?
- Video Tutorials professional methods of installation of suspended ceilings
Materials and tools
So regardless of whether you are learning on their own or not, you should know that all commercially available materials and ceilings are different fixings.
- soft polyvinyl chloride (PVC);
- oliefirnaya fabric impregnated with polyurethane.
- harpoon (usually the factory mounts and so expensive photo wallpapers. D.);
- harpoon (bead is a great alternative).
tool for installation of suspended ceilings is better to have quality
In general, the tool list is as follows:
- levels, laser level
- hammer, screwdriver
- heat gun
- gas cylinder
- two ladders
- bladesfor the installation and / or spatula
to determine which components for installation of suspended ceilings are required in each case, you should imagine in detail the process of preparation and installation.Below we consider in detail all the stages.
Preparation and installation of suspended ceilings.Progress
production measurements for suspended ceilings
Logically, any instruction on installation of suspended ceilings begins with the removal of samples.Quality removal of measures is key to a successful installation.At the same time, this complex is nothing: it is necessary to take a sheet of paper to measure the perimeter of the ceiling and fix them in the drawing.Special conditions of measurements are:
- removal measurements at the level of the ceiling mounting;
- precision measurement should not exceed 5 mm;
- addition to the perimeter, it is necessary to remove all diagonal measurements, including intermediates, etc.
- very useful to take measurements and apply them to the drawing indicating the windows, doors and other elements of the room.
production assembly Profile
the mounting equipment for mounting the mounting profile is determined by what and how is fixed on the perimeter of the room.It is useful to align the level of laser levels and all parts of the mount.It is important to remember the following when installing fixtures:
- minimum distance to the ceiling must take into account reception fixtures;
- docking fixture at the corners of the plinth is similar to the interface, ie,45 degrees;
- step for attaching to the wall tiles and the metal is 12 cm, and plasterboard, concrete and bricks - 8 cm.
Installing racks fixtures
Terms racks for installation of fixturesdetermined by the design of the latter. That's what should be done at this stage:
- identify places on the ceiling racks of lamps;
- do everything that is necessary on the part of the wiring;
- using plumb projected place racks on the floor, then navigate to them: racks will not be seen after pulling the ceiling.
Mounting tension ceiling film
Installation of suspended ceilings without the heat produced is much less than with heating;therefore described herein installation technique involves heating the tissue. direct installation of suspended ceilings fabric is described in detail in the manual from the manufacturer.Here are some tips that may not contain any one direction, it should be borne in mind:
- no piercing and cutting items in the vicinity of the web all the time working with him;
- need to have clean hands, tools, and avoid falling leaf on the floor until the end of the installation process;
- can not bring heaters or open fire to the canvas, it can not overheat as heat gun;
- if after installing a ceiling on it formed creases, it is possible to again warm up the canvas and make it stretch.
This part is the most responsible and clear to follow instructions makes seamless installation of suspended ceilings simple thing, which is possible to complete on their own.
There is not much "technology" stretching the fabric or film, but the meaning of any of them is reduced to a uniform distribution of the ceiling paintings in order to permit the adjustment of the web due to the heat.
should be remembered that the film heated by increasing its area by 10%
When it cools and is a contraction of the "miracle" that captivates the eye with its perfectly smooth surface.Crowned the process pulling blade heating film for a quarter of an hour.After that, the room must be ventilated.
Generally used spotlights;It should be remembered that as point and other fixtures should not have power over 60 watts, if they are in the immediate vicinity of the canvas stretched ceiling.
here, just what we needed, will approach the level of the projections on the floor, pointing to the location of the racks.On the canvas should be done to mark the holes in front of racks of lamps.If it spotlights, their rings are lubricated with glue and glued to the canvas ceiling.Bonding should be done across the contacting surface of the ring for a full fit fabric to the edges of the lamp.
Only then cut a hole in the fabric, which is produced by fitting the lamp height and inset lights.At this point, we can talk about the completion of mounting tension ceiling suspended.
are reading: Lamps for suspended ceilings - photos and secrets mounting
$ What, where, how much?
Of course, that only very large enthusiasts and fans to do everything with their hands only dare to such an experiment for them, of course, the cost of installation of suspended ceilings is crucial.For reference: the average cost of installing suspended ceilings for the city of Moscow is in the range from 250 to 3000 rubles., And in Kiev - from 150 to 400 UAH.for the quarter.m.
speed professional installation varies depending on the complexity of "relief" and materials about the value of 15 sq.m for 2-4 hours of work.Of course, what matters is not just how much the work of professionals from the company Installation of suspended ceilings, but also with what brands they work.
Domestic manufacturers like Eline ™ (Russia) begin to gain market share, but the leaders, for example, from Germany - Pongs, ECOfolie, Renolit, and France - CTN, SEF will be a long time to hold the lead, both in quality and price.
Based on this, you should pay attention to work with some brands of the company, suppliers of such services, including the materials and tools they use in their work. Reviews and examples of the work of the company are the best advertising the quality of their work.
Video Tutorials professional methods of installation of suspended ceilings
production technology of such installation work is sometimes perceived clearly much better, so the plot is offered two training work of professionals.All the nuances of working is impossible to cover in any training course - practice is the best teacher.