The structure of liquid wallpaper represents a variant of the famous plaster and wall decoration liquid wallpaper is the final stage of finishing work, both outside and inside the premises.
term "liquid" originally appeared as a part of wallpaper were cellulose components, and a bunch of water, as a basic and universal solvent.
For normal plaster styling has evolved into what it represents today sticky liquid wallpaper.A sticker traditional wallpaper in some cases, losing at least because liquid wallpaper more resistant to UV, moisture and mechanical stress.Some experts point out that liquid wallpaper even have some elasticity, which can be seen when the wall sags or crack, but it's not all the benefits of liquid wallpaper.
- Preparing walls for wallpaper liquid
- tool for applying liquid wallpaper
- How do liquid wallpaper Liquid wallpaper
- how to apply correctly
- Like glue - video, how to do it with their own hands
- Liquid wallpaper: a master class with a decorative coating
- Liquid wallpaper: questions and details care
- How to apply liquid wallpaper on the ceiling: features
- Liquid wallpaper (video) on the ceiling
- Liquid wallpaper: the price of materials and the cost of works
Preparing walls for wallpaper liquid
primer under liquid wallpaper is a prerequisite and a guarantee that the wallpaper will look like and propertieswhich are characteristic liquid wallpaper: saving the color palette does not change with time, strength characteristics, enhanced sound and thermal insulation, and low moisture absorption.
Depending on the surface, which will be applied to liquid wallpaper, select equipment training.This is due to the fact that different materials interact differently with water - the universal solvent.
That particular use of a primer, which must be considered when applied Wallpaper:
- on drywall: it is necessary to prime the entire surface, because the embedded joints are able to absorb much more moisture than drywall;so the 2-3 primer layer negate these inhomogeneities;
- in the paint: it all depends on what is under the paint and a layer thickness of the paint;In the general case, when the paint is applied professionally, priming is not necessary;for best effect, liquid wallpaper paint should be applied to within the first 24 hours;
- to whitewash: need a good primer after she removed whitewash;
- on chipboard: to neutralize the possible uneven absorption of water, you need 2-3 coats of primer;
- a tree even if it is a good array of wood, still need a primer because the entire surface of the wood is uneven absorptive capacity, as well as the structure of the tree;
- on concrete: strong concrete surface must be isolated from the liquid wallpaper primer
- on oil paint: depends on the thickness of the paint layer, but keep in mind that oil paint itself is a good primer;
- plywood: here the general rule is that the thicker the plywood, the better;but in any case it should be primed 2-3 times, too.
Of particular note is that all of the items that are subject to corrosion - nails, screws, pins, boxes, panels, corners - and that are intended to conceal the liquid wallpaper, you must pre-coated with a protective layer, for example, enamel PF, latex paint, and so on.d.
There are some special primer such as, ALPINA company CAPAROL, are recommended specifically for liquid wallpaper.However, it should be remembered that the normal replacement of good primers can be oil-based paint.Negative comments received primer CERESIT.Rough surfaces, unless they are protected, can be directly used for liquid wallpaper, but when the surface is smooth, it is recommended immediately before applying liquid wallpaper primer to treat the surface with quartz dust.Alternatively this can be used DUFA Q815, SUPRIM-GRANIT, CERPLAST.An alternative would be to use a conventional primer with a marble (the same quartz) dust or fine sifted sand.Sometimes it is advisable to use a PVA glue - adding it, for example in water-based paints can significantly improve the adhesion to the surface of the wallpaper.
tool for applying liquid wallpaper
We must remember that the liquid wallpaper - a kind of plaster, which means that any set of professional plasterer-suited for work on the application of liquid wallpaper.
In most cases, the application roller is the main method for applying liquid wallpaper manually, which trowel is used to apply a layer of wallpaper to themselves on a wall or ceiling, and roller - to impart the desired surface pattern.
Although it should be noted that the liquid wallpaper (that is, how to make it roll, gun or spray) should be applied, depending on their consistency, complexity of the pattern, if any, and the amount of surface to be coated.
For example, for large surfaces, plus a bunch of spray compressor is quite suitable.For really large areas covering rational use of the hopper (a kind of spray gun).This is useful not only in terms of performance, but also in cases where a color scheme - dye liquid wallpaper, paint and should be equally large amount of wallpaper, that is, maintaining the same tone paint across the surface to be coated.The rest of the standard trowel and brushes are indispensable for the application of coatings, cleaning and painting of the surface of the individual elements.
How do liquid wallpaper
As mentioned above, the application of technology of liquid wallpaper defines the many components of successful use;However, the production of liquid wallpaper is comparable to laying the foundation of a new house.Liquid wallpaper considered here have the usual composition and they can cook their own hands.The use of wallpaper in this case involves a relatively small coverage area, and the use of a specific brand or manufacturer (COTEX, SILK PLASTER, SENIDECO, SILKCOAT) has no znacheniya.Itak:
Dry contents of the package with the liquid wallpaper is placed in the tank is relatively larger;even before the divorce, you should always read the instructions from the manufacturer.
For standard packages should be approximately 5 liters of water, the temperature of which must be a normal hand, as in this case, dilution is performed manually;Water is added to the container with the wallpaper.
dry material is mixed with water carefully hand (for some kinds of wallpaper is simply counter the use of agitators and mixers).
Stirring must be accompanied by a gradual topping up with water - about one glass at a time;thus it is possible to achieve the desired consistency, which will be useful for application to a wall or ceiling.
mixture must absorb sufficient water, for which they should be left for several hours in water (it is possible for the night);These technological features of liquid wallpaper, as well as others, such as associated with priming, should be considered when planning the work.
is important to understand that the preparation of wallpaper must be a multiple of a single package: Each package contains everything necessary for the preparation of normal wallpaper, so the division of a single package is not allowed.As a rule, on the packaging indicates the recommended amount of dry mix in recalculation on a particular surface coating, however, it is the widespread use of a single package (1 kg) to 5 square meters.m covered area.Because while stirring with water increases the volume of wallpaper and experienced painters and plasterers always recommended to have a slightly larger volume of dry mixture.It also becomes necessary if the repair or installation work in the room is not finished and will need sealing of something else.
Application of liquid wallpaper - video demonstration of several techniques (how to use a spatula, roll and hands in creating decorative wallpaper)
liquid wallpaper How to applyright
In general, liquid wallpaper, application technology which does not impose any additional requirements, applied with a spatula.The traditional technique of application of liquid wallpaper is practically no different from working with plaster;However, the technology works is, nevertheless, a number of features.
correct method of applying liquid wallpaper not extrude them, as in the case of plaster and cover loose leaves after application to a wall or ceiling.Some professionals compared to the process of applying liquid wallpaper with how eggs are put on bread - when excessive pressing eggs burst, and the wallpaper loses its appearance.
Like glue - video, how to do it with their own hands
Standard thickness of the applied liquid wallpaper on a flat surface is 1-2 mm.This is the answer to the question, how to apply liquid wallpaper - evenly.If there are surface irregularities, protrusions, cracks, the flow rate increases.Angles and other structural walls and ceiling projections also increase consumption and affect the evenness and uniform while the applied materials. Working with liquid wallpaper requires spatula to move naturally and did not interfere with the uniform application of wallpaper - it should be held at an angle (about 20 ° with respect to the working surface), allowing you to "squeeze" the wallpaper on the direction of travel.
production technology coating with a liquid wallpaper is that when applied too
thin layer is not adhered to the surface texture and the substrate is too thick - will be a significant cost overruns materials.Damage figures should fit into the surface and form a coherent whole with the rest of the coating weight.Lighting also affects the way the liquid glue wallpaper without errors - the light should fall to the side and is capable of working all the time to see all its surface roughness.Using spotlights and a portable lamp for this is quite enough.
A very important point is the choice of the site for the application of liquid wallpaper.This means that it is impossible to prepare a solution and apply only a portion of the wall or ceiling - should always cover the entire wall or ceiling, only in this case it is possible to achieve seamless and perfectly smooth surface with uniform texture, color and pattern.
As a rule, after the application of liquid wallpaper are sprayed with water to give them a uniform surface roughness.This applies only to the surface and can not influence the look of the ceiling or wall finishing in terms of having seams, joints, sagging or failures in the coating.For this reason, the uniformity of application of the solution and the ability to calculate the necessary amount of its specific areas pose the greatest difficulty for beginners.
Liquid wallpaper: a master class with a decorative coating
In decorative purposes in liquid wallpaper can be added sequins,tissue particles and so on. Depending on the properties of the additives and their concentrations and combinations can achieve different textures of the coating.Moreover, it should be remembered that, in this case, you can change not only the decorative component of wallpaper, but also the strength, insulation, etc.
Liquid wallpaper: questions and details care
Liquid wallpaper (repair them, in general, is not provided, but possible), you can protect and extend their lifespan.Firstly, liquid wallpaper can be painted with varnish.This option, for example, is often used when the liquid wallpaper used as an apron in the kitchen, and the question "Can I wash liquid wallpaper" no longer relevant.In this sense, easier and care of liquid wallpaper: they can be washed and even detergent.In regard to whether it is possible to paint, liquid wallpaper, you can say that it does not seem appropriate - in fact, you can simply paint the wall or ceiling without the use of liquid wallpaper.
There are no difficulties with how to remove liquid wallpaper or remove them, for example, in some place, or how to work with them in the course of repair.In most cases, the usual hand sprayer to apply water to the place where they will be removed wallpaper (airbrush with water can also be used in this case);then trowel or other tool carefully remove the top layer and formed separately from the rest.Upon completion of works to remove a layer of wallpaper is diluted with water and applied to the original location.Liquid wallpaper, which were removed from the walls or ceiling, can be stored for a long time without any loss of any quality.
How to apply liquid wallpaper on the ceiling: features
any master Application of liquid wallpaper will say that the ceiling wallpaper applied in the same way as on the walls, with the only difference being that the ceiling is not necessary to apply the solution with particles of different sizes - thesmaller particles of the solution, the easier it is to apply them to the ceiling.How to put liquid wallpaper (video tutorials are below) in manual mode and with the spray (in this case, you will need a compressor) can be seen in various manuals, but works with a ceiling should first apply a primer layer to give it a grab and only then apply the base layerliquid wallpaper.
Liquid wallpaper (video) on the ceiling
also recommend using 1 kg of dry mixture over a larger area than the walls - wallpaper weight printed on the ceiling, must be less than the weight of the same wallpaper on the walls.This is especially important in those areas where additional drying should be carried out.Incidentally, it is recommended to heat the room when the air temperature therein lower than 10 °;for this purpose, the heater is placed, which operates not only before but also after the application of liquid wallpaper.
Liquid wallpaper: the price of materials and the cost of works
price of liquid wallpaper is always about the same for most of the suppliers;Moreover, because this type of material has virtually no shelf life - it does not spoil, its wholesale customers are just contractors and large construction firms.This fact suggests a cheaper price when purchased together with the material work (there can also include the preparation and painting of the walls, plastering, etc.), That is, when the contractor uses his material and makes installation.To navigate in the prices of materials and services, here are the benchmarks (the price of brand-name wallpaper starts from $ 15-20 US) for the two capitals:
- Kiev: the price of liquid wallpaper - 50 UAH, and the cost of the application of 1 square.m - from UAH 50;
- Moscow: the price of liquid wallpaper - 300 rubles, and the cost of applying the 1Q.m - from 300 rubles.