Now people are increasingly seeking to move from cramped apartments of the city.After all, live in their own house, which, moreover, reflects the personality of the owner and is fully consistent with its taste - a real pleasure.
- roof of corrugated board with his hands
- Installation sheeting on the roof: Video
- How to fix corrugated roof sheeting
- Laying the roof
- $ cost corrugated
But,dream dreams, and it all begins with the construction.You can seek the services of a specialized firm or do it yourself.If you choose the first method, then you will be required only financial investments.But in the second case, the entire construction technology have to think on their own.
nuances in this long process a great many, but at some point there is always a question of how and what to do the roof.The roof is made of different materials:
- natural tile;
- soft tile;
- seam roof;
- bitumen sheets;
methods of work, there are also differe
Profiled Roofs of corrugated board are very popular and well-deserved.After all, this material has many advantages:
- environmental friendliness;
- decent appearance.
That, as far as this stuff looks good, is clearly seen in the photo.
sheeting is not only suitable for the manufacture of roofHousing, for example, will look great garage roof made of this material.
roof of corrugated board with his hands
Roofing - matter that requires certain skills and knowledge .If you are not a builder by occupation, it is useful description of the process, supported by a photo.
Ate you decide to cover the roof Decking, need to know that the material is quite light, it is important to consider when designing truss system.Too powerful and further enhanced the overlap is not required.
Important! roof itself can be as lean-and gable.Moreover, the angle of slope is almost completely depends on your aesthetic preferences.Typically, the angle applied from 12 degrees, but if desired, it can be made smaller.Only in this case, both horizontal and vertical overlap (should be in two waves) necessarily processed sealant.
For a roof or wall you want to use a carrier material.If the angle of the slope is large enough, it is quite suitable profiled brands NA-35, HC-20, C-44.For the small slope angle (5-8 degrees) needed self-supporting profile H-60 or H-75.
When installing corrugated many admit a number of errors, such as those mentioned in this video:
If all works will be completed technically true, this roof will last a long time and is just a joy.
Installation sheeting on the roof: Video
Any instruction on the construction of a much more understandable if it is supported by video:
This is especially important for beginners.After all, they are many notions are simply not experienced and therefore can not visualize them.If you see how things should be, the work will go much faster and easier.
How to fix corrugated roof
technology installation is not very complicated, but you need to follow all the recommendations very carefully.Photo step by step instructions to help to better understand the specifics and perform all work on a lot more accurate.
Important! To start, you need to calculate the amount of corrugated board.It is important to remember that the sheets are of two types - the dimensions differ by approximately 20%.When you purchase the material required to ask for instructions from the seller.If to this professional flooring such is not included - it is a serious reason to doubt its quality.
certified products necessarily provided with the installation manual, which is intended to facilitate the work of the buyer.The first step in roofing - execution of hydro, steam insulation.
It should be understood that the waterproofing is very important.Neglect it - extremely ill-advised move, it will cost in the end, much more expensive.When the ambient temperature drops condensation from which it should protect the house.
Positioning waterproofing material must, before installation of the roof on the crate, between the rafters, with some slack perpendicular to the slope.
followed by execution of ventilation.This point is important because even a small amount of moisture still gets between themselves floorings.The easiest way to arrange ventilation, just put on top of the insulation of wood slats.
You can then proceed directly to the installation of corrugated board.
If rectangular-pitched roof, before installation, you must fix Face board.To properly equip the wind area, the upper end board must be installed above the battens.After all, it is necessary to continue to strengthen the end plate.
important point - align the sheets need not end ramp (a common mistake), and the pre-tensioned cord along the eaves.
installing the first roofing sheet, it is necessary to fix the screw in the center (temporarily).Next 3-4 pieces, fastened together with screws on the crests.Finally, the sheets are fixed only after they leveled with respect to the eaves of the roof.This is done through the bottom of the profile to the sheathing on the ridge, on each of the second wave.
about how to choose the corrugated board that is right for you, it is best to consult with a specialist.The choice of colors, especially individual case depends on personal preference.
Laying the roof sheeting
Species placement may be different:
- vertical.Frontpage fit (on a temporary mount) on the bottom row.Next, the first sheet in the second row, the second sheet in the first, the second - in the second.The result is a block of four sheets.Next you need to lay the same blocks.Decking should be a drainage groove.
- In this case, several other units - consist of three sheets (two connected to each other, the first one on the second row).This method is suitable for the sheets having no drain groove.
Can be laid in a different decking on the roof, its price will vary.
$ cost corrugated
One of the first questions - how much is profiled?Its price per square meter can differ, for example, depending on the height of the waves:
- 6 mm - 36 hryvnia, or 108 rubles;
- 10 mm - 38 hryvnia, or 115 rubles;
- 35 mm - 43 hryvnia, or 129 rubles;
- 75 mm - 71 hryvnia, or 212 rubles.