- equipment and materials for ceilings
- $ Equipment for suspended ceilings: prices
- Mounting tension ceilings (video)
About what tool suspended ceilings can be useful in the work - on.
equipment and materials for ceilings
Most installation work you will need:
- Laser Roulette (EDM);
- gas generator heat (thermal gas gun for suspended ceilings, capacity 30-40 kW);
- gas cylinder (about 10-28 liters in volume);
- punch (power up to 0.5 kW);
- hammer drill (power up to 0.5 kW);
- cordless screwdriver;
- miter saw;
- blade assembly (set: short, long, angled spatula);
- clothespins, clamps (4-6 pcs.);
- ladders (2 pcs.);
- Autonomous gas leak detector;
- set of screwdrivers (including the driver with an indicator);
- tin snips;
- laser level (you can use water);
- otbivochnogo cord;
- Ballerina (used for cutting rings, round holes in plastic components);
- bevel gear for screwdriver bits;
- masking tape;
- adhesive foil;
- electrical tape;
- glue (best to use adhesive Kosmofen Ca 12);
- Files (round large, shallow, rectangular);
- diamond needle file;
- drill for metal (diameter 3 mm and 6 mm);
- feathers on glass and ceramics (6 mm diameter);
- concrete drill (5.5 mm in diameter and 6 mm);
- screws for wood and metal (the size of 35 mm-150 mm, 35 mm, 45 mm, respectively);
- screws, fleas (3.9 to 9.5 mm);
- Polypropylene dowels.
optimize such a list could be reduced to such tools:
- laser tape measure;
- laser level;
- manually punch;
- metal detector;
- heat gun (can be used as a gas and electric gun).
1. Laser Roulette. only this tool allows for precise measurements.All the data obtained from the measurements are stored in memory roulette.
2. laser level. used to mark the ceiling.When using the leveling may need telescopic rod (marking space when installing multi-level structures).
3. Hand punch. this tool punch holes in the aluminum baguettes (instead of baguette can be installed so-called « bump» ).Holes can be drilled in a baguette, and the traditional way - with a drill.However, the openings are located as a result of inaccurate drilling, with barbs.Punch holes of the same diameter will give identical.
4. Metal. Metal used in preparatory work to determine the material surface to which the profile will be assigned later.It is important to know whether the walls of metal profiles, concealed wiring or air bleed.
5. perforator, drill, screwdriver. a Punch secure the profile of stretch ceiling.To work may require a drill and a screwdriver.It is better to use the tools on the battery.That is where the need of adapters and indicator to determine the presence of voltage.
6. Heat gun. used to heat the PVC canvases.The advantage of the thermal power, the exploitation of which is more secure.However, the gas gun can be used in areas without power supply.
Additional elements for the design may be needed during the installation of lighting devices (mounting ring to strengthen the web inincision, a metal frame for fixing lamps (spotlights, floodlights, LED lighting), corrugation for cable and so on.), hoods (ventilation grills, rails for mounting corrugated vent itself extractor and so on.).
finished construction of suspended ceilings can decorate decorative border (decorative tape, masking tape or decorative cord).
TIP: When planning the installation, keep in mind how many drops suspended ceiling depending on embedded designs (minimum height - 3 cm, for mounting the webwithout concealed lighting).
Buy fabric and accessories for the installation of a stretch ceiling is possible in specialized departments of building hypermarkets and in specialized stores (including online stores known brands).
IMPORTANT! price of some types of components can vary depending upon the volume of purchases.
$ Equipment for suspended ceilings:
prices in the discharge of tools and equipment that are used only during installation of suspended ceilings can be attributed unless heat gun and special blades fortail threading.While the former are inexpensive (about $ 3-7 / pcs.) And buy them for one-time use and everyone can, by buying a heat gun should be approached with responsibility: the equipment is not cheap and the price of his work should triple.It is necessary to heat gun from $ 180 (the gas cylinder to buy separately).
If it is a stretch ceilings established by the width more than 5 m, can not do without welding seams webs.A welding, in turn, is impossible without special machine HDTV.
Mounting tension ceilings (video)
details on how to install suspended ceilings, and what's the difference between the types of suspended ceilingstell the following videos.