Wiring inside the house and the apartment is carried out in sequence and according to certain rules.
- sequence wiring own hands
- way to mount postings
- Some rules wiring
- $ cost of wiring
- Wiring video
sequence wiring own hands
- design. first drawn wiring diagram, determine the number of sockets, switches, lamps, their location, clustering, planning routes and count the power of devices that will connect to the network. On the basis of this calculated necessary power and automatic RCD is selected location introductory panel.
- markup. If this is not the primary laying of electrical wiring, and its replacement, the seeker needs proring wall wiring or a screwdriver indicator to determine whether the old wiring in places where it will be laid new.Running marking trails and places where there are boxes, outlets, lights and switches.
- Mount wiring
way to mount postings
way to mount entries vary a lot depending on the grounds on which they are laid.
- Posting of plastered brick and concrete is carried out in the cutting grooves, hollowed out in the plaster.
- Posting wood is carried out in a hermetically connecting metal pipes and metal terminal boxes or opened by means of insulators or cable kanallah.
- for walls in plasterboard is used in the management of PVC wiring ripples and metal sleeves.
According mounted Accessory structures extend wires assembled distribution and installation of the box.The distribution boxes are performed wiring.Methods of wiring:
- special clips.
applied and twisted wires, but the standards it should be used only as a preparation for soldering.
wires are connected to the internal wiring machines, RCD, and the counter is made to mount the outer wire (by a qualified electrician), the power cable supplied to the inner shield, you connect (using all the same electrician).
Some rules wiring
- Wiring is desirable to carry out immediately and fully trust it to one contractor.
- copper and aluminum wiring connections to behave badly - contact eventually collapses.If you need to connect copper and aluminum wires, you must use special terminals.
- Connections are made only in junction boxes, which must be accessible.
- Lifetime aluminum wiring - from 15 to 30 years.The old aluminum wiring in the apartment needs to be replaced, and better on firmer copper.
- can not save on wiring accessories - sockets and switches.They are no less important part of the system than the wires themselves.Their choice will affect the safety and comfort of use electricians.
- Keeping trails carried out only on a strictly vertical and horizontal lines parallel to the architectural lines. Trails chosen as short as possible.Plan wiring, especially hidden, with marked trails, you need to save.
- Wires of different groups is selected depending on the power of the connected equipment to them.For example, to extract and electric stove in the kitchen is necessary to conduct a separate line of the wire with a large cross-section than normal line outlets.
wiring harness There are sites that you can try to hold its own, there is work that can be performed only by an electrician with a tolerance.The cost of a complete wiring, depending on the size and complexity of the work can be several thousand hryvnia, or tens of thousands of rubles, but the safety and lives are disproportionately.