- Natural tile Braas
- installation of natural tile
- installation of natural tile: Video
- $ Natural tiles: price
Natural tile Braas
tile Braas, in additionaesthetic properties, has also a excellent performance properties.The advantages of the shingles, should include the possibility of its use on the roofs of complex design, and the angles of rays of 120. The relatively high profile of the tile and its low weight, make any building elegant and representative.
wide range of colors will allow to pick the shade that is most suitable for your building.
- size: 330h420 mm;
- support Length: 400mm;
- profile height: 25-28mm;
- the calculated width: 300-320mm;
- recommended slope: 120;
- overlaps: 7,6-11mm;
- step lath 31-34,5sm;
- consumption: 10 pcs / m2;
- weight: 4,5-5kg / pc;
- rated load: 0.51 kN / m2 with 10 units / m2 (step 33-34sm lath) 0.55 kN / m2 over 10 pcs / m2 (step lath 31-33sm).
When the device of the roof truss system, with time, may be subject to some deformation.In the case of natural tile cover, this fact does not require any attention, since tiles have a small gap through which she is experiencing stress.
only condition in the construction of the roof with the use of this material is the use of original materials and components for the units.
roof, which has a large area and angle of the rays, must have snow stop.
Natural tile has a fairly heavy weight of one unit, but this quality has a positive effect on the roof device as gives it greater solidity and rigidity.
roof of a tile, is one of the most profitable options for roofing, as clay, as the main material for its production, lies elsewhere.
owners of private houses and cottages, which have used this in his roof tiles, often leave feedback about it, as easy to install, environmentally friendly materials.
Photo examples of the tiles you can see below.
installation of natural tile
Laying tiles made on pre-assembled crate.This phase of the work is done at an angle of inclination to 450. Fixing each item comes with screws that can be supplied in the kit.Initially fixed ridge line, then Cornice.
Under truss system for this type of tile, you can choose any kind of timber - stacking technology is not changed.Mauerlat attached to bearing walls, as in the case of rigid roofing installation using threaded rods with a diameter of 10 mm wide nut and washers.Sometimes, for fastening timber mauerlat, directly to the belt bearing wall metal anchor.Each rafter foot rests on the need to bar mauerlat.
installation process graphically represented in the photo:
- porous ceramic block;
- porous ceramic block NF 6.87;
- U-shaped keramoblok with thermal insert of expanded polystyrene;
- reinforcement cage;
- anchor bolt;
- mauerlat designated threaded rod;
- steel angle;
- rafter - LVL beams 50h240mm;
- vapor barrier film;
- sheets of drywall;
- tile Braas;
- hydro, wind-proof membrane;
- counter-35h50mm from the bar .;
- LVL beams 50h100mm .;
- facing brick;
- J-shaped rack;
- board binder overhang LVL 35h100mm;
- board eaves LVL 35h100mm;
- soffit panel;
- frontal board LVL 35h200, vinyl fascine;
- gutter drainage system;
- element eaves;
- mineral wool insulation.
installation of natural tile: Video
$ Natural tiles: price
natural tile price for 1 square.m .:
- from 300 to 600 hryvnia in Ukraine;
- from 1200 to 1600 rubles in Russia.