After installing Windows the question arises, how and what to sheathe slopes.One of the most popular materials - plastic.However, not unreasonably: plastic panels - the cheapest and fastest way to finish repairs.
Before you jump to conclusions about the materials for plastic windows, think twice.Plastic is not environmentally friendly and also because it is easy to damage (most poverezhdeny requires replacement panels).A reasonable alternative to excluding these shortcomings - drywall.
- Slopes: finishing drywall
- Slopes of plasterboard (VIDEO)
- $ prices slopes of plasterboard
Slopes of plasterboard, along with sandwich panels of PVC and hollow plastic panels occupythe lion's share of the market.Compared to plastic materials plasterboard is cheaper, and any damage sooner or later appear on the surface of the sheet of drywall, easy to handle: plaster and repainting slope "treat" even the most annoying "injury" sheet.
Installation slopes of plasterboard with their hands is poss
consider how to make the slopes of plasterboard on the windows.
Slopes: finishing drywall
Working surface must be cleaned of dirt, extending building elements, debris, grease stains, as well as the old wall covering.Bare Island opening.
facing slope method suitable to your case is determined by removing the measurement distance from the edge of the window or door to the old slope.If this distance exceeds 3.4 cm, drywall mandatory put on a profile.
If the gap is less than 15-25 mm, sheets of drywall can and glue.
Remove wall measurements and in accordance with them, cut strips for drywall lining the side and upper slopes.To improve the thermal insulation of slopes plane walls, window sills and ceiling must be solid - the most without connections.
Installation of drywall sheets in the window slopes should be produce in the order to finish the GCR (or gypsum plasterboard) sidewall of the opening, and then you can start to work on the upper slopes.Along the outer edge around the perimeter of slopes for better securing screws screwed sheets.
The last thing on the window sill mount.Often, after the dismantling of the old sill (concrete or wood) is formed hole depth of up to 6 cm.
IMPORTANT!Sometimes vertical drop after removal of the old window sill can be up to 15 cm. In such cases, the basis for aligning sill have to install all available means.
example, by bookmarks in the pit of debris brick or similar material.In addition there is an alternative brick bookmarks and more reliable option: to put on the windowsill a smaller version of a dry floor - level the surface with the help of expanded clay backfill.
When laying bricks can be formed cracks reachable for drafts.Even if you close the gaps between the masonry mounting foam, to achieve long-term effect in this way will not succeed.
Unlike the "brick" method, expanded clay - a more reliable option.Backfilling has higher thermal insulation properties. backfill to secure poured a special compound - cement "milk", which after drying line the windowsill another layer of cement mortar.It is necessary to make as thin as possible.
Once all the parts are placed in places, the angles at the joints of gypsum boards should be covered with metal corners.Now you can putty surface slopes to sand and start finishing - wallpapering, painting, tiling.
Door slopes of plasterboard manufactured on a similar technology.The difference in the course of the work is only to strengthen the slope of interior design (plasterboard put in two layers or glue not put a dot, and striking composition of the entire leaf area) due to the increased usage of passage and a high probability of damage to a sheet of drywall.
IMPORTANT! draw your attention to the fact that we used the drywall with green outer layers, which, according to the conventional labeling is used exclusively for liquid-tight sheets of drywall.
Slopes of plasterboard (VIDEO)
$ prices slopes of plasterboard
for quality work on the slopes of plasterboard lining:
- in Moscow you can pay from 1 800 rubles.the processing window slope parameters 1400/1200/25 cm;
- in Kiev - 400 UAH.the processing of the slope of the window with the parameters of 1400/1200/25 cm.