ability to make his own furniture offers many advantages.Ready sofa or chair with individual dimensions fit perfectly in the area of housing, and find the right way to meet the interior decor of the room.An important is the fact that the new facility will cost half the price of the furniture, and sometimes even less.Many home master on padded stools and stools stuffed his hand, and now they dream to make a corner sofa with his hands.
- Benefits own manufacturing sofa
- choice of materials
- Preparation Tools
- Making corner sofa
- Assembling left side
- Assembling the right side of
- Zaporolonivanie skeletons
- homemade sofa upholstery
Benefits own manufacturing
Craft sofa bed can each person with a small set of tools and minimal training.Sofa, which we suggest you make, the quality will not yield range, which is available in 90% of modern shops, and even surpass many of the proposals.In favor of the creation of
- you save money.Sofa will cost three to five times less expensive than store-bought.We suggest you develop your sofa, the most worrying about the level of savings, without compromising quality.
- you are making a sofa corner with his hands, and so do the quality control themselves!You do not have to fear that your couch is present raw bar on the ground are responsible knots and upholstery - low-quality foam.
- you can make this sofa design, any you need.Under your needs and dimensions.
- In the future you will be able to personally make a constriction of the sofa and then save.For example, you can see how much it costs to order today professional hauling furniture
- And, of course, with nothing to compare job satisfaction and pride in the product made by the hands.
choice of materials
reliability, we are planning to achieve with the help of sophisticated design, high-quality assembly and manual selection of materials.It is not necessary to use a time-consuming and complex compounds, for example, shipovye products - which are not available to inexperienced Homebrew.Expensive materials (laminated boards, beams with large cross section) should not be taken.For
need such materials: pine beams with a cross section of 30 by 50 millimeters (preferably pine), MDF, particle board, birch plywood that has a thickness of 5 and 15 millimeters, screws or wood screws, nails, padding polyester with a density of about 140170 g / l, batting, foam rubber with a thickness of 20 and 40 millimeters and weighing not less than 30 kg / m3, carpenter's glue and adhesive foam, foam rubber crumb, furniture fabric, furniture legs height of 50 millimeters, hoist the sofa.
Do not try to simplify the problem - it is not necessary to fasten parts with nails, because they quickly become loose, corner sofa begins to creak and falling apart before our eyes.The best solution is self-tapping screws.Crashing once a timber such hardware will keep the load for a long time.
No glue is indispensable in carpentry.But before we miss the mark and connect the surface, ensure proper assembly.When even the most ordinary adhesive sets, will not be able to separate the parts.Non-laminated boards must be varnished to prevent the release of formaldehyde in the air, so prepare varnish.
to manufacture corner sofa with his hands, you will need a tool: hand saw with a simple miter box to create a smooth drank, electric drill with speed control, to use it as a screwdriver, furniture stapler, a sewing machine, a sharp knifefor cutting foam.
simplest miter box, you can make yourself, but you can buy.Some difficulties may turn out with a hand saw during sawing chipboard and plywood.Better to use a circular saw.There is a more simple solution - cut to order for the size you need in a place where planning to buy stuff.This is true if you work in a city apartment, because this operation is very dusty at independent manufacturing of kitchen corner sofa or a sofa.
Making corner sofa
Decide first with the construction of the future corner sofa and its location in a residential area.Leave for later complex structures with oval tables and shelves.First, find out how to make his own bed the simplest forms and configurations, and then create a detailed drawing of a corner of the sofa with his hands with all dimensions and details.
armrests for a sofa requires two mirror armrest.Armrests should have 900 millimeters long, 200 millimeters wide and 550 millimeters in height.Take a large piece chipboard and 2 long rod, screws turn in the direction of particle board in timber.Step attachment - not less than 20 centimeters.Each bar is screwed by 4 screws, and into the end of timber - for 2.
is then nail fiberboard.Use two nails must be 25 increments of 10-15 centimeters.If you want to make a corner sofa evroknizhka own hands "for centuries", in addition to the nails, use carpenter's glue.Properly tighten the cover of the CPD and expose it flush with the bottom and the rear face.
After assembling the armrest obkleyte its foam.Before you label a little Steshov sharp edges and corners on the upper part of the product file or a rough plane.Please note that it is not accepted to glue the foam to the back of the armrest should stick to a layer of batting.
Assembling left side
Please fasten two pieces of particle board using the pads of plywood on the screws and carpenter's glue.In each half should be four screws.Screw the two legs of the bar and make the tie bars.Attach to the main sofa "ladder."The top timber should fit close to the bottom and build on it.
When assembling the seat frame, remember this piece carries heavy loads.To choose the best-quality work timber, which has no knots, especially on long bars.If a knot takes more than 40% cross-section, it is worth to give up using such a timber with his own hands in the manufacture of kitchen corner sofa.During assembly of the frame, measure the tape diagonal frame - they should be the same.
collected frame, set the frame.To make it easy to insert, loosen the front bar.Do not forget to lubricate all surfaces with adhesive, and can pull screws.Fasten the ends of the longitudinal bars in the long screws that have a length of 70-90 mm.
Attach the plywood to the screws and glue.The distance between the screws should be no more than 20 centimeters.If you use a thick cloth upholstery, breathable bad, it is recommended to do in the plywood every 30 centimeters holes that have a diameter of 15-20 mm for the exhaust air.
Attach fiberboard nails on the back with big hats and glue and glue foam cushions.The top layer of foam on the seat made whole, and the bottom - can be made of several pieces spliced, most importantly, that there was no voids.
Assembling the right side of
Once you have successfully collected the left side of the folding corner sofa with his hands, the question of its production almost solved.Begin to assemble the constituent elements of the right and remember that it is usually the bottom of the linen compartment.Cover all parts lacquered particleboard or choose to work laminated chipboard.
There is another method: before assembly can obtyanut side pieces of timber, chipboard and fibreboard that will handle inside the box, teak or calico.Pre-treat all sharp edges with sandpaper to them, it does not wipe cloth.
already familiar way to fasten parts of the DSP using the lining of plywood and collect all the blanks in the drawing.Along the perimeter of screw bars, they will build the boxes.You can use any of the bars, and even with knots - all the things that you have ranked as a waste.Nail the bottom of the DVP.
Mark out and drill the holes for the screws to hoist corner sofa.Bolts are used for furniture.They need to look out on the side where there is a bar.Glue together the foam seat cushion follow the principle remains - place the top piece of foam layer, the bottom two layers of pieces tamp.
To begin, remove measurements from all surfaces, because the foam will you cut it on them.To carve out a piece, just stick it in place.Each track will be easier to customize.For the seats need to use foam rubber, which has a thickness of 100 millimeters.
If you have not found the like, can be glued together from two sheets of 40 mm and one 20 mm.All can be used for trimming cutting out a suitable geometrical shape and fit together such pieces.If you do all the work carefully and slowly, soon you will be able to make their own hands corner sofas to order, that will be a good weld to the family budget.
homemade sofa upholstery
for tight fitting surfaces fabricate patterns.The first thing to do - is to measure the self-made sofa.Divide the sofa visually into sections.Remember that part of the cut anyway, and even if your sofa has a non-standard shape must be rectangular.Measure the two armrests, back and seat.
Then you need to cut the pattern of the wallpaper and newspapers, comparing the size of their drawings.On the patterns of the fabric can be cut out.If you have trouble, just attach the material to the seat or the back, marking the border with chalk.Fabric tailor seamy side up.Leave the seam allowance at least 5 centimeters, and if the edges of the selected fabric showered, you should leave more.
used tissue should be washed and the pressed.The fabric must be laid on a flat surface of a seamy side up on a section of the sofa, which correspond to pieces of fabric.The video of the corner sofa with his hands shows how to attach the pieces with a sofa using pins and fix their position.Without removing them from the couch, connect together the pieces and baste contrasting thread between them.
To cover perfectly sat on the couch, you should consider all its angles and curves.After the procedure, you need to sweep trim excess fabric and all seams prostrochite on a typewriter.Remove the front of the case and try on the sofa.If you plan, make the necessary adjustments and to make additional joints, removing unwanted tissue afterwards.
utjazhki able to change the look of the sofa, hold the fabric and reduce wrinkling.Make a hole in the plates are in advance.For utjazhek made use of nylon cord loop, pre-sewn to the upholstery.
order to reduce the level of abrasion foam between the skin and lay agrotextile this material that is known among covering materials for gardens.Then shoot upholstery fabric stapler.As a result, you get a comfortable, neat and budget sofa.
Now you can make a corner sofa or bed with his hands.The main thing is do not choose complex designs and drawings understandable for yourself.Everything has to happen gradually.If you can not do some things on their own or do some certain stage, the view offers us a video, or contact to the professionals and be sure to watch the process.And of course, if you do not want to waste your time and make your own bed, you can buy a sofa corner, which presented in a large assortment of modern stores.