It would seem, well, what change the doorknobs!
But, nevertheless, without them you can not do - except that completely abandon the doors.We suspect that few would be capable of it: apartments without doors, at least in the same bathroom, the day the fire will not find.
Therefore, the question of how to select and properly install the door handles, sooner or later everyone faces.
- Types of door handles
- in form and function to
- By Material
- How to choose?
- Install door handles - installation diagram and detailed instructions
Types of door handles
professionals recommend choosing doorknobs, based on knowledge of the specifics of the work and the ergonomic properties of each particular species.
in form and function to
There are such basic types of door handles:
- fixed (braces);
- falevye with a press mechanism;
- falevye with swivel mechanism (noby).
Stationary handles mounted on the door with a few screws or locking screws.The
Stationary handle does not interact with either snaps or the castle.
In its form, this hardware is divided into a few more subspecies - distinguish U-shaped, spherical and round the stationary handle.
handles with push mechanism staffed by lever, crashed into the door latch.Their work is that when you click on the handle operates the spring, retractable lock in "the bowels" fabric - so the door opens.If the handle is not mechanically affected, the latch is always in the extended position.
This system extremely convenient if the house there is a continuing need for a tightly closed doors.
worth knowing!All the classic mortise locks are equipped with just such handles - with the pressure mechanism.
When replacing the old knobs for new, do not forget to snap.After all, buying hardware with latches, distinct from existing, you expose yourself to unnecessary headaches - will further cut, and perhaps even to patch cloth.
installation of door handles with their hands will take you a few minutes, if you pick up the new elements with dimensions similar to the old one.
pen with twist mechanism (noby) have the shape of a ball.Often, their center is integrated keyhole.This opens the key they only one side;on the other side is blocking the button or latch.Such furniture - a great choice for interior doors, especially in the bathroom and toilet.
differ between the door handles not only the shape and work, but also the material from which they are made.
Metal pens are made of aluminum, brass, steel (and stainless) and other alloys.Technology of production of some of these involves the formation of a special coating on the product - it can be chrome plating, nickel plating, etc. Today, the most popular are the brass handles;Brass - Metal warm and extremely pleasant to the touch.It is resistant to heavy loads, relatively inexpensive to process and has high aesthetic.
Wooden made of various tree species, sometimes very valuable.
As for the quality of wooden handles, it is highly preferable that they were carved out of solid material, or their sudden attrition is inevitable.
Glass pens made from Murano or Bohemian glass.
Plastic (and other artificial) samples are usually mounted on the door separating the storage room in the building (e.g., a closet).
Accessories natural stone (Jade) - a real decoration of the room.These handles are often distinguished fanciful cut and florid carvings.
How to choose?
Door handles must necessarily be combined not only with the door, but the general character of the interior.When buying is not superfluous to assess the hardware to the touch;evaluate it in the hand, it does not cause any discomfort.
Consider the degree of load on the handle.Agree on a powerful, heavy door fittings hilenky quickly unusable - it simply will not sustain the effort that you have put to manipulate the web.
Priced handles differ as much as all other parameters.Depending on the shape and the material cost can be from several hundred to rubles ... amount exceeding the cost of the door.Door handles colombo are of high quality, beautiful design.You will be able to choose a suitable handle to your decor.
Install door handles - installation diagram and detailed instructions
After detailed acquaintance with the classification and selection of door handles and, hopefully, correct selection of suitable samples, it's time to move on to the study of the technology of their installation.
Installation instructions doorknobs
Installing the door handle on interior painting begins with its layout.First of all, check the height of the pencil, which will be located fittings.
Standard installation height of the door handle is in the range of ninety-one hundred centimeters from the floor.
but not necessarily strictly follow this figure - in each case should be considered the height of the other pens in the house, the growth of family members.It is important to understand that setting you make for yourself and not for some time sheet reporting.
All markup is best carried out with a good gon.
sharp pencil, draw a line from one side of the door and make a mark with an awl at a distance of sixty millimeters from the edge of the canvas.With a square, draw a line and at the end.Then do the same layout and with the other hand.
Line at the end of an awl and pierce like to share half the thickness of the door.
Then take the drill with the crown of the tree and begin to drill a hole on one side.
Attention!No need to drill right through - a depth equal to half the thickness of the door to start would be enough.In order not to get carried away, you can make the appropriate mark on the crown.
Full drill hole is carried out by a similar manipulation on the other side of the door (watch out for correct all measurements!).
doing so you can be sure that the reverse side of the leaf is not damaged, that the crown will not step aside.
drill relative to the door rests exclusively at right angles;do not let her deviations horizontally and vertically.
Now replace the pen crown drill and make a hole with the end of the door.Follow smoothness of motion drills.
Take a chisel and a punch by tapping circuit and make a selection.
Attach latch - it must completely drown, being in the same plane as the end face of the door.
latch tighten screws.
now remains to twist the two parts of the structure.Simply insert a handle and fall into the holes with the thread guide latch bolt.Then Place the other handle and pull all the bolts.
final stage of installation of door handles - installing metal frame on the box.The layout for this purpose can be done in two ways:
- smear the end of the tongue toothpaste, click on the pen and closed the door, shake it.Thus, the box will mark;
- close the door, push in the gap and a metal ruler, alternately combining it with the top and bottom of the tab, make a pencil mark appropriate.
Then attach the frame to the box.Mark the portion of the sample itself under the tongue and under the plate.First make a selection under the tongue.By cutting a contour frame can begin only after making sure that the tab of the latch and the door goes completely normally closed.
Metal frame after installation (screwed screws) must be in the same plane with the corresponding bar of the box.
The installation ends with the door handles - can enjoy the fruits of their labor.If the handles are easy to press and latch easily goes, then everything went well!