Today, interior double doors are very popular.They perfectly transform any room in the house.Select a door is not difficult, since their choice is very large, and problems with the installation will not arise if you know all the stages of work and have minimal specific skills.In this article, we will consider all the pros and cons of double doors, their types and all stages of the installation, and then you will see that this is no big deal.
- Bivalve interior doors (advantages and disadvantages)
- Pros Cons
- Types of double doors
- Removing the old door and the preparation of the doorway
- assembly and door frame types
- Set loops oninterior doors
- Installation boxes in the doorway
- Installing double-leaf doors
- Installation lock
- cost Bivalve interior doors
Bivalve interior doors (advantages and disadvantages)
- Ease of such doors is one of theimportant advantages.Pendulum system facilitates the opening of the doors in both directions at the same time, not prilazhivaya effortlessly.
- Variety of design of this type of door is not limited.
- Their appearance will give your home elegance, hospitality and comfort.
- Selection of double doors under the non-standard doorways much easier than single leaf.
significant shortcomings, this structure has not, except for small amounts of housing space, it may simply not be appropriate, and setting it in such conditions, you can find beauty and discomfort.To solve such problems, many opt for sliding doors.This compact variant for small areas is the best, and their mechanism of opening and closing the door, as quiet and smooth.
Types of double doors
Before you buy the double doors, you have to understand that this is what kinds.
- design has two principles of action - swinging and sliding.
- type: paneled glazed, paneled deaf and massive.
- Izgototavlivayutsya of aluminum, glass, wood, plastic, and MDF.
determine the size and design of the doors, as well as committing to buy it on time, you can forget about it, because the house is still a lot of work on the dismantling of the old door and its box.Do not forget to prepare the site for installation of the new one.With regard to the door frame, then you can do it yourself or buy.The width of the frame must match the width of the wall, in any case, not beyond speaking, in the case that, when the box is narrower, it is possible to use the transoms.Properly all about and height of the box, which is equal to the height of the doorway.Buying a loop, consider which of the parties will be opening to the finish on the stage does not have any difficulty.
Removing the old door and the preparation of the doorway
Initially, you must remove the old door off its hinges, and only then proceed to the recovery of the box.With mount or scrap gently detach the box, and then clean the opening of the remaining cement.If the cement is hard and can not be easily removed, and thus the surface will prevent the installation of the new box, it is possible to manage the removal of the previous foam.Place prepared, and is now focusing on the door frame, which is not necessarily to buy, and you can create yourself.
assembly and door frame types
door frame - a frame made of beams, which can be of two types - U-shaped and square.The rectangular box often used for interior doors, bathroom and toilet, and all other options are great doors without a threshold.
step of assembling the door frame:
1. Initially, before assembly of packaged lumber we need to make it fit the size of a double door.
The final result will be such:
SHVK = 2 * (SM + 3) 4 where
SHVK - width of the box on the inside;
SM - the width of the door.
2. Performing all measurements and markings, cut off at an angle of 45 degrees boxed block that is the unit with a fine tooth hacksaw.
3 .Further actions will plunge into the vertical part of the loop, as boxes and doors.
hammer with a chisel or a router carefully makes an incision, which then fit into the loop.But buying an overhead loop, you can do without plunging.
4 .At the finish of the work the assembly of the box can only collect all the parts in a heap.
With a portion to each other, twist them with three screws, but before that it is desirable to drill a hole with a diameter smaller than the diameter of the screw-connector, thus avoiding cracking during screw-fastening element.
Installing hinges and its quality is also an important aspect of your entire operation.The proper selection and installation of it depends on the reliability of the door and the process of opening and closing, as the loop completely of any kind - it is an important element standing between the door and the frame, not just standing, but unites them.
Installing hinges on interior doors
Many of us believed that the loop 2 is more than enough to secure an interior door, but as practice shows - it is not always the case.All depends on the weight of the door and its size, because it is recommended to install one additional loop in the middle.
- layout of locations should start from the top of the door, stepping 25cm, and by that mark is still 50 cm, in the same way to measure 25 cm from the bottom of the canvas.
- Then, using a pencil loop edges emphasize the upper and lower edges.
- Turning on the edge of the door, puts the open loop to the edge of the groove made paintings.
- Align carport with the previously traced lines, stroke a path flaps.
- against wood fibers cut off unnecessary part of us up to the mark.
- loop to lay perfectly aligned and gently release the marked space, not forgetting that the wood from heavy use may produce cracks.
- fit all the parts are screwed to the door awnings screws, minimum length is 3.5 cm.
from the installation duct everything is about the same:
- we note the alignment of the loop in a vertical position.
- Then insert the door to the box, keeping the gap to 4 mm between the blade and the upper beam.
- Pulling the door, cut chisel grooves and then inserting the back door, crashed into a loop in the box standing in the door.
- checked several times their functionality, make sure that the door comes in a box with no clues.
Installation boxes in the doorway
Installation boxes can be with pendent door, or without it.Before installation to avoid further problems with the cleaning foam construction to better protect the surface of paper, tape or else other suitable material.Box of interior clamshell doors set vertically using a spirit level or plummet.
1. initially exhibit stand with hinges and top bar.
2 .Through manipulation aligns them perfectly smooth.
3 .The next stage - boxes bursting elements using wedges.
4 .Then again, check the level of the rack, it is considered exposed if takes a strictly vertical position.
5 .After that, the same way you are installing a second rack.If necessary, if the walls are not straight, you need to adjust the door box using special small pads.
6 .Both side rack boxes drilled through holes for dowels, and the unit is fixed in the wall long strong screws.
However, there is another way of mounting the box in the opening - with a special glue "liquid nails".Initially, the adhesive should be applied to the wood, then set the frame and put spacers.It is better to put a spacer under the cloth to avoid scratching the door.The advantage of this method is that there is no need for making holes.
Installing double-leaf doors
Before you start fixing a connecting two-leaf doors on its fixed leaf must mount bolt - metal pin that protrudes from the ends when locking.
mounting bolts Steps:
- originally supposed to bolt placement layout is applied.
- then drilled a hole depth of which should correspond to the thickness of the pin and the diameter - 3-4 mm less than its width.To the door closed without play, holes should be done with a slight angle.
- With cutting Carpentry tools adjusted to the desired groove width and depth.After that bolt is inserted and secured with screws.
now proceed to the installation of the double-leaf doors - canopy fabrics and careful fitting them to each other, using props and racks.
Installation Steps clamshell doors:
1 .Install the first door and immediately check how it closes.If harness rubs against the jamb, it is necessary to deepen the grooves.If the door "walks", then the flap hinge puts a small cardboard.
2 .Then similarly assemble the second door.
After full adjustment of double-leaf door hinge screws needed to fix the rest.To fix while not affect the location of the structure is advised between the base of the opening and install the gasket elements boxes of wood.
worth remembering that after the installation of the door is not recommended to carry out the work, which will cause the increase of humidity in the room, for example, plastered, primed, painted walls, etc.
Before beginning this phase of the installation of interior double doors should carefully prepare the surface in order to avoid further difficulties associated with the removal of foam.To do this, the door should be closed with plastic and duct door okleyte masking tape.Once this is done foaming space between the wall and the box.Then, within 2-3 hours of foam must be completely dry.
important that the foam has a low coefficient of expansion, because otherwise the box can be bent.
Box Castle is one of the most complex manipulation in two-step installation of interior doors.The fact is that this stage requires surgical precision, as the discrepancy minute stop and mate can cause seizure, which subsequently lead to the need to reinstall the lock, and it is to spoil the look of the door.In addition, more complexity is that you need to make the sidebar of the castle shed.Therefore, this step should be taken with the utmost responsibility.
1 .Originally applied to the end of the lock body to the planned height of the door, then encircled with an awl.
2 .Thereafter, necessary to make the groove depth is equal to the length of the lock.
3 of traces stage - the space housing the castle.If the hole for the lock is done correctly, it will be flush with the strap end of the plane.
Doors Sliding double-wing - photos illustrative examples:
cost Bivalve interior doors
double doors Total price depends primarily on the material from which made door.More than all designs are made of solid wood.Materials such as chipboard and MDF are significantly inferior in value.Generates price double doors and the presence and type of mortise lock.
DOUBLE interior doors of economy class, of course, attracted by its accessibility.But you must know what is achieved by the low price.
Firstly, these doors require the emptiness inside.Manufacturer saves on material, which leads to a reduction in cost of the finished products.
Secondly, the coating is likely to make artificial.For example, take Veneer - a thin layer of wood, which is used for coating products, if it is unnatural, it is simply an artificial laminate coating.
Installing double-leaf interior door - Video: