Even if you want to install a bath more tightly to the wall, you are unlikely to succeed!At the junction in any case, a gap is formed, as the perfectly smooth walls do not exist.Previously, these slots plastered using grout, and the top covered with oil paint.At the moment, there are more elegant solutions!To help you come curbs bath.
- Features curbs bath
- Types curbs bath
- Plastic borders
- Ceramic borders
- curbs Curbs of natural stone
- Installing ceramic curb their own hands
- Advantages of ceramicborder
- Installation Ceramic Tile curb
- Installing ceramic tiles on the border
- installation of plastic curb their own hands
Features curbs bath
open joints at a side entails consequences.Let's start with the fact that these cracks can spoil the appearance of decoration, you create persist for a long time.This gap promises you increased dampness in the bathroom.Through slot under the bathtub while
Such moisture dries long, especially at high levels of humidity in the room, or if the space under the bathroom you covered installing decorative screen.Constant moisture is the most favorable conditions for the growth of mold, mildew and harmful microbes.Moreover, in the bathroom, there are always parts and elements of metal.So they porzhaveyut quickly.
therefore recommended necessarily prevent a process in which there is water seepage under the bath.So you eliminate excessive dampness, and you do not have to deal with mold.Curbs bath (corners, skirting boards) are just for hiding these joints that remain between the wall and the bathroom.
Choose the most successful version, taking into account the following points: the material from which made wall decoration, financial considerations, the magnitude of the gap that was left between the edge of the tub and wall coverings.Most manufacturers initially involve installation curbs, which comes complete with tile.Because the cost curbs bath is not too high.
If you are finished with the wall in the bathroom other material rather than tiles, it is best to use a border of the same material.For example, a fiberglass or plastic battens can pick up a plastic border.Curbs, which is combined with the main colors of the interior, to support the color balance.With these elements will conduct functional zoning areas, highlighting the section of the wall.To hide the joint between the wall and the rim of acrylic bathtubs in acrylic choose.
Types curbs bath
On sale curbs of various kinds, which are made of different materials.Before buying Profile Bath encouraged to review each of them.
Plastic known among consumers as a practical material that belongs to the category of inexpensive and very popular products.Besides, it's great to work in the bathroom.Therefore, PVC border will be the most economical option.Plastic borders bath presented in a variety of options, and you can buy the most suitable for any interior.Install curbs on plastic adhesive formulations using "liquid nails".
Also on sale are presented adhesive borders for bath made of plastic.For the installation of this product simply remove the protective cover, then attach the item in place.Borders of plastic glued under the tile or her.The product is installed in the first situation before they start to lay tile.In the second case the sealed joint, formed between a wall and a bath, after completion of the repair work.
Plastic is very popular, but trust the border of this lightweight material is not many.It is for those customers who appreciate the thoroughness were created ceramic curbs bathroom.This material - durable and durable.If the walls of your bath with tiled, it will go perfectly with the trim.
Previously the purpose of registration of the gaps between the tub and wall tiles used ordinary, creating a curb in place and cutting into pieces the size you want the whole tile.Today, this eliminated the need for meticulous work.You can buy ready-made ceramic borders.Also in the sale is presented not only curb tiled bathroom.If desired, you can find and angular elements for design corners junction.
term use ceramic borders is not limited to one decade.However, with proper installation of the product.A curb on installing ceramic bath - is not an easy thing.Such work can be compared with the laying of tiles, if we evaluate its complexity.
curbs curbs, which are installed at the junction of the bath and the walls are very practical and convenient.They represent a unique sealing tape, which is made from polyethylene.With its functions they cope very well.Belt borders may have different widths.The height of the curb and in the bathroom is different, so you will find it is the product of the size that you need.It is very convenient from a practical position.
Installation sealing tape is even easier than installation of a plinth made of plastic.While this border is self-adhesive base, to improve the reliability of the border belt use simultaneously with a special silicone sealant.
Kerbs of natural stone
In addition to these models curbs you can find more solid options.It curbs made of marble and granite.Luxurious material is travertine stone.The look of natural stone borders elegant, giving the bathroom design refinement.If you decide to build expensive interior, remember that you want to pay attention to the unity of the sanitary equipment and finishing materials.
If you prefer the curb of marble, the tub should be marble, another expensive accessory will be the only source of pride in the bathroom.In addition to the unique natural beauty of natural stone borders also demonstrate the excellent quality.
Installing ceramic curb their own hands
Advantages ceramic border
Often people prefer it curbs ceramic bath, as compared to the plastic products they have a lot of advantages:
- Masters argue that plastic curbs slowly pass water.Ceramic curbs this deficiency deprived.
- If the bath is set far away from the wall, the installation of PVC profile is not possible.In this case, it is recommended to fill voids pieces brick and curb selected from ceramics.
- Ceramic borders demonstrate high durability, so the best solution would be during a thorough renovation.
- Pottery characterized excellent technical characteristics, which are due to the chemical composition of the material.This high resistance to deformation and rupture, greater hardness and durability, lack of response to environmental factors.
- Curbs plastic quickly "turbid" and acquire the characteristic yellowing color.But pottery retain the original color during the whole service.
- range of ceramic baseboards really impressive.They come in and white and colored, textured and without texture, convex and concave.
main drawback of ceramic curbs is a low impact resistance: they collapse when hit heavy object.However, if you take care of the finish, it does not hurt.
Preparatory work for the installation of ceramic frieze prepare these materials and tools:
- Silicone sealant, preferably one that has special additives that prevent the development of mold;
- Ceramic borders with a small margin;
- Tile adhesive;
- emery bar;
- sealant extrusion gun;
If you bought a sealant in the tube, you can put a border and without a gun.To set the border on the tube 2-3 spent bath silicone sealant 50 ml.
number of borders for processing interface between the bath and the wall is calculated as follows:
- Measure the three sides of the bath, which are in contact with a wall of the premises;
- Divide the result by the length of the curb.
- Round the value obtained in a big way.
- Add to this the number of skirting a couple of articles in case you finish damaged or broken.
Installing ceramic tile border under
curb Installation of ceramic tiles made by this way:
- work on the installation of ceramic frieze start of the harvest.Along the perimeter of the bath clean from dust and dirt are the places that are in contact with tiles.Wipe the surface dry and degrease.
- then apply a coat of sealer, using a special gun.Gap fill evenly.To align using a spatula.You can also smooth the sealant is dipped in the water by hand.At the same time there should be no gaps, because through the smallest gaps will leak water.
- While the sealant hardens, prepare tile adhesive.Carefully follow the instructions on the package.The adhesive must hold the trowel well.He must not crack when you knead it by hand, and to spread.
- Before packing products cut its one edge at the junction.Cutting should be at an acute angle of 45 °.It is recommended to use the grinder with a diamond disk.Also for cutting ceramic border pliers can be used: make product marking at 45 °, gently Break off small pieces from the curb of the drawn line, if "gnawing" them.The edges on the cut abrade using emery bar.
- customize corners abutting each other in pairs.Since the gap between them will be minimal.If you have to make two joints, cut two pairs of ceramic borders.
- Cover the back side of the border with adhesive using a spatula.Stick to the joint border ceramic and remove excess adhesive.Starting with the recommended angle.Place the following products analogously.After laying the surface should be wiped with a damp cloth.
- Make sure that they fit with each other tightly as possible.There are no gaps between adjacent products should not be.Useful for you to know that during the installation and alignment of parts can be a little tap on them using this rubber mallet.
- After curing of the adhesive the next day abundantly pour water laid corners.So you fix the adhesive stronger.If you have small passages and gaps between the tiles and borders, should apply the silicone sealant.You can also use the grout that is left you after the installation of tiles.If such grout is not, choose a composition that has a similar tone to the already used.
Installing ceramic tiles on the border
install curbs of ceramic tile is much easier:
- Thoroughly clean the surface of the bath and tiles that have already been laid on the wall, degrease and start gluing the curb.
- Then treat the wall, which will be attached product, waterproof glue.The most famous of this type of adhesive - liquid nails.After smear the wall, wait a certain amount of time, as indicated in the instructions.
- Take then the ceramic area and press to finish the wall.Is pressed against the tile, as closely as possible, until the glue sets.On the strength of that you will spend to press the curb, and the properties depend on the curb, associated with the inability of water penetration into the gap between the wall and the bathroom.
- When mounting the curb on the tile is recommended level.Remember to remove the excess glue on time.
- After the adhesive has dried, cut the seams with special means for extending the service life of the ceramic border.
installation of plastic curb their own hands
Currently, the range of home improvement stores are two kinds of plastic parts: border of PVC in the form of a self-adhesive border area and in rolls.The price of plastic is much lower self-adhesive border.After all, it is not in itself responsible for protecting the surface from water.These functions are performed by silicone sealant, and the area of plastic - only decorative element for masking the sealant.But to install the self-adhesive border for a bath do not need anything from the fact that the need for mounting brackets.
If you are interested, both stuck on the bath edge PVC, proceed in the following sequence:
- Wipe with a dry cloth surface of the tiles and the bathtub rim to house the curb.Make sure the surface is completely dry.Slot insulate aquarium sealant and wait until it dries.
- Then measure the length of the bath with a tape.Then, measure this value on the curb and cut the excess material.For convenience, cut the profile into pieces that are equal to the sides of the bath.Both ends of the rasp corner at an angle that is 45 degrees.
- Before the installation of the plastic plinth stick on the edge of the tub masking tape - 2 mm above and below the corner.This is done to protect the enamel bath from soiling the adhesive.And he curb stick tape.
- Apply the product between the wall and the bathroom, firmly onto.Then fold the edge up a little corner, to form a small space between it and the tiles.Put the gun back to extrude the sealant.After completing the recommended seam sealer smooth using a spatula.Repeat the same steps with the bottom of the curb.
- If you are working with an assistant, it is very handy.After pressing force determines the quality corner gluing PVC curb bath.Now you can remove a layer of tape.
- Plastic curb Tile set also at the stage of installation of tiles that hides part of the corner.This method is considered more reliable for the purpose of waterproofing.However, this border will be replaced entirely with tiles.
plastic corners, which are mounted on the tiles can withstand only a year of operation, maybe a little more, and then they have to be replaced.If you do not fit the plastic border, give preference to ceramics, which will cause any trust.Ceramic corners easily with proper care will last up to re-repair in your bathroom.