To get rid of excess moisture, mold and mildew, as well as to create a good circulation of air, made to equip in a bathroom by installing a mechanical ventilation hoods in the vent pipe.It is better to deal with the case in the repair of your home or bathroom, because installing the fan in the bathroom, it is desirable to foresee.It does not require the developer a lot of costs, and will not be superfluous.
- The need for mechanical ventilation
- Installation requirements for drawing
- Fan connection to the power supply cord
- light source
- series switch
- Self inclusion
- Laying wiring
- Site Preparation fan
- Mounting fan in the bathroom
The need for mechanical ventilation
forced ventilation in the bathroom to do when conventional ventilation is not effective.Telltale signs are faulty ventilation misted mirror, condensation on the walls and constant dampness.In the bathroom there is no fan odor and disea
If you encounter these problems, we must first check the vent for serviceability.It is easy to check: Hold the bars vozduhoobmennika ignited match.If the flame is pulled to the grid or go out, it's all right to vent, he copes with this area of the bathroom, and additional ventilation is not required.
And when the match does not go out, the flame rod to respond poorly, not Kolyshev, then it is time to clean the air ducts and exhaust fan.To clean the vent in the roof tapered lower the weight.In the absence of traction "in the old" can do a gap under the door - to saw a piece of the door to the bathroom in a couple of centimeters.
This "council" does not stand up to scrutiny.He does not always help, and secondly it should be remembered that the street 21, that many owners of expensive doors are installed, with the design, which involves closing them tight.How it looks like not even the most expensive door after such "modernization"?Maybe better to think about how to install the fan in the bathroom.
Installation requirements for exhaust fan to
bathroom doing his job efficiently, pobespokoytes on compliance with several conditions:
- necessary to ensure the presence of the duct that is functioning normally.If it is plugged, extractor will not help you.It is mandatory to clean the canal.
- Remember that the fan is pulling moist air replaces it with a new one.Thus, it is necessary to arrange the door to the bathroom a small gap, which has a thickness of up to 2 centimeters, or create a high-quality ventilation fail.
- key to good ventilation bathroom fan is properly selected, taking into account all the parameters of its operation: performance, noise performance, safety, functionality, quality and price.
Separate fan connection in the bathroom - it's not complicated, but useful as range hood requires every room of this nature.Select bathroom Weatherproof fan hydrostatic controlling indoor humidity.Such a fan is switched on their own when the humidity increases above the bath.
Self installing an exhaust fan in the bathroom involves cabling, expansion duct procedure, if necessary, connect the hood to the electricity and direct installation in ventilation duct, sealing the voids with foam, podshpaklevku if desired, after the formation of foam.The process - not difficult, and you can handle it on their own without the involvement of specialists.
To increase the effectiveness of the ventilation you need to on the one hand the bathroom was the entrance of air (supply air), and the other - the air outlet (ventilation exhaust).But too close entry and exit reduces ventilated areas.For the inflow of fresh air into the bathroom at the bottom of the door, set the grid.It can be purchased at the hardware store and install it yourself on any door or buy a door for the bathroom with an installed grid.
Fan connection Power
How comfortable would exhaust fan to use, it depends on the technical and functional capabilities as well as the method of its inclusion.Choosing a certain connection scheme of the fan in the bathroom, you need to weigh all the "pros" and "cons" as possible, because a bad option to alter is not always appropriate.
There are several options for connecting domestic exhaust fans for the bathroom to feed electricity.Many hoods are equipped with a switch in his body.Typically, this cord, which emerges from the housing.Pulling him, carried on or off the device.
However, such models are not always convenient, because the fans are often installed on the ceiling or other inaccessible place - over the bath or toilet.If repair work in the bathroom are not finished yet, the inclusion of this kind of drawing seems most profitable, can be installed instead of the cord switch in a convenient location, paving the electrically separate from the fan to him and hid under further lining.
The fan can be carried out simultaneously with the light sources.At the entrance to the bathroom and turned on the light hood is also included, and therefore when switching off - off, ie the switch is one for two.However, if the fan function "timer" is not provided, it simply may not be able to upgrade the air through to your departure from the premises.Besides, if you go to the bathroom at night, you woke all households annoying noise from the fan.
If no moisture in the bathroom and forced ventilation system is needed only when taking a shower or bath, the fan can be connected to a separate switch directly in front of the room.Set the input series switch, one key will be responsible for coverage, and the second - for the exhaust fan.
In this case, you will be able to include the fan on and off whenever you need it by pulling on the rope or by pressing a button.Automatic shutdown involves the installation of an additional motion sensor or humidity levels.The exhaust fan in the bathroom starts at the set level of humidity or in response to movement of people, and turns off after a certain period on a timer.This technique is quite handy, but not available to everyone, so rarely used.
By mounting the fan in the bathroom and its connection to the power supply, it is necessary to comply with all safety standards.Before you start is to make sure that the electrical network is turned off.When connecting contact wires is not recommended to use the "twist" and a special terminal strips, which provide a more reliable contact.
to the installation of exhaust fans move more copper wiring.At cosmetic repair bathroom tiles without changing the wiring is necessary to let the top of the tile.In order to disguise the maximum cable you can send it in the plastic box.To mount the fan can start after connecting the unit to the mains.
Site Preparation fan
most convenient place to install an exhaust fan in the bathroom considered outlet port facilities, leading to the common shaft.Such a technological hole is present in almost all the apartments to create natural ventilation.Standard vent capable of providing the passage of air, which is blown by fans with a capacity of no more than 100 cubic meters per hour.
To install the hood in the hole ventkanala it must be chosen taking into account the diameter of the channel-fitting machine.The diameter of such openings tends to be 100, 150 or 125 millimeters.
If the diameter of the duct is less than the diameter of the exhaust fan, you can easily fix this, you need only to expand the hole puncher.If it turned out a larger diameter than that of the fan, pick up a plastic tube or a corrugation diameter drawing and insert it in the hole.
Then seal the void around the pipe by means of foam.After setting, cut the excess foam with a sharp knife and podshpaklyuyte if necessary.Putty is necessary only in a situation where the size of the hole is larger than the ventilation grille.If
bathroom in your home is too high, then you are advised to buy a more powerful exhaust fan.In this case, for the installation of such a device need extra punch in the wall vent.The same procedure can be trusted by qualified professionals.
Mounting fan in the bathroom
Before you connect the fan in the bathroom is complete check-insert instructions, which described in detail the process of installing and using the machine in Russian.Products that are no such instruction can not be qualitative or importations into the country illegally, and that provokes a lot of problems with their maintenance and repair.
Installation drawing in the bathroom on the time it will take you no more than 15 minutes.Remove the front cover of the machine.At the junction of the device to the wall, apply a silicone polymer or a special glue.Plastic fans are very light, so this method will secure enough.
Next, insert the fan into the pipe, corrugated, or directly into the hole, press firmly for a few minutes to a wall and attach the screws on the front cover, they often come with a fan.To extract through a skylight in your house did not penetrate various insects, install the fan before attaching the cover mosquito mesh.
Now you know how to install the fan in the bathroom.In exhaust fans designed for bathrooms, many advantages, but the practice is known quite a big disadvantage - high noise characteristics.Switch off the instrument to turn only a few ways: you can vent to decorate a special sound-absorbing material, or installed directly behind the fan silencer.