efficient home heating with minimum wastage - a perfectly natural desire for each host.If you are still in search of a suitable heating equipment, be sure to turn your attention to the heaters - reliable, easy to use, safe equipment.Progressive Europe uses them to heat apartments and offices for decades.And it is worth noting, very successful - numerous studies have shown that the cost of heating with convectors are reduced by 30-40%.
What convector heating?This device, wherein heat from the heating element or heating medium is passed into the room on the principle of convection.As you know, the cold air is heavier and denser than warm, so it is always at the bottom of the room."Contacting" hot heat exchanger located inside the enclosure, the cold air mass is heated and begins to move up.Thus, the "activated" convector creates a continuous stream of warm air, which is due to occur and space heating.
Some models convectors can be equipped with buil
- What type of setting most preferred?
- Heaters - sales hit
- Water units and their benefits
- Gas installation - what they are good?
- fan convectors - the smart choice
- How to avoid mistakes when buying?
By way of installing heaters are divided into:
Depending on the method of heating appliances may be:
Convection in such devices can be:
- natural (no fan);
- forced (fan).
What type of setting most preferred?
Wall convector - the equipment, which is selected to heat the most.It takes up little space and securely fixed to any suitable vertical surface.The optimal solution is to install such a device under the window - here he can create the most "powerful" thermal curtain will look quite harmoniously.
Floor samples are usually different from the wall only by the presence of special feet for mounting on a horizontal surface.
main common advantage and wall and floor models convectors is the ease of installation.
If a number of reasons the purchase of equipment needed to produce immediately and from the place of its installation, you can not decide, it is best to opt for a "universal" convectors.Such devices can be like to hang on the wall or installed in any convenient location on the supplied them with legs or wheels.
modern and stylish solution for heating rooms with large-area (notably in "silnoosteklennyh" buildings, when, for example, the wall model is simply no place to attach) can be recessed convectors.Visually, they are mounted in the floor decorative lattice, from which "comes" intense flow of warm air.But just all looks only at first glance.In fact, these units require specialized niches that are organized at the stage of arrangement of the sexes.Qualitatively perform such work without a certain knowledge and skills, it is very difficult.Besides, it takes time and is not enough.
worth noting that the "integrated" heaters can be not only an underfloor - convectors there that you can successfully "hide" in the decorative elements of the room - in the plinth, window sills, podlestnichnye niche.Devices stylized plinth at the moment are a real rage in the convection heating.The cost of such a decision is not a budget, however, due to the fact that in the market there were interesting developments on the domestic manufacturers, the best option for the family budget is not difficult to pick up.
Heaters - sales hit
Heaters are available and extremely simple structure.They do not require any complicated wiring pipes, no gas supply to all the "bonus" of complexity (engineering, commissioning supervisory services) - and as a result, are most popular.
constructional unit of this type is the metal case in which "entered" a heating element - PETN.The entire surface of the heating element is equipped with plates or else it is completely placed in an aluminum casing - it is necessary to increase the surface area of heat transfer.
Process Heating Heaters carried out as follows: through a small grate at the bottom of the unit, the cold air "passes" to TENu;where it is heated to a predetermined temperature value, and rising, it goes through the upper "blinds".
- Democratic convector price;
- ease of installation;
- ease of use;
- high efficiency;
- not need any special maintenance.
- decrease in efficiency over time;
- significant energy consumption;
- ineffective in areas with a large area;
- not always suited to the role of the main source of heating.
Water units and their benefits
Water heaters - a great alternative to obsolete batteries and radiators.They are well functioning in the autonomous heating system of a country house or apartment.These units consist of:
- body (box of stainless steel);
- heat exchanger (copper pipe, which is to improve the heat transfer has aluminum fins improved profile);
- protective cover lattice (usually or decorative);
- connection nodes;
- venting valve.
worth knowing!Floor convectors water heating - a collapsible settings made in a single block.
To effectively control the intensity of the heating air in the room all the modern water heaters are equipped with air dampers.Connect the equipment can to any type of feed pipes - of any material, any diameter.
- rapid heating;
- high efficiency;
- light weight;
- compact size.
- complexity of installation;
- high price.
Gas installation - what they are good?
Gas convector - perhaps the most economical of all the device convector type heaters, which allows you to be totally independent from the "quirks" mains (exception - models with fan).
- highest heating efficiency;
- affordable price;
- small cost to pay for heating.
- according to the home-aesthetes - the bulky appearance;
- complexity of installation;
- paperwork before installing;
- use of explosive gas requires the utmost vigilance during installation and during operation.
Important!Gas heating equipment can "eat" not only on the gas network, but also from the cylinder.
fan convectors - the smart choice
and electric, and water and gas convector can be equipped with fans.Is it useful "bonus"?Definitely.It allows you to make the process of heating the premises more comfortable, profitable and operational.
Firstly, the fan significantly increases heat transfer device - this is due to a more intense air to the heat exchanger and, accordingly, from it.Calculations experts argue that the convector fan raises the temperature in the room to a comfortable value much faster.
Second, the fan cools the heat exchanger.This function has a direct impact on the durability of the entire device.It is no secret that water and especially powerful gas units can get very hot heat exchanger housing.A high temperature - is the risk of sudden failure of any material: and none of the protective coating will not save.Work heater reduces the load on the heat exchanger and substantially increases its service life.
worth knowing!If the design of the convector fan is provided, this means that the device is "elektrozavisimym."
How to avoid mistakes when buying?
Before you go to the store for the convector, you need to clearly define their abilities and desires and objectively evaluate the conditions in the house (apartment).If the gas is brought to the building, and you need a constant heating, the best solution is to buy a gas convector.If the gas is not let down or in a stationary system is not necessary, it is best to give preference to electric models.
Regarding the choice of a particular model, you should be guided first and foremost, as though it may sound corny, on the brand.If the build quality products and the price you are completely satisfied - you can safely pay for popular among goods!