Plastic wall panels - a low-budget way to upgrading and improving the residential, office and public premises.Care coverage is not difficult: the coating is washed with water and powder, chemically stable, belongs to the group of materials of medium fire risk, do not create an environment for the development of mold, bedbugs, cockroaches and beetles, bark beetles.High moisture resistance allows the use of panels in the showers, bathrooms, kitchens and public areas.The main advantage of the plastic wall panels - they are attached, even on curved walls.Coverage of this material transforms the room adds aesthetics and corresponds to the modern timeless.
- types of plastic panels, decorative wall
- installation options plastic wall panels
- professional method of fixing plastic wall panels
- Installation of plastic wall panels construction staples
- How to install wall plastic panels using adhesives
- The calculation of profiles for lathing
- packing crates profile
- Production and installation of stiffeners
- installation of wall panels in the profile
types of plastic panels, decorative wall
- are two types of panels: internal and external needs.External differences between species barely noticeable.The main difference - the composition and quality of the material.
- panels for external works have a solid structure, ustochivy to ultraviolet rays and temperature changes.
- panels for interior work - have high environmental, thermal conductivity.
material of both types is used to protect against noise and cold.Color solution has a whole range of the spectrum, the selection of color schemes for the interior is easy.Price
plastic wall panels from $ 3 per m2.The cost of finishing the plastic panels from $ 1 per square meter.
installation options plastic wall panels
For installation of wall panels are not spent a lot of hours.They quickly put on the prepared crate.A room with a total area of 40 m2 wall finish in 3-4 hours.The main costs fall to the time the production of crates to 10-20 hours.
Crate - special foundations, strength and quality of its fundamentals affect the life of the coating.The method is applied to the walls of the curvature of the surface, poor plastering, plain basis.Where appropriate, laying between the wall and finish wiring.Communications or finishing soundproofing material.
crate is made of wooden bars 40x40 mm:
- Attaching furring for vertical wall panels proizodit the horizontal level.The basic rule for the installation of lathing - compliance with established perpendicular to the finish.
- avoid deformation panels on any objective reasons, to maintain a distance between the bars up to 500 mm.
- Fastening boards to the base made screws.
- To extend the longevity attached crate cover waterproof and fire retardant mixture.
wall mount plastic panels on the crate:
- Installation of panels made from the room.
- first panel set "ridge" in the corner.
- The grooves drilled holes for screws.
- fasten the panel to the sheathing screws.
- Install the second panel.The crest of the groove of the first panel, covers, masking the mounting screws to the sheathing.
- complete the final design of the interior Plinth, hollow, angular bars.
- They attach to the wall panels with screws or liquid nails.
professional method of fixing plastic wall panels
This method is applied installers for installation in public or office buildings.The method:
- are installing the final elements of the decor to the sheathing.They are fastened with screws.
- panels are folded and inserted into the arc groove elements.
- panels are held at the top and bottom, and the remaining area is not secured.
Quick installation method allows you to finish the work for 1-2 hours in a room with a total area of 45 m2 of walls.This method only applies to plastic wall panels having high characteristics of elasticity and bending strength.
Installation of plastic wall panels construction staples
method for flat, smooth surfaces.Construction bracket easily into the wall material and does not require much effort.
- Level Panel noted the exact position of the coordinate axes.Mark up the angle from which the installation will go.
- Through staples are driven, the amount of not less than 4 units.For the high walls of the recommended number - 6-9 pieces.
- brackets are attached with nails.Marking is sized nails and staples protruding portion.
- crest of the first panel should enter the brackets.
- second panel plant in the first groove.
- line is planned to install the brackets for the third panel.
- Further installation passes under the scheme described above.
How to install wall plastic panels using adhesives
method is used to smooth the walls, in the absence of special tools.The adhesive composition used for coating the surface of the wall.
- Wall shpaklyuyut previously degrease the surface and allowed to dry.
- For absorbent solution and the moisture of the walls carried out treatment primer corresponding to the destination.
- Bred adhesive according to instructions on the package.
- applied to the surface wall paint roller, brush or spray-paint sprayer.
- do on a clean surface markings vertically and horizontally.
- covers a portion of the liquid adhesive.
- adhesive layer is fixed on the panel pressed for the time indicated on the package for setting the base.
- coat with the next section, a second panel.
- Connect panel slot in the comb.
method eliminates the need for mounting the panels with screws.
for posting on the wall with plastic panels of decorative and functional shelves, hangers advance make nests for mounting in a wall of rough, and not finishing.Holes are accomplished deep.Then, plug or screw clogged.On the plastic surface has been a slight punch a place to display fixture.
How to fix the plastic wall panels to metal profile
advantage of installation on metal profile:
- Crate profile is not subject to deformation in contrast to the wooden beams.
- metal sheets cost less than the price of high-quality wood material.From
- profile design is made with high stiffness parameters.
- Crate of metal to withstand heavy loads vertically and horizontally.
Metalloprofil produced different sizes for vertical and horizontal applications.
calculation of profiles for lathing
From a selected range of a certain kind of profiles, and then calculates the quantity.
Example of calculation for wall 2.75h6.0 m:
- distance between the posts is taken equal to 50 cm.
- required for mounting such a number: 600/50 + 1 pc.= 13 units.
- standard profile length is three meters.For blanks are cut from a standard length of 25 cm, length of rail receive 275 cm.
- Professional Profile trimming is done after setting the zero level and the determination of the height difference for each surface.
Do not do to save the distance between the rails 1 meter.The larger the gap between the gratings, the lower stiffness parameter as a whole.For walls in residential and official premises frequented ideal, time-tested length, the value is 500 mm.More distance is kept for ancillary and household outbuildings.
- horizontal components of the calculation is similar, only the height of 275 cm is replaced with a standard length of the profile - 300 cm: 2 x (300/50 + 1) = 14 units.
- from the floor for horizontal guides kept a distance of 50 cm. From the mid-to-ceiling walls and maintained a distance of 25 - 30 cm.
Do not just cut the estimated number of guides.It should be cut as the work.Adjust the blank of 2.75 meters will not be possible at Elevations in the room.
packing crates profile
- Set guide ceiling profile.
- to the concrete surface profile is attached dowels least cheiyreh places.The second profile is set back with the first.Reminder: the length of the wall - 6 m, length standard profile - 3 meters.Ceiling required 2 units.
- profiles are aligned with high accuracy.Their installation depends aesthetic design of future walls.
- to the attached guide ceiling suspended plummet.Vertical Spacing is performed at least three marks.
- on labels are set to guide the sexual surface.
- profile on a wooden floor with screws or dowels beaten.By the concrete floor is not dependent on the topcoat: linoleum, laminitis, tile profile is attached similarly PBH ceiling mounting.
- As a result of the two troughs are obtained: one at the top, at the bottom of the second.These troughs are inserted settlement of 13 units rack.
- done marking chalk.
- The point of installation is hung a plumb line.Measure the length of the rack.
- tin snips to cut the standard profile of the measured interval length.
- slightly sloping profile, set in the period of the guides aligning the vertical visual.A more precise adjustment of the level of performing.
- used for fastening screws.Shurpovertom make bond.Each guide unit fasteners spend 2-3.
Production and installation of stiffeners
Ribs additional rigidity to which you are installing the wall panels, cut off as the execution of works and the place of its execution.Installation start from the wall.In the first vertical post has a groove, and the second it is not due to the orientation of all racks in one direction.According to the classical technology required to install two uprights so that the cut had the appearance of two connected and deployed opposite the letters "P".Two units significantly increase the cost profile crate and do not have a significant impact on the increase in structural rigidity.With one profile form a stable and optimal stiffness crate.
alternative to the second guide area or segment of the profile of 70-100 mm.
- Screw the corner or cut to the back of the upright.Mates to have a rib.
- Do the same for all elements of crates.
technique is tested and proven its effectiveness in creating a low-cost solid lathing.
horizontal track segments set visually, without level.The main thing to set vertical guides.Position ribs is not critical.
installation of wall panels in the profile
designs a plastic wall panels.The size of a standard sheet 122h244 cm. Dimensions of the dial pad are more suitable for describing an example.Selected sheet width of 300 mm and a length of 3000 mm.The extra length is cut with a hacksaw with a fine cloth.Measurements of length is performed for each area to be able to adjust the height differences and uneven areas.
- installation of the panel are off the wall.
- first panel with meticulous precision set by level.When careless mounting plate starting at the end of the wall formed a huge run, forcing to disassemble the entire site and done a remake.
- Exposed panels are attached with screws to the stiffener or vertical rack.
- Insert the second panel in the groove of the initial sheet.Attached.
- Further action is repeated by the above procedure.
- Near the end of the wall is usually a gap narrow for the entire sheet.Measure the width of the strips near the ceiling, the floor and the middle height.From cardboard cut out template.Is applied to the slot, check the right size.Cut in half and the panel is inserted into the slot.
- finished setting one wall panels make installation on these surfaces.
Ugly narrow crevices in places dock panels to the ceiling, and floor angles are masked with plastic trims, baseboards and corners.Mounting and fixing are performed by special clips.Such a method to quickly and easily removed items.
Plastic wall panels, photo space with an interesting interior decoration decision will guide when choosing your own project.