bath or sauna has been built, and the consumption of too much heat?I would like the room to warm up faster and the heat kept longer?Or construction in full swing, but the problems are the same.The ceiling, walls, floor - all part of the building baths, in both cases, we need to insulate.Although it is believed that floor insulation in the bath - a waste of time and money.Moreover, due to the warming of the floors start to rot and break down quickly enough.Share truth in this, but modern materials and proper floor insulation bath avoid these hassles and make the room even warmer, and the washing process - much more comfortable.
- Thermal insulation of concrete floor in the bath
- Warming of the wooden floor in the bath
process of insulation is directly dependent on the device sex.There are two options: concrete or wood floors.
concrete floor in the bath
Wooden floors in the bath
In any case, insulation floor bath with hi
Thermal insulation of concrete floor in the bath
If you decide to build a concrete floor, it is assumed that first poured the foundation upon which is placed a concrete floor slab, the third layer is the insulation, which is laid on top of the insulation, followed screed with reinforcing mesh,Sixth layer - floor heating system, the latter laid tiles.Because the tiled floor slippery and cold, it is desirable to further cover the bars of wood, which if necessary can be removed and dried.
at warming the concrete floor in the steam room often used as a thermal insulator perlite, glass or expanded clay.The layer of insulation is laid between two layers of concrete.An exception is a concrete block, which is "kneaded" directly into the concrete.If the selected perlite insulation, the process of working with them it is necessary to close the premises, asbecause of its ease of material can easily shatter.However, due to the low thermal conductivity of the perlite is often used to achieve this goal.Initially perlite to be mixed with water in a ratio of 2: 1, the resulting solution was added to the cement.The mixture was thoroughly mixed until a homogeneous mass, then it is added to approximately 0.5 liters of water and additional bucket perlite.In the resulting insulation solution water must not stand.The finished mixture is spread on a thin layer of concrete slab.To the solution is completely dried out, it will take about a week, at the end of this period, a second layer of concrete is poured.
Modern alternative to mineral wool and expanded polystyrene loose sided window appears.During the warming plate used a thickness of 10 to 25 cm or spraying material.Recommended thickness of 10-15 cm. The most popular brands:
- Ursafoam / Glascofoam;
- Ursa XPS Natur-III;
In this material a lot of positive qualities, namely lightness, durability, excellent thermal insulation, economical in use.
However, some difficulties may arise in the process of warming the floor in the bath with the help of foam, becauseIt needs a perfectly flat base.The process of using polystyrene insulation is similar to that described above.
Warming of the wooden floor in the bath
Although concrete floors last longer and are more convenient to use, warm up many fans still opt for wooden floors.Furthermore, such floors are environmentally friendly, they are, unlike cold tiles long retain heat.The most suitable species of wood are the larch, fir and pine.Not suitable planks of oak, basswood, aspen and poplar.It is believed that the tree was in the bath begins to rot quite quickly, but with the right approach and can be treated with an antiseptic flooring and protect against rot and fungus.Directly in the steam room floor to handle an antiseptic, or other substances not recommended, as harmful fumes adversely affect the skin and lungs.In this room it is enough to use well dried boards are not progniyut, but eventually darken.
design wooden floor in the bath is not much different from the concrete, but instead of slab beams are placed, and on top of them - the skull board.Directly heater goes over the sub-floor.As the insulation in this case it is possible to use the same expanded clay, sand, slag, glass fiber mat or mineral wool.
Paroizolyatorom often acts asphalt.
When laying the floor in the bath can not forget about water flow.Fans of steam sometimes nailed wooden floor boards, using the so-called removable floor.Once the boards are wet, remove them and put out to dry, and stacked on the floor replacement.There is also a special technique to dry the wood floor.
Whichever option the floor for a bath you choose, it is better to warm it in the process of construction.How to do it with the help of Rockwool stone wool, look at the video.