material stores hit abundance range.In recent years, many domestic masters decide to renovate the interior of the ceiling with his hands.On the types of decor, features material rules and stages of work will be discussed.
- Glue ceilings Suspended ceilings
- coffered ceiling
- Suspended ceilings Stretch ceilings
- Rosettes, borders, skirting boards andother relief items
- Interior ceiling bedrooms
- ceiling in the kitchen
- Interior ceiling in the living room
Whitewashing the ceiling - one of the most cost types of coatings.In the post-Soviet space in this manner is still often refreshing like accommodations and kitchen interior.The ceiling in this case, looks modest, but neat.Whitewashing spend roller or spray gun.
work begins with the preparation of the base.It is necessary to conduct a rather hard work: plaster ceiling, hold filler surface.It is the qua
Among the shortcomings should be ways to allocate the fragility of the coating.On average, after whitewashing the ceiling retains the initial appearance of only 2-3 years.After this we have to re-coat the surface with mortar.The slightest contact with moisture leads to peeling of the surface and begins to "bubble."Therefore, in areas with regular fluctuations in temperature and high humidity mortar as finishing is better not to apply.Less of this method of decoration is also in the fact that the ceiling can be painted or wallpaper paste over only after careful repeated washing.Otherwise, the paint will fall unevenly, and the wallpaper peel off soon.
painting the ceiling - is also fairly common way of decor, a great opportunity to design the interior of the room with low ceilings.The cost of materials is low, and a variety of color solutions enables ceiling issue in any of the styles.
Much attention is paid to work on the preparation of the surface - putty and primer.Large cracks putty mask and fix a special mesh to prevent further damage.Minor irregularities sanded smooth.Then overlap primer for better adhesion to the surface of the acrylic.
At the final stage it is possible to put the image using a stencil.One of the relatively new trend in the ceiling design - decoupage.Ornament is fragmentary.For fixing the fixers used in acrylic spray.Perfectly smooth ceiling should be covered with primer, dry and only then start pasting decoupage card.
To make a two-tone roof and clearly maintain the interface between colors, surface in two steps.After drying one of the colors mark the contour masking tape and proceed to paint a contrasting color.
staining large surfaces it is advisable to carry out a large cushion and small - foam sponge roller or small.
Interior Decorating ceilings with wall also have to start with the leveling work.The process of pasting is not so long and time-consuming if you choose non-woven wallpaper light colors.
In operation without an assistant can not do.Wet wallpaper prone to deformation.Therefore, self-quality paste over the ceiling is almost impossible.Pasting start of the window.
This type of decoration is pasting rectangular panels or square slabs of expanded polystyrene or polyurethane.Grounds for finishing tiles can be anything.Concrete slabs, masonry or plaster should be well cleaned and primed with the adhesive to better lay down.The tree must be to infiltrate anti-corrosion and anti-fungal compound as a tile can be condensed moisture.
beginner mounting adhesive ceiling is better to learn from gluing the white tile.In this case it is easier to disguise slips putty.
Pasting the ceiling tiles diagonally start with the center of the room, locking the first tile at the intersection oboyudoperependikulyarnyh lines connecting the midpoints of opposite walls.The first tiles must be attached so that it coincided with the corners marked-up lines.Now sticking tiles along four axes, and then lay the tile, covering the remaining space.The remaining free space along the walls papered parts tiles, pre-cut pieces of the desired size.
for kitchens and bathrooms it is advisable to choose a laminate tile, resistant to moisture.Among the advantages of this material - ease of installation, durability, sound insulation properties and low cost.Damaged items easily replaced by another.A significant drawback is the tendency of the material to turn yellow under direct sunlight.
Installation of suspension designs - a great opportunity to disguise or hide the irregularities of the line of communication.The cost of such decoration varies and depends on the shape, color and surface texture and material type.
Suspended ceilings can be:
- the rack.
Application allows you to create virtually any design configuration.The sheets can be as simple or moisture resistant (greenish).Basic ceiling clean, eliminate cracks.Putty and make it perfectly flat no sense since the base is hidden.
First measure the height of the ceiling in the corners of the room.Once it found the lowest corner of the room, holding the markup is starting to him.With leveling determine rank.Along this line, attach metal rails.Each profile fix in at least three places.The result is verified by simple gidrourovnya or lasers.
now celebrate the axis along the ceiling profiles with an interval of 40 cm, then every 50 cm fasten hangers.Then you can start the installation of the main profiles.The transverse profile attached to the main, too, using hangers.
After mounting frame to fasten drywall screws.Distance from joints sheets of drywall to the corner should be at least 10 cm.
after these forward when the dust settles.Gruntuem joints sheets, then carefully their shpatlyuem.When the putty dries, hang the mesh again shpatlyuem.Now, sticking to the surface of a special fiberglass.After shpatlevanija prepared surface painted.
Interior living room with high ceilings adorn tiered design of the drywall.Make them on the same principle, using markup templates.
The material in this case are the thin metal kassetony.Obverse aluminum plate protected by a layer of paint.
Kassetony may be any shade, perforated or not, with or without lettering.They are easy to wash, it is not difficult to make out if necessary.Resistance to temperature changes - another advantage of this material.
popularity of this type of decoration is due to durability, ease of installation, and moisture resistance of the material.Ceiling coating is made of plastic, aluminum or steel strips.Strips strips can be placed along or across the room.
suspended ceilings Installation start with marking.Along the perimeter of the future level of mark up floors.The ceiling is decorated as follows: traverse mounted (carrying strap) with the slots, and then set the rack (until it clicks).To hide the joints of rails to walls using corner profile.Distance from suspension rails to the base slab should be 5-10 cm.
This overlap is suitable for any room.The basis is strong and elastic vinyl film.
First measurements carried out of the room.Before mounting the film to the base ceiling at a distance of not less than 5 cm from the "native" ceiling mounted frame of the profiles.The room is well heated, and then fixed in the grooves of the film itself.The gradual decrease in temperature promotes uniform alignment and tension of the film.
Vinyl can be any color, matte or glossy.In recent years, extremely popular film-coated, simulating a starry sky.Such ceilings are durable, not afraid of changes in temperature and evaporation.But by mechanical action, they are not stable, so before opening a bottle of champagne, send it to the side, not the ceiling.
Rosettes, borders, skirting boards and other relief items
stucco moldings and arches are the perfect complement classic interior well with the wallpaper with heraldic and floral ornaments.Although the ceiling borders can often be seen in the interior of many apartments, regardless of style decision room.Previously, these decorative elements made of plaster, but in recent years is extremely popular products are made of polyurethane.It does not require frequent maintenance, it can be washed and even paint.
lovers can try creative solutions to make stucco home with the help of moldings - silicone molds.To do this, you need only to fill in a special form and composition of the handle protruding relief acrylic paint when enough parts dry.
Interior ceiling bedrooms
choice of materials for decoration depends on the state of the ceiling and the overall design of the room.So, hide significant irregularities help construction of plasterboard, you can visually enlarge the space using embossed wallpaper with a barely noticeable pattern.Often, the design of the ceiling and the bedroom is used staining.
ceiling in the kitchen
The correct solution is to choose moisture resistant and washable material while for finishing dishes.Well suited for this purpose water-resistant paint.If you choose to paste over the kitchen ceiling tiles, it is better to opt for laminate samples.Plates of plasterboard - also a good option, but only for high buildings.
Interior ceiling in the living room to living room
better to choose a fancy cover.Again, much depends on the height of the room.Suspended ceilings or reduce the level of overlap.
you can paste over the surface of the tiles with minor defects.Such a method is well suited to freshen up the interior of the hall.The ceiling of the base in this case will not be seen.Tile great disguise small surface roughness.The choice of color depends on the preferences of the owner housing.This may be an imitation stone or tree structure, white or colored samples.
Do not be afraid to experiment!Try to decorate the ceiling mirror tiles, decorative plaster, or drape it with a cloth.In this case, the interior of your premises will benefit.